Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by Brendon_t,

    So I've never used any type of poly finish on any project worth a crap. I am finishing up a drawing table for my daughter and think it needs a film layer over the ARS to protect it from crayon/asker marks. Would some zar poly over cured ARS provide that?

      • Like
    • 6 replies
    • 2.8k views
  2. Hello all. I don't want to get into "what's the best" for sealing a maple edge grain cutting board as I use GF Salad Bowl Finish. My question is I will be selling the boards I make and want to tell the customer how to maintain their board. Now my thinking would be to apply another coat of GF on it however these customers probably won't have this available....so the question is can we apply mineral oil (which is available and cheap to the customer) OVER GF Salad Bowl Finish? Thanks for all the responses in advance! Jon

  3. Started by Ray,

    I've googled til i can't google anymore. And I've found many different opinions on the best way to finish purple heart in order to maintain the purple color for the longest period of time. I've come to the conclusion that the type of finish probably doesn't matter as much as the amount of sunlight exposure over time. Regardless, I'd like to see what kind of response I get on here. The project is a small hand mirror (12" x 6") and it will be entirely purple heart. What should I finish it with? Thanks in advance!

  4. Started by Neil D.,

    Hi Everyone, I'm a Cub Scout den leader and I'm working on some wood plaques for my boys when they cross over into Boy Scouts. I've got red oak that we've used a router on to create a design. The plan is for the wood to get some stain, but the router design to be painted. I've done some basic stain/poly topcoat before, but nothing with paint in the mix. I'm just looking for some advice on if this plan will work: Use some water to raise the grain and sand backStain2 coats of the Zinsser spray shellac (mostly to cover the stain and allow me to sand back any paint that gets outside the routed area)Paint the routed areaLight sand so the paint is only where I want itTop co…

    • 3 replies
    • 2.8k views
  5. Started by CJTango,

    Hi, everyone. I refinish and restore as a hobby and have only finished minor projects so far. I bought a federal style dresser that had a lot of damage to the mahogany veneer so I removed it. I found cracks in the underlying wood and am trying to figure a way to fix them so they aren't a problem for a future owner. I briefly considered laying new veneer, but would these splits cause a problem? If I go ahead and just paint, will wood filler or glue suffice in keeping it from splitting further? Thanks for any advice y'all can give!

      • Like
    • 6 replies
    • 3.4k views
  6. Started by lmb,

    I am refinishing an entire fireplace wall and attempting to get rid of the golden oak color. On the solid oak things look good using General Finishes Gel stain in Java. We aren't going for the blackness of the Java but just to overall darken up the golden oak a bit. Anyway, on the oak ply that is the backing above the mantle it is super blotchy. I followed the General Finishes Gel stain directions I've seen all over the internet and like I say on the solid oak things look good. My question now that it is so blotchy is a)do I sand it down to bare wood, use Charles Neil blotch control and then Gel stain again b)do I just sand it down to the previous scuffed up golden …

    • 0 replies
    • 2.8k views
  7. Started by Obscure Designs,

    I've been building farm tables from basic construction lumber. My style is to beat, cut, gouge, divot and generally distress the wood, then finish with stain and poly so that it looks like old lumber or old furniture. I like the look, but hate the plastic look of the poly as old furniture and wood didn't have a poly finish. Now I have a 100 year old slab of reclaimed fir I'm going to make into a coffee table. It is 4x48x17. I want it to be protected, but look old and not have the plastic film look. I want it to look satin. You know, like it's actually old. What suggestions do you have for finish and/or what process do you suggest for finishing this piece? (sprayin…

    • 3 replies
    • 2.9k views
  8. Started by boelkers,

    I've been building a full closet cabinet system for my wife and I'm getting closer to the finishing time of the project and I could use some help. The cabinets are built out of 3/4 pine ply with 1/4 backing. The face frames and drawers are being built out of pine. I hope to have the drawers and face frames done in the next week or two depending on my shop time. I built these with the intention of painting them white as that is what she wanted. What kind of finish can I use to make them white and also be durable and smooth? I don't have a sprayer so I know that will more than likely limit my options. Any suggestions would be appreciated.

