Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by Erad,

    Back story: I've been refinishing my bass guitar. I bought it used and the previous owner refinished it himself, and did a subpar job. The finish was tacky, and wrinkled. It would stick to my arm and pants when I would play the bass sitting down. So I decided to do my first ever refinish. I stripped the old finish off, realized that he had stained the Basswood a darker color. After many hours of sanding, and a bit of bleaching as well, I got it back to original basswood color. I then used Tasnfast water-soluble dyes to dye it a green/black burst. Now I'm done with all that, I'm starting to put the Deft Nitro finish on it. I did 2 light coats and then a 3rd heavy coa…

    • 52 replies
    • 22.5k views
  2. Started by chrisrand,

    I'm a relative novice at woodworking. Most of my experience is in turning, but I'm trying to branch out and am building my first piece of furniture. I stumbled across some beautiful curly walnut. I've just completed my glue-up, and will be cutting it into a round, 40" table top. I've spent the past few days reading about finishing walnut, and have succeeded in getting even more confused as to how to approach the job. I want a very glossy finish that shows what I hope will be a lot of chatoyance in the wood. I've read that it's unnecessary to use dyes on walnut as you would on maple. Is this true? I think, from what I've read, a coat of BLO, followed by a coa…

      • Like
    • 29 replies
    • 8.6k views
  3. Started by Jasahan,

    Found this interesting. He details "aging" cherry, mahogany, and oak with two different chemicals, and does it semi scientifically. http://www.emgw.org/papers/ChemicalStains.pdf Anyone try any chemical staining? I'm doing some pieces with iron buff/iron acetate, and I'm curious to know what other weird finishes you can get chemically.

    • 2 replies
    • 2.9k views
  4. Started by estesbubba,

    I use Zinsser SealCoat somewhere along the line on most of my projects. Getting into spraying waterborne topcoats now I still want to use it but also don't want to cause problems. Is a 2# cut too thick to spray and will run, or will it cause problems under waterborne topcoats? Is a 1# cut good enough for sealing, barrier coat, and to magnify the grain on darker woods? I plan on using a 1.0mm set with my Fuji MM4 and want to do some practice spraying of shellac this weekend.

    • 5 replies
    • 4.1k views
  5. Started by wtnhighlander,

    Anyone have a favorite technique for blending walnut sapwood to look more like the heartwood? I know a lot of us like the color contrast, but my 'client' prefers a more even tone....

  6. I am building a farmhouse table from pine 2x6 boards. I will be staining it with Minwax English Chestnut oil based stain and finishing it with oil based Minwax satin wipe on polyurothane. There is one slight crack between 2 of the boards. I kind of like the rustic look but my husband wants me to fill the crack. He says the crack will fill with crumbs. The crack is less that 1/32". My question is, what is the best way to fill this crack so it won't stick out like a sore thumb?

      • Like
    • 4 replies
    • 10k views
  7. Started by MarkhamPrice,

    Good evening all, this is the first question I have for you experts, and it probably will be the last. I am a hobbyist woodworker and so do not have easy access to some of the more specialized tools and supplies that you may recommend. About a week ago I turned a mug on my lathe and was wondering about what to finish it with as I intend it to be used for such as coffee, tea, hot chocolate and such. I am less than certain of the heat tolerance of what I have right now, a water borne poly, and do not have much else readily available. What do you more knowledgeable gentlemen, and gentlewomen if you're out there, recommend I use? And any special things I should know abou…

  8. Started by KustomKreation,

    I'm making a a pick guard for someones electric guitar, i'm using a 4mm birch ply veneered with 0.6mm flamed maple. The guy wants the finish to be a lime green burst, kind of what is in the picture below. I searched for ages trying to find a suitable colour wood dye without success, but my local craft store has a ton of fabric dyes, and it has exactly the colours i need. Has anyone tried using a fabric dye on a veneer? i wouldn't opt for this is it was thicker lumber but if anyone has any experience about using it on veneer i would love to hear.

