Finishing
2,922 topics in this forum
-
-
This can of general HP poly is not very old, and I take good care of my cans and finishes. Check out how much crud I filtered out (after stirring) before loading my spray cup.
-
- 1 reply
- 2.8k views
-
-
I am getting ready to apply finish to my cherry coffee table build. I am thinking of applying GF Arm-R-Seal oil & urethane satin over a first coat of BLO. I like using a first coat of BLO on cherry followed by Waterlox as it helps the cherry pop. I thought I'd use a urethane on the coffee table to help with protection. My question is will using GF A-R-S over BLO cause a problem. Thanks
-
-
- 11 replies
- 3.6k views
- 1 follower
-
-
So I've just spotted an HV3500 on Kijiji for $75 CAD. The seller claims it's been used once. Has anyone any experience with these units? Are they any good?
-
- 1 reply
- 2.9k views
-
-
Hello, everyone. I am restoring the staircase in my 1924 home. The attached photo shows my problem. A previous owner painted around a stair runner. I plan to strip each stair riser, and I would like to do my best to match the original stain and look. But I don't know what the process was that the 1920s craftsman used. As you can see in the picture, I stripped one riser to find out what I am dealing with, I stripped the riser only using denatured alcohol. The alcohol got up the paint, the stain, and the shellac. I have rubbed the stain part with both naphtha and turpentine, but all that came up was something that looked like dirt. There was no visible fading …
-
- 4 replies
- 8.6k views
-
-
I'm building a Shaker style hutch for a friend. She wants it distressed and antiqued. Does anyone know of a good You Tube video on doing this? Thanks
-
-
- 6 replies
- 3.1k views
-
-
Hello everyone, I would like to thank you all in advance for any information you can give me on my project. I'm very new to woodworking and don't have too much experience with finish and with wood movement. I'm building a card box for a friend's wedding and need to know a good way to finish it that will prevent the wood moving too much after it leaves my very hot and humid shop in Florida. The box will live in an air conditioned house after I'm done. I'm using walnut and cherry for my materials and would prefer a natural looking finish. No stain or dyes will be used, but maybe an oil to bring out the warmth of the wood. Thanks again Sent from my SPH-L720 using Tapatalk
-
-
- 15 replies
- 3.6k views
-
-
Long story short. I've been asked to build sixteen walnut award plaques in the shape of the state of Missouri. I'm just doing the woodwork. The customer will attach the lettered brass plate. I was wondering if Watco Danish Oil would work as a viable finish. I'm looking for a quick and easy finish for this project. The customer does not want a glossy finish. Thank you for any help.
-
-
- 30 replies
- 7.9k views
- 1 follower
-
-
Hello, I have a acacia wood table which I think is sealed with a polyurethane. There are some knots(holes) in the table that I would like to fill with a clear liquid of some type that will also harden clear. Do you have any suggestions? Thanks
-
- 2 replies
- 2.9k views
-
-
Well, it's that time of year again. I just finished pressure washing my deck. What do you guys believe is the best deck sealer/protectant? I want something clear.
-
-
- 26 replies
- 11.4k views
-
-
I have applied a home made wiping finish made with equal parts polyurethane varnish, mineral spirits and BLO. After 2 days in 70 degree shop it is nearly dry on the white oak but still very tacky on the mahogany. What is wrong? Bad recipe or is it the wood? or maybe I did not wipe enough of the excess off. Ronn
-
-
- 4 replies
- 2.9k views
-
-
Hello, I'm new to woodworking but from what ive read online oil finishes will not work on bocote unless pretreated with shellac. I am making a diploma frame for the fiance. She chose the wood and I'm to make the frame. The problem is how to finish it. Ive only ever used polyurethane and oil based finishes on cheap woods. I would like to darken the wood a bit but still leave the bocote look intact. What would be the best way to do this. At the end I would like it to have a high gloss or sheen, what would be the best way to do that? sanding at high grit between coats of ....then waxing and buffing? Thanks, Derek
-
-
- 6 replies
- 10.8k views
-
-
Hi, I'm looking to create a bran wood shower wall...trying to achieve what people use tile but with wood. I would love to keep the raw wood finish. I thought about using cpes to soak my wood in but it will come expensive and then a arm and seal coat has finishing. What other option should I have? I dont need weather strong other than water on the wood. I plan to do tongue and groove to make sure the water doesnt go behind. I would use tile glue and screw to seal it to the wall make sure no air left behind. And probably use grout to fill any hole in the wood Any suggestion or concern? Thank you all
-
-
- 5 replies
- 4k views
-
-
My husband was in the back yard assembling and sanded oak boards for a wall cap (over the stairs). Just as he was preparing to move the piece indoors he was caught by a sun shower. He wiped the piece down and let it dry for several hours but when he stained it (Old Masters oil-based gel stain in "Spanish Oak") later that evening the water spots showed up clearly with darker stain. We are unsure how to correct this freckly pattern on the wood. Do we need to sand the piece back down to clear wood or is there another approach to correct the staining?
