Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by bigmessuk,

    I've recently pulled up the ancient carpet on my stairs in order to strip it back to an Oak finnish to match the rest of the house. Since pulling the carpet up I've discovered that there is a thin layer of gloss paint over what looks like old crystallised carpet padding that has sealed to the wood. The stairs are tight so I am unable to use large sanders and my handheld just isn't strong enough. It wont get through the padding. Does anyone have any solutions for stripping this material back? Soap and water seem to loosen it some what but Im worried about damaging the wood. A heat gun and a scraper have some effect but it'll take a month to get it done! Than…

  2. Started by Dave H,

    Just wondering if I could add trans tint dye to some Bulls Eye shellac that I have, the clean up directions says alcohol so I'm thinking yes, but would like some reasurance as I've never done this? I was going to tint the project but didn't want to raise the grain, and since putting the tint in alcohol would work, just thought I might solve the problem by just adding it to the shellac.

    • 5 replies
    • 6.8k views
  3. Started by Joel Turner,

    I've stained a lot of things before, and never had this happen to me. Just wondering if anyone else had this happen, or know of a way to fix it. The only thing I can think of to do is once its completely dry sand it and reapply.

    • 2 replies
    • 2.9k views
  4. Started by Jasahan,

    K, I did actually search the forum and google before posting this. I found how to make a baby safe finish of beeswax and mineral oil (how important is the turpentine?). But I want to know how to color it, because I'll be making toys and stuff. So that's my big question. How, specifically, would I create a colored beeswax finish? And not just browns. Ideally green and other fun stuff. And an extra question (three now?). Has anyone tried the beeswax finish over milk paint? K, thanks.

  5. Started by shannonlab,

    I've watched Charles Neil's fine two-part video on Rubbing Out in which he uses soapy water and Abralon pads with an orbital sander. Here's my problem: I want to do an "in the field" rubbing out of several pieces of lacqured furniture, where I won't have access to an orbital sander. I will have soapy water, Abralon pads, and a circular hand sanding disc to which an Abralon pad will attach. Should i do the rubbing out in circular patterns, trying to emulate an orbital sander? Or, should I do the rubbing out by sanding "with the grain" and not use circular motions? I read coflicting opinions on this. Your input and experience will indeed be appreciated. …

  6. Started by jmrnavydoc,

    I'm an American living in Italy, trying to make some of the rocking horses featured last Fall. I'm looking for the finishing agents in local stores and i'm completely lost. I have not been able to find any shellac (and google translate says shellac in italian is "shellac") or gel stain. Any thoughts on 1) what other name they could be under (or if i'm lucky someone who knows italian and can tell me what to look for); or 2) other good options for finishing that is kid-safe and should be able to find. I'm thinking of ordering the gel stain and shellac from Rockler, but not sure they can ship it to me, and if so, could take a month or two on a boat over... Thanks! Jon

    • 7 replies
    • 3.4k views
  7. Started by AZHusker,

    Marc, We just started a new custom drum company (M4 Drums) here in AZ and I am trying to determine a better way to finish the drums. I have been spraying Gerneral Finishes High Performance gloss/satin with good results. However, I can't quite get the high gloss "glass" finish I am looking for after buffing them out. I have been reading about Lacquers but have never used one. It seems like Acrylic Lacquers might be the right choice because they don't yellow with age. I was wondering if there is a good Acrylic lacquer you prefer and/or is there a less toxic water-based acrylic lacquer available that will get us the results we want. Thank you for your time and…

    • 5 replies
    • 6.8k views
  8. Started by abowers,

    I am unsure of terms here. What is a varnish compared to a finish. I know of lacquer and polyurethane as finishes. Is varnish a general term for the two? I was considering Mark Spagnuolo's video on varnish, anyone recommend? Thanks

    • 11 replies
    • 4.6k views
  9. Started by rodger.,

    I came accross this video the other day while on FWW.com. It is a very basic finish, but a great place to start for newer woodworker. Check it out: http://www.startwoodworking.com/getting-started you'll have to scroll down to episode 8.

    • 0 replies
    • 3k views
  10. I do not have a lot of options for water based locally. The other brand is Zar, but it's a bit pricy.

    • 10 replies
    • 3.1k views
  11. Started by wojo2,

    I am making a bookcase out of cabinet grade maple plywood. I created a test strip of different color stains to see how they would look from a pieces of scrap plywood (fortunately, otherwise I would be crying and out several $$$ for new plywood). Here is the problem: When I applied the Watco Clear Danish Oil, the cherry stain was completely lifted off the wood. The other stains did not do this. I had applied these stains, in my air conditioned basement. I do not have a humidity problem in the basement. The steps I followed are: Applied one coat of Zinnser's SealCoat. Allowed to dry several hours. Applied two coats of the different Gel stains. Allowed to d…

    • 3 replies
    • 10.2k views
  12. Started by StrangeRANGER,

    Hey guys, I just picked up a Graco 2900 HVLP Spraystation. This has been a life changing experience! I have put off HVLP due to price and it was also intimidating. If I had known that $130.00 tool could transform my finishing I would have done this a long time Ago. The amazing results I am getting with a cheap sprayer, I can only imagine what a high end one can do. Here is my question, I am spraying Zar Aqua water based poly on birch panels for kitchen cabinets. I have sprayed 3 coats, all are light and drying fast. Do I need to use more coats when spraying or should I try to put them on thicker? I am using gloss and would like a high gloss finish. I am sanding betwe…

