Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. So I've seen a couple of threads on here about commercial finishes, but nothing that completely answers what I need to know. So what would be a good finish for cafe tables, and a coffee bar top (no alcohol in the restaurant)? The bar won't be the actual work surface. It will just be the part where drinks and food are placed for customers to pick up (and customers will likely lean on it a lot). Everything will be made out of mixed hardwoods (recycled pallet wood; mostly oak, ash, maple, poplar, nothing exotic). I am leaning toward an oil-based stain, but the color-scheme person chose a water-based color. Is polyurethane a bad choice? I don't want to use epoxie…

      • Like
    • 21 replies
    • 7.7k views
  2. Started by JohnDi,

    Not sure if this belongs here or in off-topic but, Just bought a can of zinsners shellac for a project and decided to actually read the can for a change before I started. Noticed that they mention several uses I never knew. Wallboard, metal, golf clubs? Has anyone ever used shellac for any of these? Really curious as I just bought a used set of clubs and cleaned them up with a wire wheel and wondered if it would help protect?

      • Like
    • 8 replies
    • 3k views
  3. Started by BigAndRich,

    I have a piece of white oak I'm using on a landing that goes from a hallway to my living room. It's going to have a lot of traffic. Kids, dogs, rain, dirt, etc. So my question is what should I use to finish it. It has to be stained to match the hardwood that's in the hall and living room.

  4. Started by Brian Kukkula,

    Turning a martini glass and I don't know what to use for a finish

      • Like
    • 8 replies
    • 3.6k views
  5. I'm three projects into the my woodworking adventure, and I'm already frustrated with the pouring capabilities of the solvent tins and varnish cans. I was thinking about other applications where engineers have intervened to making pouring easier and began thinking about liquor bottles and those stainless steel spouts that bars often put into the openings of the bottle. So, Are glass liquor bottles reasonable vessels for short to medium-term storage of solvents and home-mixed oil-varnish blends? And assuming I'm using pourers with air tight caps, do you think the pourers would get gunked up by thicker ingredients like poly? Any other storage/pouring ide…

      • Like
    • 6 replies
    • 3.1k views
  6. Started by nod,

    The final finishing step to my walnut table project ended up being Renaissance Wax based on a suggestion from the hardwood supplier. He uses it personally, and finds it much more durable than a paste wax. I liked the sound of that, so I gave it a try. He said just 3 light coats, and buff in between. He uses a car buffer to save on the elbow grease. said a ROS was too fast. first round - 2 'thin' coats. then a third, thinking I was getting the hang of it. wrong. Obviously too thick. Hand buffing just highlighted the thicker and streaky spots which formed a nice sheen, but were so obvious flaws that it drove me nuts. A cheap buffer from Autozone didn't do squat. I foun…

    • 5 replies
    • 21k views
  7. I just posted a mini-rant in a reply to a fellow member asking about Formby's Tung Oil Finish, then ran across another thread where someone asked for help after finishing with Watco Danish Oil. Guys, read the material labels and the MSDS for these fancy finish products, you'll find they're mostly solvents. Just for an example(and I'm not just picking on Watco, I used a lot of their finish before I learned better), the Watco Danish Oil MSDS. Buy a pint from Highland and you're out $8.99, pretty typical price. Quarts are $12.99, gallons $35.99 Now look at whats in it according to the MSDS: First of all, there's 51-60% naptha. I bought a gallon of naptha the other da…

    • 2 replies
    • 2.8k views
  8. Started by wax,

    I recently stained a chair using watco danish oil stain and I did not not pre-seal it (newbee) and I got some blotchy spots. I did about 4 coats of the danish oil. Would it be ok to use a gel stain on top of the danish oil to make it darker + get rid of or make the blotchy spots less noticeable? If so do I use a pre-seal on top of the danish oil? Do I just go ahead and lay a gel stain on top of the danish oil? If I do apply a gel stain should I use a clear top coat or could I go without? I dont want to restrip the chair if I dont have to. As you can tell I am a beginner. I did some research but could not find answers to my questions. Thanks!!!

