Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by Slmize,

    Can anyone direct me to an artical or web site on finishing wood with an epoxy finish. I am making a tackle box and would like to put a waterproof epoxy finish on it. Any direction would be appreciated. Thank you.

      • Like
    • 11 replies
    • 3.5k views
  2. Started by David Turner,

    Here is the $1000 question..... OK not really more like $4.00 question cause thats about all it cost to build this Pencil Holder... But I am having an issue deciding how to finish this, It is pine and i know without a pre stain, it will end up blotchy (done that before) ...... What would you guys suggest, it still needs to be sanded and I know its a simple project but I'm not pro and probably the least experienced in the entire forum.... I thought about a black paint, also a rustic type of look (probably cant do that with pine, But not sure maybe it is?) Thought and Suggestions????? Thanks

      • Like
    • 11 replies
    • 3k views
  3. Started by grebtso,

    I have a young family and am making a growth chart out of a walnut slab where we will mark the kids' heights periodically. My plan is to take off much of the bark, burn in ruler marks and then finish it. But I am struggling with how to finish it in order to accomplish: 1) Making the beautiful slab look its best 2) Protect it 3) But also allow for height markings for the kids to not wipe off If I didn't need to worry about making marks after the finish is complete I would probably just do Shellac plus a semi-gloss poly. Thoughts? Also thinking about how to secure to the wall - my thought was to rout out a section in the back and create a french c…

  4. My home is a Cape Cod that was built in the 1950s and has a lovely formal fireplace that mimcs the fluted column-type trim of the exterior of the house. Recently (well, 2 years ago) while I was repainting the living room I had an epiphany and decided to strip off the layers of white paint on the mantel. It was fun. I scraped. I used a heatgun. I used a chemical stripper. The most challenging part is the lovely detailed carving on the face of the front board. Except that it isn't a carving at all. It is some type of plastic or resin glued on. The paint is too stubborn to come completely off of it and the "carving" is coming away from the wood and will need to be r…

    • 14 replies
    • 13.4k views
  5. Started by Llama,

    Hey, wondering about this stuff! How much better is it than Briwax? The reviews I've been reading say its great for copper and knives, but I'd like more wood related feedback. My plan is to use this as a topcoat over another finish, perhaps Briwax or varnish? Any help would be appreciated!

      • Like
    • 4 replies
    • 5.9k views
  6. Started by Eric.,

    I need to do a bunch of research, but I'd like to get a general consensus (or a trainwreck argument ) from people I trust before I start. In another thread I explained that a friend of mine gave me a decent HVLP gun he had. But my compressor is probably inadequate. So my options are buying a bigger compressor for the gun I have, or buy a LVLP gun, or buy a turbine. What I'd like to know is what the pros and cons are of each. I have to assume there's some disadvantage to the LVLP since a lot of guys have compressors good enough to run them, yet it seems most people go with a turbine...a nice Fuji being twice the cost of a high-end LVLP. Why is that if LVLP can…

  7. Hey guys Dealing with two women ... wife and mother in law. I am just loving walnut and both women love red. My preference for a natural finish is because of ease of maintenance. I am thinking about applying a natural finish on walnut and then glaze it with red. If there is damage, I will correct the finish over time with natural stains. Once finished with the glaze, I will then shoot lacquer or some kind of protective coat over ... What say you?

  8. Started by lildesertwoodshop,

    I have a slab ish style small table top, I used Danish oil for the first time and am super happy with the results. My Questions are do I let it dry and call it a day , and if so would a client have to re apply and if so how often? Or do I seal it with some past wax? I was trying to avoid traditional sealing methods for time constraint reasons. Thanx All

  9. Started by lildesertwoodshop,

    So I have a few tables I built and finished the tops with Epoxy and Arm R Seal Satin. The came out great and smooth as glass. My problem is there seems to be a few SPECS of dust on them. Is there a process to sort these out ? Thanx

  10. Started by pghmyn,

    So, my favorite finish is shellac. There is no getting around that. What would happen if I thinned the shellac down just a little bit? Would this make it easier or harder to apply? Also, when applying shellac, what is the easier applying method? Right now I am using just a cloth, but I am open to any other suggestions.

  11. Started by bobcrosley,

    At the direction of the design committee (the Mrs.) my sons and I are working on a couple small-to-medium projects for Christmas presents. For 2 of them, she wants us to customize them in a specific way. She wants them stained, then have my oldest do some stenciled painting on them, then poly over to protect them. Assuming worst case scenario, I'd be using readily available, home center finishing materials. That means oil-based stain, followed by water-based paint, followed by oil-based poly. My general finishing philosophy so far has been "keep it simple as possible so you don't screw it up." I have no idea if mixing bases like this is good because putting on the ne…

  12. Started by darla,

    I am using some old Douglas Fir to build a new kitchen island. I do not was to stain it, oil it or otherwise do anything to inhibit the natural antimicrobial properties of the wood. Is there a dye or water base product that would meet my needs?

      • Like
    • 7 replies
    • 6.7k views
  13. Started by rlatrelleg,

    I'm using an oil/poly finish on a box. I want to embellish it a bit more, and I was wondering what kind of glue can I use to bond metal to the oil/poly? Should I just sand the area, it is a complex shape so not should it will come out right...

