Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by Tom King,

    Looks like interesting stuff. http://www.loghelp.com/p-1921-m-balm-liquid-wood-epoxy.aspx

    • 1 reply
    • 2.7k views
  2. Hello everyone! I am in the middle of making a jewelry cabinet for my girlfriend. It sports some highly figured lacewood and curly maple. I plan to pop the grain with some transtint and shellac. As far as finishing, I'm a bit concerned about finishing the lacewood. I want to go with some shellac because I want something durable. What have people done to finish lacewood? It's pretty porous. Thanks

    • 2 replies
    • 6.9k views
  3. Started by tim0625,

    Take a look at the photos of the butcher block counter. Stains and a couple scorched marks from what looks like hot pots. Remedy....I'm thinking sand with a orbital 220G and a light coat of what? Mineral Oil? Satin Poly? It's pretty natural now.

    • 6 replies
    • 3.1k views
  4. Started by Wildeyedfae,

    Help! I'm refinishing approximately 1200sq ft of 100 + year old long leaf pine flooring. One particular room had a grease spill/fire and allegedly the floor was burned and painted over. I started sanding it today and I've found no burn marks but about a 5' x 5' area of grease soaked boards. The rest of the floor is fine. The dilemma is what finish to use. I know anything poly (maybe sans oil based) won't ever adhere. What's my best bet? Would Waterlox work???

    • 14 replies
    • 3.2k views
  5. Started by ace_cobra,

    I have decided to go with a General Finishes water stain dye for my maple kitchen cabinets. Has anyone had success mixing colours to create a toffee colour, similar to Merillat. https://www.merillat.com/our-products/product-types/cabinetry/classic/spring-valley/maple/square/index.html#toffee I have been trying different combinations of light and medium brown, but they still are looking brown instead of a mocha colour. Suggestions?

      • Like
    • 9 replies
    • 4.2k views
  6. Started by Chuck Melton,

    Would it be sacrilege to spray deck stain through an HVLP system? Would an Earlex handle it? I am trying to justify picking one up, and if I can use it to maintain the 960sf of deck on the back of my house that would be a huge win. I like the idea if. It having the overspray from an airless sprayer (I've only ever used a cheap one, and wow did it suck) and I'd like to be able to finish with something other than a wiping varnish without driving myself crazy.

    • 2 replies
    • 2.7k views
  7. Started by Heavydc2,

    So I have this pretty cool cherry burl slab that I am just about ready to finish. My plan is to make a lazy Susan out of it. I am thinking tung oil in that it has poly in it. I am sure there is a million different suggestions, but I am new to this so any suggestions are helpful. Thanks

      • Like
    • 19 replies
    • 3.4k views
  8. Started by CJC5151,

    He guys I have a question for you....I'm doing finish samples for a client who I'm making a walnut dining table for...I'm normally a water based guy...I spray a high quality product from a company called aqua coat...but I really wanted to show depth in this piece so I used a product called watch teak oil...I used it because I have a buddy who uses it on walnut gun stocks and I loved the look...but it's a table so I wanted a top coat...After a week of drying I scuffed the sample with 320 and hit it with aqua coat table top clear coat...it looks spectacular. ..since then I've scuffed and hit it with 3 more coats...it looks so good, my question is what happens a year from no…

  9. Hi Everyone, I'm making 2 7'tall Oak Book Cases out of 2" x 2" sections and 3/4" shelving, see image for basic idea... The thing is... I need to use a Cerused/Limed effect without adding a stain first... I.e. Seal, sand, wire brush, liming wax, wipe, finish... Do any of you have any experience of doing this and if so, which Oak would you recommend? Any help would be appreciated. Kind Regards Mark.

    • 2 replies
    • 3.2k views
  10. Started by eJohn,

    So I started removing paint from a circa 1920's door. Door was originally an exposed exterior door. After removing several layers of older latex paints, I have come to a firmly adhered layer of something like black enamel or black varnish. It only smears when hit with a heat gun. Sanding causes severe gumming. NMP based stripper only caused smearing. It is embedded into the fibers of the door. I have not done the DNA test to see if it is shellac. Any info on old coatings? I do see some finishes like this on similar era homes in town. I wanted to get to bare wood and refinish, but now I'm thinking it may be more historically accurate to reblacken? Help! …

  11. Started by Pbmaster11,

    Two boxes. One oak and one Using sapele and have some gaps in my dovetails. Suggestion on a filler? And do I put on before or after finishing? Typing on cell phone. I apologize for any typing errors.

      • Like
    • 6 replies
    • 2.9k views
  12. Started by Nick2cd,

    I went to get a spray can of deft lacquer and the guy at lowes tells me they will no longer be carrying it. Now i cant find the stuff anywhere. This sucks! It was great for small projects

      • Like
    • 31 replies
    • 16.6k views
  13. Started by Mad Hungarian,

    Anyone know the difference between the 3x and 5x versions of the Norton Sanding Sponges? Is one any better than the other?

