Finishing
2,922 topics in this forum
-
Hi All Thinking about buying a festool ets150 but should i buy the /3 or /5? Can any one help a confused newbie with the pro's and con's, guess it will mostly be used for finishing furniture or is that a tooo general? Thanks
-
- 10 replies
- 3.4k views
-
-
Hello , I have a small traver trailer from 1974, it is paneled. I want to do some sort of finish to give them a nice shine and protect them. I do not want to have to do several different types of product. I am not trying to get the look of birch wood that is high gloss in old campers. I just want something to give a smoother look or shine . I think shellac would be to tricky for me, but what about some type of varnish? I would like to brush something on. Any help would be great,everything I have looked up just says paint it and I do not want to do that. The paneling is in good shape but very dull and oils and wax dont do anything. Thanks
-
- 2 replies
- 2.9k views
-
-
Been probing around trying to find some more info on using india ink in woodworking. Everything i have found so far just talks about using black india ink to ebonize wood. Has anyone used any other colours in their projects? Also, is it possible to mix colours of ink to create your own colous?
-
-
- 2 replies
- 3k views
-
-
So i just built my version of the weekend wall shelf out of cherry and i've applied 6 coats of gloss Arm-R-Seal now. The problem is it is a completely flat surface yet. i can still see pits almost as if it's an open pore wood. i did thin the varnish by about 10% on all coats to help it flow a bit better. Should i just go full strength and keep applying more until its all level? I don't want to put too many more coats on since i think it'll start to get too thick. Thoughts?
-
- 4 replies
- 3k views
-
-
Need help! Used citristrip to strip varnish off an old Craigslist find. A shelf unit with very intricate legs. The citristrip is all gummy and I cannot get it out of the grooves and dips. Can anyone help me out? I've tried scraping, but the angle makes it nearly impossible. I've used another stripped to no avail. I have also tried sanding and warm soap and water with a bristled sponge. Now I'm stuck! What do I do? I have attached some pictures for you to get a better idea of what I am describing. I brought the piece in overnight so that it could dry out a little. I'm in Oklahoma and it is still pretty cold and damp outside. Been working in the garage.
-
-
- 10 replies
- 74.9k views
-
-
I just put Good Stuff on as my final finish and saw some isolated swirl marks that were missed! I imagine my only option is going back and sanding them away and then refinishing those sections again. Any tips for doing this in only one section of the wood? Also would it be best to do all this by hand or go back to the Rotex 125? Thanks!
-
- 6 replies
- 3.4k views
-
-
I will soon be finishing a mahogany desk, Greene & Greene style. My plan is to use a GF dye stain (mixture of Orange and Med Brown), followed by a coat of Seal-A Cell and several coats of Arm-R-Seal. My quesion is... Will the Seal-A-Cell be an adequate sealer between the dye stain and topcoat, or should I putting a coat of something else (Shellac??) down before the Arm-R-Seal? I've done a few test boards and like the way it looks, but am asking more for long-term consequences... something my test boards won't tell me. Thanks!
-
- 2 replies
- 2.7k views
-
-
I am currently carving a small end table out of one giant piece of eastern red cedar. I cut it down about 2 months ago and it still has its bright reddish color but I know it will fade to brown over a period of a few years. Does anyone know a finishing technique that will preserve the color indefinitely? Thanks.