      • Like
    • 9 replies
    • 7.5k views
  9. Started by Firehawk,

    I want to use an oil based wiping poly over BLO. My question is, how long do I need to let the BLO dry before I can apply the poly?

    • 1 reply
    • 3.2k views
  10. Hello. I know very little about wood finishes, and would be very thankful for some advice. I recently acquired a vintage drafting table. It was made by the Mayline Company in Mighigan in the 1950s. The top is planks of solid pine, and the base and legs are solid oak. It's a very solid and chunky table, and the wood is stunningly beautiful. I want to maintain the table top's original finish, even though it has darkened in an orange-ish hue. (I actually like it that way.) I believe that it has some type of hard finish, because I can see a dull light reflection off of it. However, the finish is clearly old to the point that the piece was able to absorb some mineral oil. …

    • 8 replies
    • 4.2k views
  11. Started by tpcolson,

    I'm going to be doing a LOT of finishing using General Finish WB, and my old wrists just can't run a brush for very long. I have a Dewalt 5 gal, 5.1 CFM compressor, and not really in the market for a bigger (more expensive) one. Any good recommendations for a gravity fed spray gun that will work "well" at 5 CFM? I'm "ok" with letting the compressor "catch up" every few minutes. I'm not shooting for museum quality furniture finish, just high quantity without obnoxious orange peeling. Thanks!

    • 6 replies
    • 2.8k views
  12. Hi All, Thanks for considering this question from a newbie. I'm refinishing the interior of a handsome 1902 building in Oakland California and want to leave its no-nonsense wood framing alone as much as possible. I'm working with a contractor who will lightly sandblast all the exposed wood surfaces: 12,000-15,000 square feet! Then we want to seal and perhaps darken the wood a little. I really don't want to paint. I'm wondering whether there's an oil finish we can use that doesn't require wiping. (Wiping that much square footage of medium-rough-sawn wood, including exposed rafters, sounds like way too much effort--if it's even possible.) Perhaps a few lightly s…

    • 10 replies
    • 3.1k views
  13. Started by Andrew Pritchard,

    I was going to make some trivets as Christmas presents out of some off cuts of oak, but I was wondering what kind of finish would best stand up to potential heat and hot water. I was thinking poly would go white and ruin them. Shellac strikes me as being a good choice - anyone got any experiences with this kind of thing?

  14. Started by JoshC1501,

    I have been building several Cornhole game boards which require a gloss surface. I am finishing them now. I am not a huge fan if high gloss more of a satin or oil/varnish blend kind of guy. But that is what the game calls for, and they do look great! Maple frame with some Figured maple mixed in, with 1/2" Baltic birch top. I am going to end up with 7-8 coats of wiping varnish on the top playing surface. So my question is after the last coat how should I proceed? I want the surface to remain high gloss and smooth it out as much as possible. Should I wait for it to cure for a couple weeks then use a brown paper grocery bag? Or should I do it as soon as it is dry…

    • 2 replies
    • 2.7k views
  15. Hi guys, I'm working on completing a Ron Palk style workbench (http://www.thisiscarpentry.com/2011/09/09/the-ultimate-work-bench/) and I have no idea what to finish it with. I am using A/C pine plywood and was hoping to put a light protective coat of something on it. I'm a rough beginner at this point and am looking to learn. Due to the overall size of the bench, I was also thinking that this project might be a compelling reason to buy an HVLP sprayer. However, I need a little educating on this topic as well. I've read Marc's review of the Earlex units and some of the suggestions regarding the Fuji's. I'm really hoping not to spend a fortune, but I would like a u…

    • 3 replies
    • 2.9k views
  16. Hi I hope someone can help me. I am currently refurbishing an oak parquet flooring. I put the first coat of fiddes hard wax oil oak lightning down last night which was fine. I have come to do the second coat, about 24 hours later and it isn't brushing on the same as the first. I have tried to put a thin coat on but the brush sort of sticks to the floor and leaves a white tacky mess. I have tried puting more on but that just leaves white marks and the floor very wet. Please does anyone have any tips? Thanks