      • Like
    • 3 replies
    • 2.9k views
  14. HVLP newb, so my apologies if this is a dumb question... I recently purchased an Earlex spray station, and have been practicing with a WB poly on scraps of plywood. So far I've been pleased with the results on flat pieces of plywood, but eventually I would like to spray finish a desk that I've been building over the last few years. The desk is basically a mass of raised panels, and I'm curious if there's a method for getting an even finish. Should I spray the perimeter of the panel first and then the raised portion in the middle? Or does spraying straight across the set of panels as if it were just a flat board take care of all the surfaces (i.e.the sticking on th…

    • 2 replies
    • 2.9k views
  15. Started by Zack from Mass,

    Hello Everybody Total unknowledgeable newbie here, so please excuse my ignorance. I am building a 13' wide closet, framed by "fake beams" wrapped 1" in rough sawn shiplap. I am going to make 4 doors and hang them using "barn door bypass hardware" from rusticahardware.com How do I finish the rough sawn? We are thinking we want to keep them pretty natural looking. But, we might not... Shellac? Shellac and Poly? Sealcoat and poly? Stain, sealcoat, poly? So many options. Can someone point a lost man in the right direction? Picture attached. Thanks

  16. Because of the cold weather here, I still cannot spray finish in my garage or driveway. I have had a project on hold for a while, and decided to brush on the finish today instead of waiting any longer. I think I am good at brushing on finish, but I really prefer to spray and I have the equipment to do so. My issue in a location. I want to build or set up some type of spray area in basement. I have the space, and am willing to frame out a dedicated room if that's what it takes. Has anyone done this before? What did you use for ventilation or overspray removal? The only windows are the typical basement windows, and measure about 36 wide and 24 high. I have poste…

      • Like
    • 63 replies
    • 26.2k views
  17. Started by trz,

    All you who use wipe on polices, what are you use as your vehicle, rag, old nylons or???

      • Like
    • 30 replies
    • 7.8k views
  18. Started by Sac,

    Having some issues when finishing a shelf that is made with red oak ply. The problem is, that the grain is not filling. If I flood the surface, wipe off excess, it still leaves the grain full of little spots that aren't getting colored. I also tried spraying it to see if it would make a difference, still the same problem. Need to get this thing finished, and just looking for a solution. Any help would be appreciated. Thanks. Sac

    • 6 replies
    • 3k views
  19. Started by rodger.,

    What is the equivalent grit? Is it approximately 1200? Want to use it for rubbing out a water based poly with some soapy water.

      • Like
    • 1 reply
    • 2.9k views
  20. Started by KristyR,

    Sorry to keep bothering you guys but your knowledge has been priceless to me so far. Per your instructions, I got the perfect glaze and with a little time and patience, replicated it perfectly. Now the hardest step for me so far- the finishing! The table is gorgeous but it doesn't need any more amber so I feel I need to steer clear of Linseed oil? I used one coat of water based stain just to give it a little umph which limits me to what I can finish with. These pics are the original finish and I would like to replicate as closely as possible. Any suggestions? Water based poly? Matte? Semi-gloss? Just a side note, husband says there is no way this table is authe…

    • 1 reply
    • 2.9k views
  21. Started by KristyR,

    Hi! I'm finishing a french provincial table that had some well placed and quite classy black trim. Can you tell me if this is paint of stain? If paint, what type of paint should I use to replicate? Thanks much!

    • 3 replies
    • 3.2k views
  22. Started by trz,

    I've got a TV stand that I made out of oak and oak plywood, in one area I used some 18g brads (wish I wouldn't have used them now), I filled the holes with minwax filler and stained with minwax golden oak stain. Needless to say the nail holes stick out like a sore thumb. I think if I could somehow at least add some grain lines itmight help. Does anyone know how to do this with good results?

      • Like
    • 14 replies
    • 3.4k views
  23. Started by duckkisser,

    old wood turns gray and cracks im going to use some vineger to turn my wood grey but i was wondering if there was a chemical that i could use that would allow me to make the wood crack. im making a mask and i want to be able to make the face part of the mask look like old wood. any ideas?

      • Like
    • 18 replies
    • 11.1k views
  24. Greetings all. I'm somewhat experienced in small projects and traditional types of finishes and such, but am new to using powdered dyes and lacquer. Right now I'm experimenting on a scrap piece of spruce just to see how things behave, and even now putting on the third coat of lacquer, the rag I'm wiping it on with is still picking up some of the color. I don't see any difference on the work, so I'm more curious than concerned about it. So here's what I've done: I've found a line of powdered dye here in Japan where I'm living now that dissolves in denatured alcohol, and I'm quite pleased with this as it greatly reduces drying time for the color. I've used a clean …

  25. Started by karfree,

    I recently placed a memorial bench in Central California on a ocean bluff. I quickly realized it needed to be protected from the elements. I guess I thought for that kind of money it would be sealed and protected. Frustrated. So I have researched and am thinking spar varnish would be best. It will be tricky to apply several coats because it is in a public area but I am willing to do whatever to preserve the bench for as long as possible. So does anyone have suggestions for this project. These are the specs provided about the wood used- Thanks for any help or insight. [. 2140 slats shall be free-of-heart-center, kiln dried C and better Douglas fir. There shall be no loos…

      • Like
    • 4 replies
    • 2.7k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.