Finishing
2,922 topics in this forum
-
I'm trying to make the wood grain on a piece of blue pine Darken and pop out. The wood is a light grey color but the grain is red. I want to darken just the grain so I will have a more vibrant red to contrast the soft grey. I thought about mixing some dye (like trans tint) with a shellack. But I don't want to dye the rest of the wood just the grain. Can i dye the wood and let it soak into the wood and then sand it back and keep the grain with a deeper stained grain. Anyone that run across this issue and came up with a good solution or has just a idea that might work feel free to comment.
-
-
- 16 replies
- 73.8k views
-
-
I'm not a big fan of pine, but unfortunately I have to make a mantle-piece out of it. My big question is how I should finish it. I don't do a lot of woodwork but a few years ago I made a piece of furniture out of oak and did the whole wire wool, briwax, wire wool, briwax, wire wool, briwax...process and it came up so nice and shiny. I want to do the same to my piece of pine, but because it is a soft wood will it have the same effect? I hate the look and feel of varnish, so I would prefer not to use varnish, but it does need something to protect it from the scratches. Thanks.
-
- 11 replies
- 3.1k views
-
-
Hello all! I am having a hard time deciding on which sealer to use. It will be applied to a kitchen counter top made of maple butcher block. I would go with the waterlox but the client doesn't want that amber color that it produces but a more natural look. I could just stain it with a natural color then go over it with waterlox. I've used GF in the past and it looks great and shows more the natural color of the wood. I've used and read reviews for both and love both products and just can't decide! They won't be cutting the countertop, just normal wear and tear. I'm thinking either of them would work great.. Thoughts, suggestions, comments?? Thanks!! Jonathan
-
- 2 replies
- 5.8k views
- 1 follower
-
-
I'm looking for some opinions as to whether I should add a top coat to this project. It's made of oak and had a stain applied a few days ago. The door it's next to is the one we use as a main entrance to the house, so it's likely the shelves will be used to hold day-to-day things like our keys, wallet, kindles, purse, etc. I'm not too worried about the shelves getting small dents and scratches, though i do wonder the main platform will end up getting dirty over the years. Poly would help with being able to wipe off grime, but i'm concerned about it chipping/flaking over the years and needing refinished. Would something like shellac be a better alternative? Maybe …
-
-
- 3 replies
- 3k views
-
-
Had gathered some salvaged wood from an old dinning room table to build a chair for #2 grand daughter. Just a quick project wasn't going for a pristine chair. After cutting, sanding and assembly I applied Dark Walnut stain to match the refurbished roll top desk I finished for her. I let the satin sit for a while and wiped off to reveal a spotty finish. like this. Does anyone have a probable cause, to avoid this in the future. At this point the Grand Daughter can choose to keep the spots and call the chair, Cheetah or it gets painted.
-
-
- 3 replies
- 2.9k views
-
-
Hi Everyone New to wood working and thus this is my first time using Arm R Seal. I have had a hard time getting it to go on evenly (I had a much easier time with Watco brush on lacquer which I used on the last project). Part of this issue might be the Wisconsin weather, so after feed back to my previous thread I'm going go to this it a little (10 %) and bring it inside to dry after applying it in the garage. I've attached a photo of the defects I'm getting are these brush strokes or something else?
-
-
- 34 replies
- 9.6k views
-
-
I'm making several wooden flags for a local store to sell. I'm making them all with pine stripes and oak as the union. They wanted 5 and the one I showed them was as shown in the picture, burned pine for the red stripes, lightly toasted pine for the white stripes, and oak that was lightly burned for the union with the stars. They liked how that looks but they want one to be full color like the flag, but they want it stained, not painted. They want to be able to see the grain in the wood. Now, I have red oak stain for the red stripes. I've seen white stain at Home Depot before. Now for the blue, I can't find a penetrating stain that will compliment the wood grain and still…
-
-
- 16 replies
- 6.4k views
-
-
For years I have tried to make wood perfect, removing all blemishes, nail holes, planer gouges, etc....and now I want to create this stuff. I found a table top that shows exactly what I want to do. Can anyone tell me how I might go about it? Not sure if you can tell, but there is a distinct pattern on each board. Would it have to be done board by board in advance of assembly(glue-up). A. How would I add the gouging and rough marks? B. Would I paint first, then scrape/sand to get the desired pattern, then stain it/wax it? Thanks, see picture attached!!!
