Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by Merlau,

    ok here is my problem, its to red after top coat is on. solvent based lacquer, precat.. the rest of the project is ok but the tops are to red or orange. can get away with what i have but would like to brown up the tops if i could. i thought of toning a top coat with some green behlens to brownup the color some.. any ideas of what i can do would be appreciated,,

      • Like
    • 6 replies
    • 3k views
  2. Started by wjffineww,

    I am wondering what color grain/pore filler I should get for mahogany. Should I get some kind of brown or just get neutral/natural? I will be applying clear finish over this, no dye or stain. Also I have several pieces to do, and some of the mahogany is kind of light salmon color, other pieces are darker, and I'd just like to purchase one quart if possible Thank you.

    • 19 replies
    • 11.3k views
  3. Started by hd03king,

    I'm making my second set of the WFC kids table and chairs and I used baltic birch plywood. The first set I painted but i really like the look of the baltic birch so this time I was planning on just putting several coats of poly on it. Should I put a coat of dewaxed shellac on first and then the poly or can i just start putting the poly on? thanks Dave

      • Like
    • 1 reply
    • 3.6k views
  4. Started by Blazej,

    I decided to build the Woodworkers fighting cancer project from 2015, the table and chairs set. I can buy birch plywood where I live, but it costs so much, you would think it's made of solid gold (well, almost, and also, I'm cheap). So I decided to make the whole thing out of reclaimed pine boards, about 7/8" x 8 1/2", various lengths. From what I deduced they used to be in ome sort of archive for many years, so they are plenty dry. When I milled the pieces I saw that there are sap pockets in multiple places, to the degree where the wood is sticky. When I cut it on the table saw there was a lot of sticky fine dust. Here comes my question - will I be able to fi…

    • 1 reply
    • 2.9k views
  5. Hi! Need some help in advising a family member on the best approach to refinish the partition in their office. It's basically a semi circle with glass inserted in the middle. Short story is the veneer was peeling and they decided to peel and scrap it off... I know that glueing and refinishing the veneer would have been ideal, but it was already ripped up once I got there... They don't want to bother re-veneering, so is painting the only option? Any ideas?

  6. Started by Gayle,

    Hi! Just joined the forum. Been getting into a lot of furniture refinishing lately, but I just bought a 10' live slab maple for a countertop, and I want to make sure I put the right product on it. I've read maple will eventually turn yellowish? with certain products? Definetly do not want this!! I have a beachy theme going on, so want to keep it light. I've seen milk? finishes? Would love to keep it natural, like it looks now, any ideas? Wish I knew how to insert a pic because it is BEAUTIFUL!! Any suggestions would be greatly appreciated, thank you in advance!

      • Like
    • 5 replies
    • 2.8k views
  7. Started by bobwax,

    I am pumped. I just got my first live edge board. My wife of course expextes it to be finished in the morning. I am a little more conservative. My dilema is my history. As a 20 something I worked for a local paint company. 40 years ago we told people that shellac was passe and lacquer was unavailable. Thant among other myths has stayed with me, but everything I read nd see today say that was BS. I want the slab to stay as beautiful as it is. I'm thinking that I want to use either clear or amber shellac as a base coat, and finish it with either satin lacquer or Arm-R-Seal. I would like to get a consensus from you guys .Anyone want to chip in? Thanks

      • Like
    • 17 replies
    • 4.6k views
  8. Started by MooseMan33,

    I am installing bamboo on some steps. it is a dark rich stain. The hand rail that my wife selected comes in the following wood types(African Mahogany, Beech, Brazilian Cherry, Cherry, Hard Maple, Hickory, Poplar, Red Oak, Walnut, White Oak). My question: which one of these wood types is my best bet for "matching" the look and color of the bamboo flooring. Appreciate any advice ...Thanks

    • 2 replies
    • 4.6k views
  9. Started by Fsupainter,

    So I used a water base conditioner and topped it with a oil based stain. I am using min wax products. The color I am doing is black. What kind of problems will I have. And help would be great as I am building a dinner table.

  10. Is there a good way to protect inlays when applying a tinted wood filler (The project is made of Mahogany)?

      • Like
    • 1 reply
    • 2.8k views
  11. Started by Hammer5573,

    I've never used a wood dye before. I've done a lot of reading about it and understand that streaking can be a problem if it's not applied properly, especially if the incorrect type of applicator is chosen. I've also seen a number of recommendations regarding what type of applicator to use (industrial paper towels, cloths etc). Does anyone have any suggestions about which type of applicator is best to prevent streaking or is streaking caused by something else.

    • 9 replies
    • 3.5k views
  12. Started by jaypat58,

    i saw some curly red oak the other day and thought i wanted to make a table out of it. before i did into a project i want to get some advice on how best to finish the wood to get the feature to really pop. just a small shaker style table but it thought it would look nice in this wood. any advice would be appreciated

    • 1 reply
    • 2.9k views
  13. Started by Ryan Bridges,

    Yesterday while I was doing some layered stain on some mirror frames I made I wasn't getting the effect I was hoping for. The stain wasn't as dark as I wanted. I was also angry that the general finishes gel stain seemed to be drying faster than I could apply it. I stumbled on wet buffing of the stain. That is to say I put on the first application, then as I was to wipe it off I kept the same cloth and just kept it slightly moist with stain. I buffed it as you would a french polish. The effect gave me both the darker finish I was hoping for yet came out smooth and not blotchy. I was wondering if others have tried this same technique?