  9. Started by prov163,

    My wife bought me one of the self contained Rockler HVLP sprayers on sale for $100 as a gift. While I wish she had bought me a Fuji Mini this will be a great way to learn which will help me decide what I really want when I buy the next unit So, I'm going to spend some time the next couple of nights practicing with water. I picked up some Hydrocote from HH to use on my next project. Can I spray it straight or will I need to thin it? If I need to thin it, how thin using a viscosity cup? Any other suggestions? Everyone says once you learn to spray you'll wish you'd started earlier. We're gonna see.

    • 16 replies
    • 5.3k views
  10. Started by zeboim,

    My wife and I went furniture shopping a few weeks ago and it looks like "distressing" wood is a big trend now. By distressing, I don't mean beating the crap out of the wood, but rather making it look like the paint is old and worn. I'm not a fan of this personally, but my wife is in love with it. Does anyone have any ideas on how to achieve this effect with the paint? I was thinking about hitting the painted surface with sand paper or steel wool, but my wife had mentioned watering down the paint. I'll add a photo for reference.

  11. Started by KLG,

    I'm new to woodworking and it's just a hobby for me, but I recently heard of people using coconut oil as a finish. Any thoughts or comments on that? I'm intrigued enough to try it on a scrap piece of wood, but hesitant to use it on a cabinet I made (soft maple) for fear of regret. Anyone know of pros/cons to using coconut oil?? Even educated guesses are appreciated! Thanks!

      • Like
    • 14 replies
    • 78.7k views
  12. Started by Adam Kyle,

    Hello everyone, I am currently working on a project where I am finishing Ash for the first time. I absolutely love the look of the wood before it is finished, it's deep grain and the contrast between the smokey and white colors are beautiful. That said, I've been playing with a number of different finishes and everyone has yellowed the ash. What finish would you recommend to maintain the color the most? I was looking into an acrylic-modified lacquer, thoughts? What experiences have you had? Should I even finish the wood? The ash is being used for some whiskey gift boxes. Thanks for the help!

  13. Started by Chris H,

    Hi Folks, I am working toward completing the gaming table with the bulk of the lumber being Cherry. As the wood is aging during the build it is becoming more and more clear that the grain has a decent amount of curl in it (picture doesn't really do it justice). I have had some trouble with finishing Cherry in the past, with it getting very blotchy on me. Is there a tried and true method that anyone has come to rely on for finishing cherry, especially with some figure in it? Ideally I was planning on a stain and spray poly to match our existing cabinetry. However, because of a couple "oops" during the routing of the top frame, I have added some walnut "accents" to ess…

      • Like
    • 2 replies
    • 3.1k views
  14. Started by Bobby Slack,

    bRand new bathroom ... Pain is peeling I was asked to meet with the painter. But before going it would be nice to have some ammunition

      • Like
    • 19 replies
    • 3.8k views
  15. Started by jimmyjwazup,

    Hello all, I'm currently putting boiled linseed oil on my new handle, and looking for a couple answers to some questions I have. I came across some people/posts in my searches of blo/turp being used over just blo. Is there any difference in feel doing this? Also, came across a recipe for tin cloth using blo/turp/beeswax and am debating on using that as a final coat for protection and also a bit of grip to the handle. Another question I have is: there are warnings to keep blo away from flame, is this still an issue for the handle after it has cured? No, im not planning on putting the handle in a raging fire, but am debating scorching/singeing the bottom of my handles to…

  16. Started by WoodlandRenovations,

    Hello Just got a new commission making a kitchen island. Half cabinets half shelfs. The cabinet portion is being painted and is being made out of maple plywood (customer choice) looking on instructional video or advice on painting/finishing. Going for a semi gloss look . Thanks in advance

  17. Started by Jerry_in_SD,

    I am building a new entry door (slab) out of African Mahogany. Typically entry doors have a exterior grade SPAR varnish for the exterior to deal with the elements. I live in Southern California and my entry way is recessed in such a way that neither sun nor rain hits my door. I did a sample with EnduroVAR and like the look. Has almost a oil like look given the amber tone they give EnduroVAR. Can anyone suggest why using EnduroVAR for my Entry door is a bad idea? If this door had to deal with the re is no question I would go with spar varnish. Thanks.