      • Like
    • 4 replies
    • 3k views
  9. Started by dwplants,

    I am looking to age a maple gunstock, it is curly / pillow maple. I have heard that one can use nitric acid, or a solution of vinegar and non-oiled 0000 steelwool left til it disolves, also heard if one wants it darker, use 5-6 tea bags in a cup of water. Has anyone used any of these or would you recomend something different?

      • Like
    • 13 replies
    • 17.7k views
  10. Started by kash,

    Hi everyone, I'm new on here so please be kind! I want to strip the Gibson Studio front and back in picture one and dye/oil it so it looks like the guitar in picture two, a nice deep oiled look. See Flicker link: http://www.flickr.com/photos/russ1914/sets/72157634263475338/ http://www.flickr.com/photos/russ1914/ My questions are: Once I have taken the nitrocellulose finish off with the appropriate solution/tinner and sanded it, it will be obviously very light in color and need dying before oiling with tung or tru oil. 1) Do I use a pre stain solution to avoid blotching? if so which one? 2) Do I apply a watered down first (lighter) coat of the …

    • 11 replies
    • 3.7k views
  11. Started by CJC5151,

    I recently got a job for 30 3x4 table tops in a restaurant/bar...what is the most durable finish out there for this.type of job...finish will have to holds up to cleaners, heat, and abuse daily...the wood will be different exotic slabs (wenge, paduk, yaya, chechen, iroku, celtis). Thanks

      • Like
    • 16 replies
    • 24.9k views
  12. Started by daviddoria,

    I've seen a few posts here about this and the TWW video about it. I've seen lots of recommendations for the West System epoxy, but I am concerned with the "amber hue" - I'd really rather it be clear. I read some places that 105 used with the 207 hardener will dry clear, but other places that it still isn't really all that clear. Can anyone confirm or deny this? Also, if the West System will dry clear, I don't see anything smaller than the gallon/quart sets? Is there another brand that I can get something much smaller? I know it will last for years, but I really will never need this much! Thanks, David

    • 13 replies
    • 19k views
  13. Started by PerezM,

    The old wooden cross at my church is over 100 years old. it is weather-beaten and needs a new coat of clear finish. It is south facing and takes a beating. What is the best protection to refinish it with? Brand names and types would be appreciated. Thank you, Mike

  14. Can I leave the finish in the sprayer between coats, 3 hours at most?

    • 11 replies
    • 3k views
  15. Started by ..Kev,

    New member to the forums so, apologies if I missed any rules or traditions. I am currently getting ready to finish a Cyprus shelf and corbels and would like some ideas on the finish. I have numerous items in my finish cabinet and an HVLP system but, have never put a finish on Cyprus. Thank you in advance for any and all advice!

      • Like
    • 9 replies
    • 4.1k views
  16. hey all, first time poster, but have been lurking for bit. I've found several old post on the subject (and watched a couple videos too), but have a few specific questions about my potential finish technique(s) and the products I've been testing. I realize many folks have their go-to product, but here's what I've got in the works so far. - Boiled linseed oil - several coats plus a howards wax and feed topcoat - Watco Danish oil 'natural' - Watco Danish oil 'dark walnut - pure Tung oil - several coats plus howards - Behlens rock hard urethane varnish 'satin' So far, the Watco Dark Walnut is out. Just too dark. Overall, I want to have a warm wood finish, to rea…

    • 20 replies
    • 7.9k views
  17. Started by Vetteman,

    Can someone tell me how they finish Walnut Burl veneer. What type of glue do you use? What is a sanding sealer and how to apply it and then how to finish it. I'm having such a hard time with Walnut Burl veneer. Marc, please do a video on Walnut Burl veneer. Thanks,

    • 7 replies
    • 11.7k views
  18. Started by marke08,

    Hey everyone, I'm new to the forum and woodworking in general. I recently completed two end tables for my living room made from reclaimed mushroom wood. I'm trying to find a good finish that doesn't darken the color of the wood. Basically I'm looking for a clear top coat that will protect the wood and keep the texture from splintering. Any suggestions would be appreciated. I have tried spray shellac, Howard feed n wax wigs polish and conditioner, and an oil based polyurethane. all darken the wood or give it a wet look.