-
-
- 9 replies
- 2.9k views
-
-
I am going to be working on my table-top later today and I need some wood filler that will sand and finish along with the wood. Can someone recommend a good brand that I might be able to actually find around here? There are some small pin-knots that I need to fill, and some larger ones on the back side. The wood is QSWO and I will be staining it somewhat dark (Onandoga for those familiar with Stickley). I was planning on taping around the spot to be filled to prevent "smear" and then sanding it back. Any other things to worry about?
-
-
- 10 replies
- 3k views
-
-
I have a once beautiful mahogany island in my kitchen, which I had originally finished with 100% Tung oil about 10 years ago. At that time I didn’t thin it and used fine steel wool between coats… just a gorgeous, silky, rich result. That was then. Now I have something disastrous going on. Over time the finish was becoming a little gummier and showed some signs of wear in sporadic areas. Occasionally pledge or lemon oil was used on it to eleviate a minor rub area, which may have caused the softening. My daughter made soft pretzels one day and left drips of the baking soda and water solution on the counter top over night. When I came down in the…
-
Smell that? You smell that? Tung oil, son. Nothing else in the world smells like that... I love the smell of Tung oil in the morning... The smell, you know that Tung oil smell, the whole shop.... Smelled like... Victory. Someday this finish’s gonna dry...
-
- 3 replies
- 3.1k views
-
-
I like to play around every now and then. This time around I'm playing with finishes on some test boxes that I made. Specifically, brush applied finishes instead of my usual wipe-on or sprayed. I'm having a bit of a problem with Shellac. I've got the build-up that I want, but when I started my final sanding at 400grit, I was left with a white residue that doesn't seem to want to come off. How do I get rid of the residue? Adam
-
-
- 19 replies
- 12.1k views
-
-
i am working on a live edge slab for the wife. Going to be a new TV stand. she wants high gloss poly, I want epoxy resin lol. So sealing the walnut with shellac before poly was the way I am thinking of going. But have read tons about shellac discoloring under poly. Is this true? what would be the way you guys finish it to get a high gloss look? Only will have a flat screen tv and PS3 on it.
-
-
- 27 replies
- 8.2k views
-
-
For my first woodworking project, I wanted to build something for the house. I chose a 1/2 size hamper inspired by Marc's. Given that I'm just getting started, I chose poplar as it's cheap, and I expected to make several mistakes before it was over with. Now that it's assembled, I'm stuck on how to finish it. I realize poplar isn't great for staining, but painting this after all the work I've done feels like a bit of a letdown. Any suggestions? Thanks!
-
-
- 15 replies
- 3.1k views
-
-
For the cutting board crowd, I have always used GF salad bowl finish but recently decided to give straight up mineral oil a go. 3 coats in and I feel like it is still absorbing a lot of oil. Where was the tipping point that you feel it is properly sealed? After 3 coats of GF, I felt like it was solid and creating a film on top.
-
-
- 29 replies
- 8.9k views
-
-
I have seen online that many people fill small voids in furniture with five minute epoxy. I have a small void on the bottom of a cutting board that I just made. The void is in one of the walnut strips. I have seen people in videos use a 5 minute epoxy to fill these voids. My question is what epoxy should I be using. Because it is on a cutting board that will get wet I was leaning to a marine epoxy. Does anyone have any advise? The void does not go all the way through the board and I am not worried about adding due to color match the wood. Any thoughts? Sent from my iPhone using Tapatalk
-
-
- 10 replies
- 3.8k views
-
-
So my friend opened up a gym in our hometown, and asked if I'd make two benches, one for each bathroom. Haven't made a bench before but I'm up for the challenge. Watched Marc's outdoor bench build, really like the look and design of it, thought about using it but don't want to steal the design I guess so will hopefully make my own somewhat the best I can. His finish for his was marina epoxy and a marine finish which I've never done before and seemed expensive from looking at the prices online. These benches will be inside but I'd say sweaty rear-ends will be sitting on them, so have to protect against that. Are there any finishes out there you all would suggest?
