Finishing
2,922 topics in this forum
-
I making a few sets of the WFC 2015 kids tables for some friends. I went with box store oak plywood (instead of nice baltic birch) because in the past, they were relatively void free. However, this batch must've been different because there's quite a few things I'll need to fill and cover up - voids on the edges, as well as chipped off top layers. So, I'm thinking it's best to cover up the grain of the wood. I was thinking of putting a thin coat of drywall spackle on all the parts (to fill all the little voids) and then spray with a latex primer before final painting. However, I read elsewhere that latex paint will always feel "sticky"? I received a Fuji Semi-Pr…
-
-
- 6 replies
- 2.8k views
-
-
This is my first post. I need some advice, I'm refinishing a coffee table that was painted white, the lady wants it to be cherry. I have stripped it 3 times already. The top looks good and it ready for a finish, but the sides look streaky. When I clean it with mineral spirits they look fine, but dry streaky. Should I sand it down to bare wood or use more stripper or will cherry gel stain do the trick? Thanks for any advise Sent from my iPhone using Tapatalk
-
- 2 replies
- 2.6k views
-
-
Hi All, thanks to anyone who can give me some input here...I rent my apartment and my wife dragged a piece of furniture with a protruding screw across about three feet of hardwood floor. Left a 3mm scratch or so (pretty bad...and the landlord is gonna hit me on this one for sure...). I have no real experience with this type of repair, so, I went online, and decided to sand down the scratch, which worked and it is hardly visible anymore (see image), but that meant I now had some serious discoloration because i sanded off the finish and/or stain (not sure what is really on the floor..) I then went to home depot and bought a handful of stains (http://www.homedepot.com/p/Var…
-
-
- 12 replies
- 3k views
-
-
Long time lurker/amateur wood worker here hoping to gain from your experience. Say you woke up tomorrow and your shop had zero finishing supplies, no poly, no oils, no waxes, no shellac, no spray equipment. Just an empty shelf. You are working with primarily walnut and maple woods, making items that you want to have decent protection on (coffee tables, desktop items for office, small shelves, etc), but all interior projects. I know the list could go on forever (just like asking what tools a person needs), and I realize each project can need a different finish for a different purpose/look/feel. But generally speaking, if it were YOU, what MUST HAVE items/bra…
-
-
- 26 replies
- 5.3k views
-
-
I'm fininshing up a harvest table that I am making out of very old pine. I was wondering if anyone has done this and what type of finish too use? I was just going to use Poly but the more I read the more I am debating it. Does anyone have any advise for a finish for a harvest table? thanks
-
-
- 5 replies
- 2.9k views
-
-
I need a way to create a crisp, clean line where I'm applying Java Gel Stain on a maple leg. Painter's tape (green) doesn't seem to give a clean line. Any suggestions?
-
-
- 2 replies
- 3.3k views
-
-
I really like Arm-R-Seal (ARS) and I've read some recommendations to only buy the gloss version and add flatteners as needed. It's an interesting idea but I'm having trouble figuring out what to buy, where to buy and what the mix ratios should be so here are my questions... Is there a specific General Finishes, or other manufacturer product you can recommend that works with ARS? Where do you even buy flattener? What's your mix ratio?
-
-
- 6 replies
- 2.8k views
-
-
I am planning on putting a new top in an existing coffee table of mine (the wife's). She wants like the color of walnut and I'm pretty excited to build it. However, when it comes to finishing wood, I'm only familiar with poly. She wants the top to be as natural as possible. The piece of walnut I had is just a raw piece of wood and she wants it to look as close to that as possible. So what I'm looking for is suggestions on sealing it that won't affect the natural look of the wood. Thanks
-
- 11 replies
- 6.1k views
-
-
Making a picture frame out of some curly cherry and want a special finish. Don't want to go back to poly, looking for something new. Give me some ideas. Probably be Sunday before I get to the finish at the earliest.
-
-
- 25 replies
- 7.2k views
-
-
I know finishing can be very personal. Am completing a 13x46 table made from Cherry. Am lookingt for auggestions on how to finish it. I have used shellac in the past with good luck, but am looking for other options. What works for you? Thanx.
-
- 4 replies
- 3k views
-
-
Several years ago I succumbed to an impulse and bought some plum without a clue what I was going to do with it.I finally decided that I needed to do something and made a small box.I sanded up to 220 grit and everything looks good but I so much as look at it wrong and it's all scratched up. Just wondering if anyone had any tips for sanding and finishing this wood. I'm finishing it with lacquer now, will that reduce the scratching.
-
-
- 11 replies
- 3.5k views
-
-
So I am a novice trying to build a bookshelf. I wanted to create a piece that resembled the mid century pieces I have. I decided to go with a dark walnut danish oil finish on pine plywood. Well, the color is very dark and more "industrial" then I was wanting. I did more research and maybe I should have done teak oil or a chestnut color stain to get that reddish brown that is common in the mid century furniture I like. My question is, could I simply apply another stain on top of the danish oil finish? I cannot sand anymore off the plywood. Anyone have any recommendations? Thanks!!
-
- 2 replies
- 2.7k views
-
-
I built a pair of lamps out of walnut and cherry and now it's time to finish them. Was planning on using Danish oil for no other reason than I have some already. Would this be suitable for the interior of the lamp where a bulb will be. I plan on using led bulbs so the heat will be at a minimum, at least that's the plan. Won't let me upload pics.