    • 3 replies
    • 6.2k views
  17. Started by JoshC1501,

    I am finishing a pretty large project. Spent the better part of the afternoon appling a 1lb cut of Dewaxed Shellac(SealCoat). I am planning to use a wiping poly next. Just curious if there is any advantage in doing multiple coats of dewaxed shellac? I am just curious more than anything. Josh

    • 7 replies
    • 3.3k views
  18. Started by Bombarde16,

    Oak coffee table went into the vapors today. Where's the button that speeds up time?

    • 1 reply
    • 2.8k views
  19. Started by Jwest,

    Hello All, I was wondering if anyone has added transtint to shellac or a pre-cat lacquer to add color to your project that way. Here is my reason for asking. We moved into a new house a little while ago and a lot of the trim and doors look like the attached picture (more red-brown than the yellow-brown in the pic), but some rooms just have a cheap white trim and doors. I want to start replacing the cheap stuff with trim that matches the rest of the house. I would like to spray the unfinished trim in large batches to cut down on time. Also, the trim is hemlock which can be prone to blotching. I was thinking that I could spray a coat or two of clear, then a coat of …

    • 9 replies
    • 4.3k views
  20. Started by Ezzy,

    I am looking to finish some reclaimed wood table tops with a beautiful and thick coat such as the Rockler Two Part Epoxy Mirror Coat. However, for me, this is prohibitively expensive. Is there an alternative to this that is just as good and less expensive? Any advice would be great. Thanks. for reference http://www.rockler.com/product.cfm?page=21371&filter=bar%20top%20epoxy

    • 3 replies
    • 2.9k views
  21. Started by DaBear,

    I'm getting ready to finish a spalted maple bowl, and during the turning I used some thin CA glue to stabilize a few spots. Now these spots look 'wet' (no surprise). Once I hit it with the poly (General Finishes 'Salad bowl Finish'), should I expect these spots to blend in and disappear, or should I do some sort of extra treatment before putting on the poly? Thanks to all. David

  22. Started by Daniel McKithern,

    I'm making centerpieces for my wedding coming up next week and I'm kind of stumped on the finish. There will be teacup candles sitting on top of them with open flames, I was wondering if I need to buy a special kind of finish to not set the place on fire once i light the candles... This is my very 1st project so I am a beginner at all of this woodworking stuff. Enjoying it so far though. =)

    • 2 replies
    • 2.9k views
  23. Started by abowers,

    Hello folks, I had purchased Mark's video of his go to finish, and it has worked well until I started my tabletop (flat surface with a cherry veneer). I had used Minwax prestain conditioner (water based) and General Finishes water-based stain. It looked great until I tried the variation of grain filling. Once I started sanding (220 grit) with the 1/3 varnish, boiled linseed oil and mineral spirits in the direction of the wood grain and wiped across the grain, it has become very blotchy. Therefore my question is; how can I get an even stain after doing all of this. My thought was to let it dry for a couple of weeks, sand with 320 close to the wood, restain and the…

    • 15 replies
    • 3.8k views
  24. Started by Pwalter5110,

    In another post, I talked about a big mistake I made building doors for a wall hanging cabinet. Since then, I fix the doors which look really good, but I am having a little bit of trouble getting a nice finish that doesn's looked streaky. I am using Arm-R-Seal and am wondering if thinning would be a good idea? I looked at the back of the can and it says to not thin. It also says that you could use mineral spirits to clean up. I am assuming the can says not to thin only for EPA purposes. And if I do thin, do I use mineral spirits, and what mixture would work best?

    • 19 replies
    • 14.2k views
  25. Started by dfarmer,

    Whats the best clear topcoat for white cabinets. Sprayed 2 coats Shermin Williams Pro Classic base coats. General finish water based poly? Thanks!

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.