  14. Started by Hammer5573,

    I'm considering building my next project using black walnut. Would it be of any benefit to use a grain filler on this type of wood?

    • 8 replies
    • 5.6k views
  15. Hey everyone- I have a question that I'm afraid I know the right answer to, but I just wanted to see if anyone had any tips or alternative ideas. A little background- myself and a worker just finished up a cabinet job on one of my family's rental units. The cabinets are 30-40 years old or older and have already been refinished a few times. We wound up sanding them down to bare wood, leaving what little of the veneers were left on the cabinet doors, and used a cherry gel stain to help blend all of the blotchy colors together. I wound up getting really busy with jobs elsewhere after the sanding process and my family decided to let the worker do the poly (he's done poly…

  16. Started by Dnorris1369,

    This is my first time using epifanes. I have applied three coats mixed 50/50 with mineral spirits. Its still kinda rough. Any suggestions?

  17. Started by Greenthumb77,

    My project is kitchen cabinets made of clear alder. Heres the story. i have completed the faceframe construction and use a 50/50 mix of bullseye no wax sealer and alcohol. I then stained one faceframe with Zar oil base stain. I am still getting blotches. I did more reseach and came across Charles Neil blotch control. This is a water based product. Can I sand off the oil base sealer i put on and the use this water based product? Will this work? Please adise My wife want the kitchen done LOL Thanks JIM

  18. Started by beantobe,

    We have two of these Tripp trap high chairs for our kids. It seems to be a veneered ply. Our 1 and 3 year olds absolutely scum these chairs up after every meal. It's amazing what parts of the chair they can reach with food on their hands while they are strapped in. Every few days you have to scrub the thing like you strapped in on the roof for a cross country road trip. I've tried Renaissance wax and it seems to work for a few weeks. My question is: is anyone willing to feed and clean my kids until they can do it themselves or is there a better way to make this pre finished chair more food stick resistant?

      • Like
    • 3 replies
    • 2.9k views
  19. Started by Aaron Pride,

    Hey everyone, I have a question about what finish to use on my project. I'm making myself a set of wooden tiles to use for a board game, about 1.5" x 1.5" x 0.75". I have 150 of them. I've sanded them down with 150grit sandpaper so they are smooth, and now I have to paint them on both sides using acrylic paint. In my head, I was hoping that after I applied the paint, I could use some glossy lacquer, giving the painted sides a really knockout shine and making the wood nice and smooth on the fingers. The problem is that I'm not very experienced with this sort of finishing, and on top of that the various definitions of what constitutes "acrylic paint" and "lacquer" are …

  20. Hi, I have two 52 x 28 x 1.25" maple table tops that I'm trying to re-finish for a work-desk. They have been in the house for ~1 month, but before then were stored in the garage (concrete floors) for about 13 years. There has been some cupping, but only enough to be noticeable standing a couple meters away. Story so far: Stripped the varnish and sanded down with random orbital using 80 then 120. Hand sanded down using 120 then 220. On the first piece: Used minwax preconditioner followed by minwax natural stain. There was significant blotching, so before ruining the second piece I am turning to the pros for help... I was going to try a 1l…

      • Like
    • 5 replies
    • 3k views
  21. I'm building a small cover for our door chimes and found a piece of oak with some great figure which I'm going to use for the panel. Cutting out the slices for the panels, they all have a few defects (small voids). I know I won't be able to remove them completely, but I'd be interested in hearing about any suggestions there may be out there. Thanks. Sent from my iPhone using Tapatalk

  22. Guest
    Started by Guest,

    I am making a dining table top out of 1/4 sawn white oak. I was hand planing the top and got some tear out. Any fillers I can use that would not be too obvious if I am going to finish with a gel stain? Brown. Thanks. Brian

    • 4 replies
    • 2.9k views
  23. Started by Merlau,

    for a Red OAK end table top, looking to fill the pores more than just a top coat would normally, not looking for piano finish but not hills and valleys either. thank you in advance for your input.

    • 6 replies
    • 2.8k views
  24. Started by Chestnut,

    So Menards ( a local store) is having a sale on wipe on poly where it's 8$ a quart. My question is does any one have experience how long it lasts when it's originally sealed? I was going to stock up on a few quarts beings that it's like $4 off or something.

  25. Started by Brendon_t,

    A) disgusting 2) like a yellow submarine D) all of the above. . Plus P P) why would you do that? D is clearly the most correct answer. In getting closer to the bench being a bench instead of a bunch of parts, I tried some Watco danish oil and a few others on some sanded scrap. Holy grosse batman. White Ash turns a nasty yellow. Any experience with finishes that don't turn the bench into a banana?

      • Like
    • 29 replies
    • 16.8k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.