-
-
- 5 replies
- 2.7k views
- 1 follower
-
-
Everyone have fun shoveling snow over the weekend? No time for the shop? Well, it's Monday and and a great day for some cyber-woodworking... Here's a Tip to forget the snow and start the week! Remember those planters from last September? Well here they are enduring this weekend's snow storm – I’m serious about my outdoor projects being outdoors 7x24x365... I've posted parts of my outdoor finish process, but it's ever been gathered all in one place... With this weekend's snow, what better time to talk about weatherproofing your outdoor pieces... Which sets-up today's Tip... For outdoor furniture, rot starts fro…
-
-
- 11 replies
- 5.3k views
-
-
Would this type of finish method be a good way to do wood kitchen counters? Or would that be overkill?
-
-
- 22 replies
- 4.2k views
-
-
Im new to this product and tried to for the first time. And I must say that I really like it? I'm doing a bar top for a friend and he did t want to go with a traditional polyurethane or shellac finish. But opted for a more natural oil look. While not my favorite look I know it can still be nice. But I wanted more protection than just oil finish for this as I made a solid 8/4 thick black walnut bar top. So after research I found watco's Danish oil. After using I still want a we bit more shine and protection of a urethane than I'm getting. After finding I can make this myself with tung oil, poly, and mineral spirits, my question is can I strengthen the poly side of the reci…
-
-
- 2 replies
- 3.3k views
-
-
I was watching Ellen's Design Challenge the other night where one designer used vinegar and steel wool to achieve a black matte finish. Can someone explain this process to me? Can you achieve varying degrees of oxidation (i.e. darkness)? Would you apply additional protection on top of it? Anyone ever use this technique?
-
- 1 reply
- 3k views
-
-
Last summer I built a screen door out of CVG fir. I decided to use GF's Outdoor Oil because I liked the idea of using an oil and figured I wouldn't mind re-applying annually. It also had rave reviews from many people. I think I applied 3 good coats. And of course this was in the summer time and I allowed for plenty of dry time in between coats. I did use some super fine steel wool in between coats. The door sits a bit protected as it's under a small porch, but the bottom half still gets wet from wind driven rain. Well, at the end of just a very short fall season (I'm in Seattle so from Sept to Nov we did get significant rain), there was a bit of "pitting." I'm not su…
-
- 4 replies
- 2.9k views
-
-
Hi everyone, I am very new to wood working. Have been researching videos and articles a lot and finally got started with my first project. I am using a dark gel stain on pine wood and last night worked on some test stains on a plank that will be hidden. The stain was fine yesterday, I applied it and wiped it off after 5 minutes. the colour was rich, no blotching so I left it overnight. Next morning, I tried to apply a coat of polyurethane with a foam brush and noticed that it was picking off the stain colour.. i was left with a much lighter and botchy stain. I do not understand what I could be doing wrong? is that normal? Should I have waited longer for the gel stain to …
-
-
- 7 replies
- 8.6k views
-
-
so a group of us at work just finished making 9 sets of cornhole boards, nothing too fancy just using dimensional lumber and pre finished ply for the decks. I am leading the mission - so far so good. The pine rails need to be finished out but the decks really don't need to be. Some of the guys are adding decals etc. the plan is to top coat and secure the decals with gloss exterior poly with 220 between coats. Maybe 4-6 coats. Probably will cut the poly to achieve smooth finish. My concern is the pre finished birch ply, never used it always used Baltic birch but needed 4x8 sheets to yield cost effective cornhole sets. The question is, ok just to rough the finished top wit…
-
-
- 5 replies
- 4.2k views
-
-
I just need to flush trim the MDF torsion box and add maple edging then I'm ready to finish the top. With the top being 48x72 I don't think my arm will be able to do a full passes across the top. Any suggestions to how to approach something this big? Do I do half passes of 2' doing one side first then the other? I figure this is the perfect project to practice something this big. I'll be spraying waterborrne semi-gloss poly which I normally use a 1.0mm tip. I didn't know if for something like this a 1.4mm tip might be better to get more down and slow the initial drying?
-
-
- 14 replies
- 4.1k views
-
-
I know I have to tape off areas where glue will be applied If I pre finish before glue up but what about If I pre stain before glue up, do I have to tape off the glue surface or will glue still work on stained surfaces? Thanks
-
-
- 7 replies
- 3k views
-
-
Note: I'm complete newbie on furniture restoration and I've just decided I'm picking this up as a hobby this year so pls bear with me while I bombard you guys with questions. Bought this table at a thrift shop as my first restoration project. The table has no loose legs and feels very sturdy and it is one heavy coffee table. I feel I can dance on top of this table without damaging it. At closer inspection, it looked like more complicated that I've expected. My first concern is, should I remove all the nuts, bolts and brackets before doing any work? Those things doesnt look easy to remove: This is the top view. These circular metals is few millimeter h…
-
-
- 4 replies
- 4.3k views
-
-
I have several waterborne test boards from when I was practicing spraying and I decided to test three of them with different finishes. They were hard maple with General Finishes cranberry red stain so should show flaws pretty easily. Each board had a different satin topcoat and allowed to cure at least 3 weeks. I put all the stain tests on each board and left it for 24 hours and here are the results. Test General Finishes General Finishes Old Masters Poly Enduro-var High Performance Denatured Alcohol 2 3 3 Mineral Spirits 0 …
-
-
- 7 replies
- 6.2k views
-
-
Hi i am new to the forum, so please be easy on me. I plan to make a grease pot as show on the woodwrights shop. My question is I plan to put mustache wax in it and I have concerns that the coconut oil and beeswax might go bad in the wood over time. Does anyone have experience with this? thanks
-
- 5 replies
- 3.1k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·