-
- 4 replies
- 2.9k views
-
-
I'm spraying a bookcase 86x39x12" deep. With shellac, so, I've got it lying across a couple sawhorses. Spraying it lengthwise I'm assuming is the proper way rather than taking lots of back and forth passes across the 12" depth. Do you try to make one lonnngg smoth pass without stopping or do half the length and move down and do the rest? I tried to do the whole length but find im not so smooth while moving my feet along .is that just a matter of practice or can you do half the length at a time? Also, (I'm lazy) if I'm going to recoat in an hour or two should I clean the gun or can I just spray some DNA through it and leave it?
-
- 7 replies
- 2.9k views
-
-
My husband and I recently stripped and restrained this dining room table. We use CitiStrip I think it's called to remove old stain, then sanded some. I have no idea what numbers we used sandpaper wise, We are NOT wood workers...this was our very first time trying. I feel the legs and table extensions took the new stain well, but the table top is blotchy and uneven. I have read so many forums and blogs my head hurts! I really want to fix this table, it has sentimental value. Can I just re sand and start again? Will re sanding cause the wood to just not take stain again? We did use a conditioner before applying the stain. I believe the wood is pine...but maybe not? …
-
My husband and I recently stripped and restrained this dining room table. We use CitiStrip I think it's called to remove old stain, then sanded some. I have no idea what numbers we used sandpaper wise, We are NOT wood workers...this was our very first time trying. I feel the legs and table extensions took the new stain well, but the table top is blotchy and uneven. I have read so many forums and blogs my head hurts! I really want to fix this table, it has sentimental value. Can I just re sand and start again? Will re sanding cause the wood to just not take stain again? We did use a conditioner before applying the stain. I believe the wood is pine...but maybe not? …
-
- 1 reply
- 2.7k views
-
-
My wife decided to get the kids a dog, which is great by me! Instead of buying an ugly ass black crate, I've decided to build a crate myself. Since the crate will end up in a currently unfurnished room for now I'm going to experiment with Tropical Walnut (which looks gorgeous and is on sale via Woodworkers Source). I'm going to test out several different finish combinations but expect it to be some variation of ARS, shellac, and poly (or lacquer). Still being a noob woodworker, I'm not super creative in my finishing. Question: outside of the dog eating the finish off the entire crate, will it be safe for the dog? Remember, if the dog eats the finish off the crate it …
-
-
- 18 replies
- 14.8k views
-
-
I am about to apply finish on the below. How can I neatly apply and not look like a 2 year old went wild with it? I have ARS oil base and endurovar water base finishes at my disposal. Brush or rag or foam brush? Spraying is not an option so please don't recommend it. I know that would be perfect for this but I don't have one and no one close has one either.
-
-
- 10 replies
- 3k views
-
-
Hello fellow woodworkers! I'm looking to build at least one of these in the very near future. If things go well I hope to build a second one. The article indicates a pre-stain which I can get easily at a local big box store however the stain I can't seem to find locally and even having a hard time finding a good option online. I have found it for about $82/gallon which is a bit higher then I'd like to spend. To protect everything (as it'll be outdoors) the Helmsman Spar Urethane I can get locally but only in quart sized. I found a gallon online at Amazon. I pinged Mark (Wood Whisperer) to ask what he prefers for outdoor projects and he suggested Epifanes. I looked it …
-
I have made a communion table for the church I attend and am so close to delivering it except for my final topcoat. I'm spraying the poly in my garage and because it's so slow drying I keep getting some dust particles on the top of the table. I used to spray lacquer and that was so easy compared to this, on hot days it would be dry in a few minutes, oh well. I have sprayed two coats of sealer, and now I must have 5 coats of the poly on, even used some vm&p naphtha 50/50 with the poly so it would dry faster which it did but, still some small particles lying there. I just sanded the top with 1000 grit and was going to shoot another coat but am wondering if I could just …
-
- 5 replies
- 3k views
-
-
In a nut shell, refinishing old pine table top sanded with 80,150,220 used Minwax pre-stain wood conditioner for oil based stain used Minwax oil based stain Sedona Red 222, kinda dark 3 days later from the side, all the knot holes and a few areas look shiny from the front , they look darker than the rest of the table top I was planning on finishing with polyurethane, I'm not sure what to do , if anything ??? Any input would be greatly appreciated. Thank You .
-
-
- 12 replies
- 3.1k views
-
-
Is minwax inferior to GF products? Is Minwax a hobbieist product while GF is for the "pros"? Why is it that Minwax is sold in every store under the sun but you have to order GF online unless you have a Rocklers or WC store near by? What exactly is it that makes GF better than Minwax? Not dising either one, just curious what makes one better than the other, and why the "pros" don't seem to use the Minwax products much.
-
-
- 23 replies
- 11.3k views
-
-
I have recently installed 3/4" T&G pine flooring from 75 year old loblolly pine(SYP). Milled, kiln dried. I need to know how aggressive I need to sand and stain and then finish with how many coats of polyurethene?
-
- 1 reply
- 2.8k views
-
-
Some of you know I like the "contrasting wood thing." I'm designing a hall table and want to make the top and legs of black walnut, and the skirt from ebonized red oak. I really want the oak to be BLACK, so I'm leaning toward using an ink-alcohol solution. The skirt will be a mortise and tenon joint to the legs. Will glue (PVA) still work during assembly? The tenon will not have a shoulder so it will be exposed. I want the line clean so was thinking that I should ebonize the tenon. I could leave most of it unaltered for the glue, but it would be good to know if the glue will hold regardless.
-
-
- 20 replies
- 5.8k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·