Finishing
2,922 topics in this forum
-
In the spring I got a Fuji Mini-Mite 4 and played around with until summer hit. Now that cooler weather is coming back I'm back in the shop and getting my spray stuff ready to go. I built a spray booth and table based on plans from Jewitt's "Spray Finishing Made Simple" book and DVD. Here is my spray booth that folds down to 4" thick. Behind it I have a fan sitting on top of my table saw (crappy phone pic). I've heard that some waterbornes and aluminum can have problems. I got the converter off eBay then bought a different size cups from US Plastics. So far it's working good. Having a 2-car garage this is probably the best I can do for spr…
-
- 3 replies
- 2.8k views
-
-
I have been experimenting with decorated patterns on my lathe. I use colored sharpies to basically write on my turnings and when I use spray shellac on them the ink runs. im guessing the ink run is from alcohol mixed in the shellac so it can be sprayed. what is a good alternative finish that wont make the ink run all over preferable something I can put on while my lathe is spinning.
-
- 9 replies
- 4.1k views
-
-
I want to give a bit of character to a walnut frame I have made, before spraying on a few coats of water borne poly. How many days should the BLO cure before top coating?
-
-
- 8 replies
- 3.7k views
-
-
Making some garage/shop cabinets as my first "big boy" woodworking project. The purpose of the project is 80% to learn how to use some woodworking tools and gain some skills, and 20% because I need some cabinets (it would have been way cheaper just to buy them!). Anyways, cabinets are mad of some sort of pine (called "white wood" in the big box, the 'Chablis' of lumber..). Kind of like the build, willing to make finishing a little more complicated if I can learn something from it. No desire to stain, unless the finish itself has some colorant. Shellac, poly, varnish, something else? What do you think? Also what application method? Just looking for recommendation,…
-
-
- 3 replies
- 2.9k views
-
-
In Italy it's easy to find 99.9% alcohol to prepare shellac flakes, but it's only available with a colourant added - making it pink. Just like the 90% stuff in the supermarket. This doesn't seem to make much difference for normal shellac, but what if you want to use the superblonde variety? I'm not overexcited about having a pink finish on my work. I'd read that the colourant can be removed by 'bleaching' in sunlight, so I gave it a try. Know that my balcony gets sunshine only in the mornings, (though it is Italian sunshine ), this is the result after about 20 days: Don't worry, the container was only half full - nothing evaporated! John
-
-
- 4 replies
- 2.8k views
-
-
First time user; please bear with me as I try to get up to speed in participating. I regret that I now have experience with the failure and removal of so-called Super Shield fluoropolymer from my beautiful new 1200 sf square foot ipe deck on the Lake Michigan shore in the Indiana Dunes. We found the most efficient and effective technique to be pre-scraping with 4 inch replacable-blade wallpaper scrapers to knock off the flakes of failed and failing coating. Interestingly this worked well with the deck either wet or dry. Ironically, the finish was failing so quickly that a significant amount of the finish virtually fell off. After experimenting with a variety of…
-
- 6 replies
- 6.7k views
-
-
I am in the process of staining maple for a Bar. The bar top will be a like a cognac or mahogany color on maple plywood and the sides will be maple ply and 1x3's with an ebony stain/dye. I know maple isn't the easiest wood to stain dark but it's already bought and cut and this color combination is necessary for matching purposes. I have tried the varathane ebony stain on a few pieces that have been sanded with 120 and 180 grit. But it is blotching a bit and has taken 3 coats and still not close to the dark ebony I'm looking for. I didn't want to use a sealer first to eliminate blotch because although I have done this in the past with success it does lighten the …
-
-
- 11 replies
- 10.1k views
-
-
Hello all, I'm nearly done with a walnut side table project, but having difficulty removing the face marks I made with light-colored chalk. It all seems to disappear when I wipe the piece own with mineral spirits, but returns when the wood dries. Any suggestions on how to really get the chalk dust out of the grain? I really don't want to end up with chalk marks showing through the finish! Thanks in advance, Ross
-
-
- 6 replies
- 3.3k views
-
-
I'm new to furniture and I purchased a new project, when I started taking it apart to evaluate what I will be purchasing for the project I stumbled on markings. I'm assuming they are for the year the piece was built, but I don't know enough to make out what I am seeing. The wood is in great shape and has a slight wrinkle in surface from the age. I think I will simply upholster the piece and enjoy it. Thanks for any info!