-
- 2 replies
- 2.9k views
-
-
Hello all. I am in the process of stripping an old dresser. I believe the dresser to be two types of wood. A lighter wood that makes up the body of the dresser and then very thick veneer facing on the drawers, top and sides of the dresser. The dresser is from Paine furniture based on a metal stamp, so I think it is early 1900's. I took off the paint expecting to find damage but the wood looks in good shape so I would like to stain it rather than reprinting. I used a heat gun, one round of citristrip, although there is still some paint in the grain, which you can see in the picture. I think based on the grain and reddish hue that the veneer is mahogany? I am not sur…
-
- 3 replies
- 2.7k views
-
-
Hi Everyone I'm hoping for some advice from some fellow northerners on the most user friendly finish methods for cold climates. I live in Wisconsin so it's usually 50 or below for half the year. My shop is in my garage and has a large heater, but I'm worried about blowing dust if I leave it on during finishing. I've been using arm r seal on my current project (after warming the garage to about 60 degrees) but it takes a long time to finish drying in this weather. I don't mind waiting it out but the long dry time allows it to pick up a lot of floating dust. It seems like lacquer is the best bet for curing time, but you can't spray it in the cold weather and if I c…
-
-
- 36 replies
- 17.6k views
-
-
i made a picture frame and base out of walnut and curly maple. Applied 1st coat of arm r seal yesterday about 5 30pm. Its almost seven the next morning. The thing is still sticky. Ive used arm r seal a bunch of times and its usually dry and ready for 2nd coat way before now. My shop stayed over 60 last night and im not sure what is going on. any suggestions? thanks in advance
-
-
- 12 replies
- 8.6k views
-
-
I just finished a Walnut topped Kitchenette for my daughter and delivered it yesterday. She had been bugging me since I finished it and I gave in and brought it over a little bit sooner I guess than I should have. She placed a glass of cold water on the top for about 30 seconds and it left a very slight ring which you can see if you look at it from the side. I'm pretty bothered because I thought my finish would have repelled that but I'm not sure if it's my finish choice or maybe didn't cure long enough so I'm looking for some advice please. I used the 3 part-BLO/Spar Varnish/Turpentine blend mixed in even amounts. Applied 5 coats waiting 24 hours between coats. Last…
-
- 2 replies
- 2.9k views
-
-
I will be finishing a QSWO top with the Faux Stickley/Jeff Jewitt method. I want to make sure the natural wood's figure, grain, etc comes through. I was also thinking of using a wood grain filler. Is this a bad idea? Or does that stuff only seal the pores?
-
-
- 12 replies
- 3.9k views
-
-
I'm making cold frames for a friend's vegetable garden. The top of the cold frame has a hinge at the back, and can be propped open. Sort of like this The idea is that the lid can be propped at varying heights. You control the temperature by adjusting the opening. Everything from wide open for working on the plants, to just a crack for a little ventilation.. Because I over-think everything, I'm putting short dowel pins on the sides of the lid and the case, and providing a slat with dowel holes along it's length. That way the lid can be propped up at different heights. I drilled 3/8" holes through a 2x4 and then ripped it into four 3/4" strips (two cold frames with slat…
-
-
- 5 replies
- 3.5k views
-
-
Hello, i'm an amateur woodworker living in Colorado and for Christmas this year i decided to make a cutting board for my brother in-law (to his specifications, which are not like your usual cutting board). For the material i used Hard Maple and for glue-ups Titebond III. The board, which is my first cutting board ever, came out pretty well, albeit with a slight warp, but nothing major. My issue is with the finish. In my infinite wisdom, i applied General Finishes Salad Bowl Finish at full strength, making a film. I now realize that this is absolutely not recommended for a cutting board and i certainly wouldn't want to give a potentially unsafe cutting board to my brother…
-
-
- 8 replies
- 3.3k views
-
-
Hey guys, I ordered Marc's "Simple Varnish Finish" DVD and was planning to adopt his recipe of 1/3 mineral spirits, 1/3 poly, and 1/3 boiled linseed oil for the varnish on a display case I have made with some really nicely figured curly maple. But, I watched another video of his that suggested I should use a dye to better pop the grain. Then, I watched his picture frame video and he doesn't use a dye on what appears to me to be some curly maple as well. Which approach do you guys think will give the best finish?
-
- 2 replies
- 2.7k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·