    • 2 replies
    • 2.9k views
  14. Started by Tpt life,

    What old finish smells like pine pitch?

    • 5 replies
    • 2.8k views
  15. Started by ngabriel,

    I was half-way though finishing my WW guild blanket-chest when the Texas weather decided to go against me and drop nearly 40F overnight. It's now about 38F and I'm wondering if it's not too cold for outdoor spraying? I'm spraying General Finishes Enduro-Var via HVLP. I know colder weather extends dry/cure time, but will it have another side-effects? Or should I just wait for it to warm up a bit? Thanks

      • Like
    • 10 replies
    • 5.3k views
  16. Started by cmchobby,

    I purchased an unfinished oak table. The reclaimed timber in this table is very old. I absolutely love the rustic look, however there is no protection on it. (In fact, I had looked at this table for the past 2 years, but was afraid of the unfinished look - I decided to go for it ) I am not into wine stains, crayon marks, et. I want some sort of protection while keeping the look of the table. I have dabbled in refinishing some furniture so I know my limitations as far as the look of this table goes. I have thought about using wax, or danish oil, or plain sanding sealer. Each of these have pros and cons and will change the color of the table. I like general finishes…

    • 3 replies
    • 7.4k views
  17. Started by jmack77,

    I am making my wife's uncle an oak dresser, and he is wanting it to have the "OCS 101 S2" stain. Does anyone know where I can find some? I've already tried looking online with no luck. I did find a recipe over on Sawmill Creek, that uses several Minwax stains. Does anyone have any experience with this? Thanks!!

    • 3 replies
    • 6.6k views
  18. Started by ChetlovesMer,

    Okay, I'm building a farm house style table. The wood has a few knot holes, which look great I'd like to keep them. Should I fill them with epoxy? Latex? Or just poly right over the top of them? Anyone had good luck with one method or another?

  19. Started by JustinScottDeVico,

    So I'm using shellac for a base coat. What should I use for the rest of the bench. I'd like to use one type for the whole thing. The top will take abuse,of course. Should I just stick with the shellac and call it a day? I'm a bit confused as to what to use....way too much info out there it gets a bit overwhelming. Thanks again.

    • 5 replies
    • 2.8k views
  20. Started by lexugax,

    Hello. So I have been trying to finish this walnut table for weeks now and I am very frustrated. I have been using minwax OIL based poly. I apply a coat with a brush, sand lightly with 220 as instructions say, then apply a second coat. Well, after the second coat dries, I CAN STILL SEE THE SCRATCH MARKS from the sanding of the first coat! How is this possible? By the third coat I would have a horrible mess that I won't be able to rub off. I have applied water based poly on cherry with very good results with a pre-coat of amber shellac. I know that water based poly gives walnut a whitish/bluish hue, but is there any way that I can use water poly and not get that look? …

    • 9 replies
    • 9.3k views
  21. Started by JustinScottDeVico,

    So I put amber shellac on my ash and walnut table. In my test piece it wasn't nearly as yellow as it is now. I wanted to use the amber because it darkened the grain better than the blond. Is there anyway to tone down the yellow before I add the next finish. Also other than the top should I add general finished varnish?

  22. Started by mab54,

    I am going to use 3 coats of either polycrylic or polyurethane over dewaxed shellac. I will end up with a semi gloss look. I have been told that the best outcome I can get is if I use Gloss on the first two coats then use the semi-gloss on the final coat. I was told it will give me the cleanest or clearest look when I am dione. I asked someone at minwax his opinion and he agreed, I asked someone at Zinsser (they make Rust-oleum polyurethane's) and he disagreed with this. Does anyone out there have an opinion? Does anyone do this when they want to end with a semi-gloss or satin sheen? Please let me know what you think. Thanks Marty

      • Like
    • 3 replies
    • 2.8k views
  23. Started by PerezM,

    Building a replica of our 107 year old cross at my church. The old one will go inside and the new one will replace the old one on an exterior, south facing wall. The new one will be, old reclaimed douglas fir. What is the absolute best clear finishing for this? I am in California and the VOC thing is making it hard to find anything decent. Thank you, Mike

  24. Started by Jakeobean,

    Just received my new book, "Finishing, Simply Put....No Chemistry Degree Required" written by Charles Neil. I'm very impressed by the quality and content of the book. It contains many photographs and wonderful information and tips on creating a beautiful finish. It address the schedule for finishing, methods to correct problems, and most importantly a clear and precise description on creating a great finish.

      • Like
    • 2 replies
    • 2.9k views
  25. Started by blobula,

    Hello, I'm new to woodworking and had a question about the best steps I can follow to finish a pine table for outdoor use. I know now after reading different forums that Pine was a very poor wood choice for outdoor use, however, I'm now a little smarter for future projects. Having said that I built a picnic table and chair that will go on my deck and was wondering what the best way to finish and seal it would be? Is there a way to stain and seal it keeping the grain of the wood visible, or is is best to just prime and paint it? I live in an environment that sees all 4 seasons consistently. What products would you suggest for either of those two options? …

      • Like
    • 14 replies
    • 209.8k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.