-
- 4 replies
- 3.2k views
-
-
Hello! It's been about.. oh I don't know about 16-17yrs since I actually did any woodwork and I miss it dearly. Anyway, I have an oak table that I made back in highschool and I recently got it back from my mum's place and she didn't take good care of it. Her dog must of peed on two of the legs at one point and there are a lot of water marks on the top. What I am looking to do is to sand it down and refinish it with a clear coat and have a few questions to make sure I'm on the right track still. Sanding wise, I am looking at getting a 1/4 sheet palm sander as that's what I used to use. Is there a big difference between the square palm sanders and the those rand…
-
- 6 replies
- 2.9k views
-
-
So, I may have lucked out. A TechShop opened about a hundred feet from where I work; woodshop, metal shop, plastics shop, fabrics, and a few other things tossed in, $150ish a month. (Bakery Square, Pittsburgh) They don't have anyone doing much furniture yet. (They've been open for a week in this location.) They have a spray booth, with full exhaust, and a large 220v compressor pushing air to the booth. What they don't have is a spray gun, or anyone working there with enough experience for me to ask them. Best guess of what I'd be spraying is a post-catalyzed lacquer, probably Mohawk, as there's a place that stocks it nearby. What do I want to look for …
-
-
- 4 replies
- 3k views
-
-
So, I am in a bit of a pickle. I was asked to make a headboard for my sister-in-law and I thought that she wanted it to be black. I am using poplar to build it and after talking to the guys at my local woodworking store they directed me to use xylene based wood stain on it. I tracked some down here in town and tested it on a couple pieces. Black as black can be, no probs. So now that I have it 80% constructed she tells me she wants it to match her dresser, which is mahogany. Wonderful. Having known that ahead of time I would have probably just used mahogony or sapele. But it is what it is, no worries. I have a poplar headboard that I need to make a deep rich r…
-
- 36 replies
- 20.9k views
-
-
I'm looking for recommendations to refinish an antique dining table. The table was last refinished by my mother in 1965; she doesn't have a lot of details other than she stripped, sanded, stained, and applied 10 coats of varnish. The varnish has cracked and there are a few dings where the color needs to be redone - so it looks like I'll be repeating her work to preserve this piece. My main concern is the top coat, I have 5 kids so I'm certain that the table will see some abuse but I also want to preserve the value as an antique. I've been told not to apply a poly finish because it will be hard to remove in the future (and possibly destroy the value) so I'm guessing t…
-
-
- 4 replies
- 3.3k views
-
-
-
I got an Earlex 5500 for a bathroom vanity remodel project and decided to try waterbornes. The lady at General Finishes was very helpful with questions and I'm going to use their water based stain and Endurovar for the topcoats. I started on some tests boards today on hard maple and really like the results of the water based stain. It minimized the blotching but left enough for a little character. After 2 hours I sprayed my first coat of Endurovar gloss using 1.5mm tip. After 2 hours I lightly sanded with 400 which powdered like a champ. I then sprayed the 2nd coat of gloss. How do you like to set your spray pattern? Do you turn the needle all the way in and back off X…
-
- 27 replies
- 12.5k views
-
-
I have been away from wood working for about 13 years now, and I am building my 3rd child a crib and I need to know what kind of stains and finishes and baby safe. The crib is made of red oak.
-
-
- 5 replies
- 9.2k views
-
-
Hi there. I recently opened a shop where I am going to spray kitchen cabinets and furniture for local manufactures and carpenters. I have a good knowledge of products and how to do it. Unfortunately I don't know how to price anything. and that scares me. hoping to get some help on how to price these items MDF kitchen cabinet door (one side) Maple etc..kitchen cabinet Doors (stain and paint one side) Kick toe 4 1/2 Light Valance 2 ½ Crown Molding 3” Hood 30” Fillers Corbels 12” Finished panels Columns 3” wide shaker style and 9 ft tall. (the front and one side to be sprayed) striping and staining kitchen doors (one side) Refinishing Kitchen doors (one si…
-
- 7 replies
- 4k views
-
-
Hello all, I'm making a cabinet with drawers for my router table out of poplar and I ran into a problem during finishing. I sprayed two coats of Valspar waterbased semigloss interior paint/primer (black to match the table). Then I sprayed Minwax polycrylic, also semigloss. The first coat seemed fine until one drawer front looked like the finish cracked. I left the sanding dust to show up better in the picture. I think I sprayed the poly on too think and this caused the cracking but on the other hand I let it dry vertically so it would catch less overspray and I figured if I did spray too much why wouldn't it sag or run? I couldn't try to sand it out because I didn't want…