-
- 4 replies
- 2.8k views
-
-
I was spraying some frames today, and came across an issue, or a non issue perhaps. When I was spraying the frames, I started off the workpiece and put a nice level coat on, and stopped when I was off the workpiece. The concern is that when I start to spray the perpendicular frame piece, I recoat part of the previous piece. This means that corners will receive twice the amount of finish that the rest of the frame will. The fan of the spray is wide enough to cover the corners no matter which direction I spray. When it dried, it looked fine. Is this a concern? Am I over thinking things?
-
-
- 1 reply
- 2.9k views
-
-
Hello All, Well, I'm contemplating a new (relatively simple) project: a badger hair shaving brush. For you young-ins out there who don't know what a badger hair shaving brush is, you should pick one up and give it a try. ;-) Anyhow, to the point: this brush will get absolutely soaked every time I use it. I'll of course do my best to dry it off, but it's definitely going to take a beating from water. I'd also love to have it last for a very very long time, if possible. Can anyone suggest a super duper waterproof finish for me to use? I'd love to have a finished brush that I can just use and not have to worry about too much as far as water is concerne…
-
- 8 replies
- 4.5k views
-
-
I read somewhere about a person using rit dyes mixed with 91% alcohol to dyes wood. Has anyone here tried that? Could a mixture like that be shot through a spray gun? It sure would make some colorful, low cost finish available if it works. Sent from my KFTT using Tapatalk HD
-
- 4 replies
- 3.3k views
-
-
…It won't get hard… I'm talking about Tung-Oil, of course. HI folks, i'm finishing a beechwood sushi tray with tung-oil (chestnut brand) but i'm not sure it's working fine. From what i know, you'r supposed to leave the olied rag on the concrete floor over night and then trow it away the next day when it's dry and "crispy"… Why my rag remains wet even after 24h? The wood surface also remains a bit oily (not wet but it leaves your fingers shiny)… Am i having a probelem or can i go on applying coats?
-
-
- 8 replies
- 3.2k views
-
-
I just purchased an alder table from one of the shops in Scottsdale that we will be keeping outside under the covered part of our patio. I wanted to put a protective finish on it. It will not really get any direct sunlight. I just watched episode 46 in which Marc describes his BLO-naphtha-Epifanes mixture and wonder if that is still an appropriate finish for this table. The table has already been finsihed and it looks like an oil based finsih but I am not completely sure. Will this still work?? I have had some recommendations to use Pentofil Oil Finish. Thanks, Jeff G
-
- 4 replies
- 2.9k views
-
-
My gf recently got a new dining room table (store bought) and used a cleaning wipe on it. Now, there are streaks in the finish and we aren't sure if we can get them out. My first thought was Murphy's Oil Soap, but that didn't work. I'm thinking a buffing compound/wet sanding might work, but I wanted to run this by folks with more experience than me. When she called the store, they said that the alcohol in the cleaning wipe likely corroded the finish and there may not be a way to restore the finish. I've included a few pictures, they aren't great but you should be able to see the streaking. Any help/product suggestions would be hugely welcome! Thanks! …
-
-
- 25 replies
- 35.9k views
-
-
I was wondering what filters you used/are using to spray water borne finishes (episode 155). I am unsure what filters to use in my 3M 7502 respirator. I contacted 3M and sent them the MSDS info. They told me that they could not recommend a particular filter set, as many of generals ingredients in the high performance finish are proprietary. I have the 6001 organic vapour cartridge, as well as the p100 filters (2091), and they assemble, together with the adaptor (502).