  18. Started by Bart,

    Hello all, I'm building a walnut coffee table and have in the past used resin to fill knots, and sometimes even inside a routed gully between boards to create a boat deck effect if that makes sense. In reality it's to hide my skewed woodworking skills as I still don't have a jointer - but it makes it look good. I've been using the disposable wood glue syringes to apply the resin. However, I'm going through them like there is no tomorrow and was wondering if anyone has a better idea. Less messy and able to store more resin because it goes off quickly. Bart

      • Like
    • 8 replies
    • 2.9k views
  19. Started by BobInAustin,

    In the WWFC build, Marc used 824 colorant in the SW CAB Acrylic Lacquer. The PDS says to use 844. I know exactly zero about finishing with this stuff so does anyone know why one would use 824 vs. 844? I'm going to try his finish as a first-time project for my HVLP.

  20. Started by clem,

    I've been toying with putting a coat of wax over a desk that I finished with poly, roughtly 10 years ago. The finish is worn to say the least. I've never used wax before, so I bought a can of Howard Citrus-Sheild Paste Wax and did a test area on the desk. I followed instructions, rubbed it on, waited 3-5 minutes (it was a bit hazy) and buffed out. It looked pretty good at first, then after an hour, all these light colored blotchy spots developed (picture attached). I tried another coat, just in case. When I rubbed on a new coat of wax, it took away the white blotches, then again, after an hour or so, the spots developed. It almost looks like the wax ate away at the…

  21. Started by WoodlandRenovations,

    Hello all, Lately my wife has been into a rustic phase and keeps begging me to make my projects for around the house "more beat up". I may be alone on this but I have a hell of a time hammering edges or skimming off a shaving or two with my plane on my neatly and perfectly planned out projects. Since all us married guys know the wife is always right. Right? I was looking for a how to or some sort of guidence on roughing up projects to give it a rustic aged look. Any help or advice would be greatly appreciated! David C. Woodland Renovations

      • Like
    • 15 replies
    • 4.5k views
  22. Started by oilag11,

    I'm finishing a dining table I made from reclaimed flooring from old boxcars. These planks are butcher block style construction , and the table top itself is maple with breadboard ends made out of oak (see attached photo). I'm trying to replicate the finish in the attached photo where the imperfections of the maple are highlighted without having much effect on the wood itself. My thoughts at this point are to go with a seal coat on the maple and then use a cooler-tint pigment stain and then top it off with waterbased poly. Is there a better way to achieve this look? Is the seal-coat necessary given the closed pore nature of the maple itself?

  23. Started by chrisb,

    My wife and I are putting up some simple shelving in our pantry that uses metal brackets with wood shelves. We were considering buying the shelving (particle board covered in melamine), but I happen to have some pine that might work instead. How should I finish the pine? I am hoping for both paint and stain suggestions so I can give my wife a choice. Chris.

      • Like
    • 4 replies
    • 3.1k views
  24. I'm re- finishing about 20 tables 30"x30" for a local restaurant. Stripping the old clear off (using my ROS) takes about 30 mins per table then restain takes another 30 mins. Spraying doesn't take long at all , clean up takes longer. I have about 3-4 hours into the job doing 2 tables. How are you guys coming up with a per table cost to Re finsih tables? I know new these weren't cheap ( mahogany tops) but don't want to price the job to high. I have an number in my head but want to see what you guys come up with . I know there's a ton of variables in that $ but let's here yours. Thanks

      • Like
    • 9 replies
    • 5.5k views
  25. Started by TonyCT,

    Hello all, I'm new to woodworking; had some basic tools that were just collecting dust, moved to a new home and decided I wanted a hobby. (I apologize if this is wrong forum) I have no concept of types of wood or how to plan a project. I am learning as I go and though the internet is useful haven't looked up any videos or forums (until this one) to learn. My first project is a work bench/table for more projects and tools. Went down to the home depot and picked up some lumber - bought 4x4s and cut them to about 4' trimmed the top to fit my 2x4 frame (3'x5') Also got some 2x8 and 2x10 for the table surface. I'm thinking of how to complete the project; i figure that I shou…

    • 7 replies
    • 2.8k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.