  19. Started by gualy58,

    We bought a teak dining room at a very good price - chairs excellent condition - table not so much, it had some hairline scratches here and there - I decided to refinish - I am sanding by hand and taking the finish off - and now I am totally baffle as to what to do next once I finish sanding it - do i use a grain filler? if I use teak oil (Watco, Scan Care, Danish Oil) what do I use on top to make it smooth and glossy -- like the original finish? I used Scan Care oil just to see what happen and the color was right but it did not have a glossy smooth look ... So I took it off Any help or/and advice will be greatly appreciated it

      • Like
    • 10 replies
    • 7.2k views
  20. Started by Scott216,

    Mark has recommended ArmorSeal Wipe-on varnish a few times, but I can't find it anywhere online. Where can I buy this stuff?

    • 1 reply
    • 4.1k views
  21. Started by Mike Corwin,

    Hi guys - I made this coffee pourover stand for myself, and I was just asked by a local coffeehouse to make them a larger unit. I used the Maloof Oil/Varnish blend finish on mine, but wanted to know what finish you guys would recommend for this considering there will be a hot carafe of coffee sitting on the base. Is there anything that is particularly kind to a high-heat surface? I love oil/varnish finishes but just want to cover my arse since I'm making this for a business. Any advice appreciated!

    • 6 replies
    • 2.9k views
  22. Hi, Got an old cinema folding bench. The legs are made out of beech and the seats out of bent LVL's. The Finish was stainedand then Lacquered. I removed the finish from the legs and some from the seats.While working I saw that the less I deal with the LVL's the better, but still there are holes to fix and therfore snading to do and the more sanding I do, the more scraches and uneven surfaces apear. I'm not new to this, but I never had to restore LVL's before (only wood/veneer and so forth). I need to be able to stain it again and then lacquer it so,I'm asking your advice on how to get an even surface with the LVL's Thanks.

    • 7 replies
    • 2.9k views
  23. Started by Orbb,

    I recently bought a live edge slab of ash that I am going to turn into a side table for my office. I built two stand-up desks of ash earlier this year and am going to finish the live edge slab with the same finish - 1/3 BLO-1/3 Polyeurethane-1/3 mineral spirits, which I used as a wipe-on finish. My question is whether the bark should be covered the same as wood, or whether I should leave the bark natural. I generally experiment on these types of issues with scraps, but I don't have any live edge scraps. Any thoughts or suggestions?

      • Like
    • 4 replies
    • 18.5k views
  24. Hi all, I'm brand new to the forum so please be gentle. I really like mid-century furniture and was able to pick up a gem off Craigslist for $40. It's an old hope chest, and my wife and I are going to use the top surface as a changing table for our first child, due in a few months. The inside will get filled up with toys or other baby-related paraphernalia. Anyhow, it needs some refinishing work so I was hoping you all could give me some advice. Photos here (no spam): http://imgur.com/a/Sowiq#0 The top surface is pretty scrached, and there's one area where the top layer of wood has really worn away. The inside of the chest appears to be cedar-lined and is in g…

    • 7 replies
    • 3k views
  25. Started by pghmyn,

    I finished a picture frame. The inside groove perfectly fits an 8x10 picture. It's actually. 8 and 1/16 by 10 and 1/16 on the inside for any movement, although small. Looking for a finish. I have these three. Wipe on polyurethane. Clear shellac. Tung oil. I was thinking just shellac, because I have used it before and I am confident with it. Unless you can think of a good reason why I should refrain from that finish?

      • Like
    • 11 replies
    • 3.8k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.