-
-
- 20 replies
- 4.4k views
-
-
Hi there! I'm refinishing this table for a friend and number one, I wanted to verify the wood is pine and number two, get recommendations for removing the dark splotches on the wood. I've stripped the top and I started sanding with 80 grit. I know that is rough for pine if it is pine but there are some deep scratches and dark spots. The goal is to re stain to match the refurbished bottom and I know that I can't make it perfect but i want to make it nice as possible even if it is a little rustic/primitive. So my goal is to finish sanding with 80, then step up to 120, then 220. I also know that I'm skipping some grit levels for some wood workers taste. So would …
-
-
- 11 replies
- 3k views
-
-
I have been making a number of kitchen items and finding that even though I raise the grain at the end of my sanding and sand one last time with my finest grit before applying finish, that I am still getting raised grain and fuzzy texture after the item's first use. Very frustrating, especially since I've started selling at a local farmers market. I thought the idea of raising the grain on kitchen items was to avoid these annoying fuzzies. It seems to have little affect for me. I'm wondering if others have this issue as well and what your process is to avoid it. For reference, here's what I've been doing: sand up to 400 grit, wet down with a cloth, wait for the wa…
-
- 2 replies
- 3k views
-
-
I want to seal some cabinets with shellac before glue up than finish with poly my question is if this is a good idea or not? I've used both products on numerous occasions but, never together.
-
- 4 replies
- 2.8k views
-
-
hey everyone so the story here is that i'm making a 120gal bubinga vivarium. the plywood is coated with a bubinga ply on both sides. its not waterfall bubinga.(darn it) but it'll still work. i watched "Pop Goes the Maple" and i thought i would go ahead and do that kind of finish on it. but i know there's some experts here that might recommend me to something different. i really want the grain to pop out and have the depth for the wood. keep in mind, i live in sask, canada. so products being recommended to me should be available in my area. as it stands, the wood is really orangey. lol here's a bunch of pics of the wood i'm talking about.
-
-
- 8 replies
- 4.1k views
-
-
-
My father just finished building a bed out of poplar for my son complete with headboard, side rails and footboard. Junior wants it stained a classic red mahogany color and I need help. Should I precoat with a 50/50 shellac/denatured alcohol mixture or use a different mixture/product. How many coats should I use prior to staining? What type of stain should I use - oil base, gel, water base dye, etc.? Brand preference - Sherwin Williams, Minwax, others, etc.? Preferences on topcoat(s) after staining? I don't have spray equipment so the job will be "by hand". I'm "pretty handy" but am relatively new to wood finishing so any help is greatly appreciated. From my …
-
-
- 13 replies
- 13.5k views
-
-
I have a veneer table that I am refinishing. After stripping and sanding it I used the conditioner then stained it. Right off I could see all kinds of scratches from my sanding job. I then sanded it down again making sure to smooth out the scratches and started over with the conditioning and staining. Now the stain is really blotchy and there are a few swirls from the sander that show through. I am worried that if I try to sand it down again I will be out of my veneer layer. Are there any other solutions to fix my mess? The table is also very difficult because the wood goes all different directions :-(
-
-
- 15 replies
- 29.1k views
-
-
I am a retired rough carpenter (framing, steel framing. drywall, etc). Finishing is not my forte. I have just finished my largest project. A 3 box 6'-6" x 7'-0" display case. I just finished staining it. Oak sub-strut with English Oak stain. The instructions on the stain can say to not let the stain set for more then 3 minutes. I am in Las Vegas, NV where it is 800 degrees out. After applying stain to one 16" x 7'-0" side the stain started to dry before I had a chance to wipe it down. Now I have a blotchy stain job. Instructions say not to sand between coats. 1. Why not sand? 2. How do I even out my finish?
-
- 13 replies
- 3k views
-
-
Hey everyone I'm finishing a few outdoor chairs with "Man of War" spar varnish. I started with thin coats and incrementally increased the varnish to achieve a better built up. On my last coat I ended up with streaks & splotches. How can I fix it? I'd like the finish to look even. I don't really want to start over if possible. Here is the process I used: All coats were wiped on. Coat 1- 1:1 spar varnish & mineral spirits Coat 2- 1:1 spar varnish & mineral spirits Coat 3- 2:1 spar varnish & mineral spirits Coat 4- 3:1 spar varnish & mineral spirits Any help would be greatly appreciated.
-
- 5 replies
- 7.5k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,009 Total Members
- 3,644 Most Online
-
Joseph b Newest Member ·