-
- 20 replies
- 25.6k views
-
-
I'm building the 2 sheet bookcase & just about ready for pre-finishing. While looking at the directions on the can of Zinsser bullseye shellac it says it's not recommended for use under a polyurethane finish. Does the gel stain over the shellac create some sort of barrier layer for the topcoat? Marc didn't mention anything in the videos and seemed to have no problem with the final finish. Am I just reading too much into the can directions? Thanks, Dave
-
- 5 replies
- 8k views
-
-
I have some beautiful Curly English Sycamore where I want to "Pop The Grain" like Marc (TWW) did in his video "Pop Goes The Maple". In the video, when he went over to the cabinet where he stores his coloring agents, he first handled a small container that said, "TRANSFAST" and then he said, "that could work" but he opted for "TransTint" instead. My question is, if he would have used the "Transfast" insted, how exactly would he have made the recipe. "Transfast" is a Aniline Dye, where you have to mix with water. Would he have first mixed the dye and water together in a separate bowl and then add the shellac, then put it on the wood? Any suggestions would be greatly apprec…
-
- 2 replies
- 3k views
-
-
I am varnishing (with polyurethane) a table top. I have done many like this before but never encountered this problem. I applied two thin coats of clear gloss poly to the wood (nicer grade Birch plywood) before applying a colored varnish coat. The first color coat showed these signs of no adhesion or "crawling" in a few spots. Couple thoughts... 1. I did not clean or neutralize the tops prior to applying the poly....oils, dirt? Perhaps applying a wax free shellac to seal 2. Could I sand it down with 400 a bit, apply some shellac then re-try the poly? Thx for any advice....2 other tops from the same stock did not have this issue and both were prepared the same way.
-
- 1 reply
- 3.2k views
-
-
I attempted to follow the process laid out in episode 73 (Coloring Blotchy Woods). Most of the pieces came out decent, but two of the boards on one door look awful. I am using minwax oil stain (I know I should be using gel stain, but the wife insisted on this from the test pieces). I tried applying a varathane gel stain on top of the oil stain, but that didn't seem to help (just on the blotchy door seen below). The other door and large board only have a 1 pound cut of shellac and 1 coat of stain. Any advice would be appreciated. Thanks! John
-
- 5 replies
- 3k views
-
-
I want to get a inexpensive spray gun. Does Home Depot have any gravity feed guns that are decent but will not break the bank. I have a air compressor that I am going to hook it up too.
-
- 7 replies
- 3.2k views
-
-
Can I put a coat of General Finishes Milk Paint over 2 coats of old fashioned milk paint? Here is what I did I built a couple of bookcases for my wife but never finished them. I now need to finish painting but wanted to use GF milk paint instead of old fashioned milk paint. I bought GF Glaze Effects on accident and realize I can't use that over bare wood but can over the already painted surfaces. The problem is I don't want to use black glaze over black milk paint. I would rather use black glaze over red milk paint. This means I have to paint the entire book case with the red milk paint over the black, then apply the black glaze effects milk paint. Does this seem feasible…
-
-
- 14 replies
- 7.7k views
-
-
I have completed my wine credenza and now need to finish it. However, I have never finished a project of this type before. I have expermented with Miniwax Red Mahogany 2 coats and 3 coats of linseed oil. However, I still am unable to get the shine and smooth finish i want. I would like to avoid using a polyurethane as I have had bad luck in using it with items this large in the past. Does anyone have any suggestions on what I can do to get the finish to shine but not look like it is coated in plastic? I was wondering if rubbing it with tung oil after the stain is applied would do this. The credenza is made of oak and I want a dark finish with a small a…
-
- 2 replies
- 2.9k views
-
-
Hi! I'm new here! I got an older hutch that I'd like to keep, and perhaps restore. It's missing some knobs, some of the metal has started to rust and affect the wood, but those are minor issues and it seems healthy overall. However, one of its sides has cracked, probably along the grain. It seems gluing was attempted (there was some dried glue or silicon-like substance in the crack) unsuccessfully. Can I fix that side or should I replace it altogether? It is connected with dovetail joints (top and bottom connections), and some sort of mortise and tenon joint for the drawer construction. I'd have to say I have very little experience with woodworking (I can count…
-
- 5 replies
- 3.1k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,009 Total Members
- 3,644 Most Online
-
Joseph b Newest Member ·