  13. Started by fordfan485,

    I have bunk beds that my grandfather made for me as a kid about 20 years ago that are made out of pine( I think not 100% on this) and are stained to a honey color with no sealer/poly on top of the stain. My wife wants me to re-stain these to match some furniture (a baby crib and a dresser that we recently ordered) that is maple with a cherry stain. What would be the best way to tackle this problem? I'm thinking I would have to sand a significant amount of wood on the bunk beds to get it to bare wood to re-stain. This would be huge sanding job since the bed is rather large and has solid panels at the head and foot of the bed. I have read that pine likes to soak…

  14. Started by theyoungwoodworker,

    I am refurbishing a bench and the paint is chipping off after i have sanded re painted it can i apply poly on to of the paint?

  15. I have a Graco SprayStation 3900 and it works great, but the gun and parts are all plastic. No complaints but you get what you pay for. Can I Purchase a better gun, and then eventually upgrade the pump and hose or does it need to be bought as a system? Would the Graco SpraySation be considered a turbine unit?

  16. Started by mar10z,

    I previously posted in the refinishing thread to get some ideas, but after further investigation I think my question should be posted here. Here is my thread: What finish should I use that will be durable under higher heat and sunlight but not really weather. I was thinking spar urethane? And, how would I ,or could I, match the color of a chip that I have from the previous finish. I am planning on stripping the current finish and not staining the wood. Any idea would be appreciated. Thanks

    • 2 replies
    • 3k views
  17. Started by John Clark,

    Hey all, I just finished the first of a pair of folding tray tables made from teak. I finished the first one with teak oil and I am wondering if I should put on an additional top coat for protection. I love the way the teak oil makes the wood look, but I hate the thought of having water rings on the table later on. Do I add a top coat (and if so what) or do I just theaten violence against anyone who does not use a coaster?

  18. Started by Stratman_69,

    Hello forum! I am currently working on a "hoosier-style" cabinet that is missing the support hinges for the small bin in the middle. I am not sure what hinges to use to reattach and could use some help! I have submitted a pic of the top piece, as well as a close up of the bin on its side where holes for the hinges can be seen. There is also a single screw on each side of the frame where it sits and groove marks (the discoloration) where I assume the hinges used to scrape the sides. Any help would be greatly appreciated!

    • 3 replies
    • 2.9k views
  19. Started by 00101,

    Bought some aerosol spray lacquer at the local home improvement store for an aquarium canopy. I've never actually used a lacquer in any form so I wanted to give it a shot. I had done a little casual reading on lacquers and it seemed the consensus was that its best to spray it, and because of my lack of spray equipment I decided to go with the spray can. Its the same brand (Watco) as the can lacquer they were offering so I'm assuming its the same stuff. Has anyone ever used watco aerosol lacquer before? Any tips for this or for lacquer finishing in general would be great. Also would I have any problems if I used a sealing coat of shellac underneath the stain with the la…

  20. Started by jimabbruzzese,

    I have recently stripped down an old night stand that was finished with what appeared to be a tinted shellac. This is part of a bedroom set that was handed down to me from my great aunt. Best I can tell, the furniture was bought in the 50s or 60s. I have used it for years, but I did a number to the top with a water glass. The water stain sanded out, but the areas behind the drawer pulls are a different shade than the rest of the stripped wood. The drawer fronts have been sanded to 220 (60 - 100 - 150 - 220) and yet the faded areas remain. I don't want to have to be forced in to using the old hardware, but I am not sure how to get rid of the fade. Any suggestions are…

      • Like
    • 8 replies
    • 13.9k views
  21. Started by sbarton22,

    I'm working on a keepsake box...oh, say 8x10,4. What kind of finish do folks recommend for this application? I was initially going to use the first two buffs on the Bealle system (before glue up on the interior pieces), assemble, some kind of penetrating oil, and then a couple of coats of a water based wipe on poly for durability. I feel that polishing on bare wood has a unique look to it, but maybe it doesn't and I'm nuts. After thinking about this, I've run myself into a circle as to the validity and value of this recipe. Can I get a couple of opinions on other folks like to do and/or a thought process on my recipe (for disaster)? Any kind of sanity check wo…

    • 6 replies
    • 3k views
  22. Started by ddh,

    I'm just completing my first real woodworking project, a Stickley 622 kitchen table.. I am planning on using a wiping varnish, General Finishes Arm-R-Seal Satin. I've read Marc's finishing booklet and seen his video so I'm pretty clear on the process for the table top, though I do have some trouble having enough work time to complete one full length of the table top without having to re-soak my folded t-shirt applicator. I'm sure this is a real newbie question, but my main question is in regards to the finishing the table legs and stretchers. Do people typically finish the legs with them standing and wipe on the varnish on all 4 sides, taking care not to put it …

  23. Started by DenHammer,

    Hi Marc, After rewatching your video on popping the grain on curly/tiger maple I am about to do it to a wine rack I made but have no place local to buy tint for the shellac and I am not interested in waiting for it through the mail. So therefore I have a few questions. 1. Does Amber shellac offer a comparable result to the process you showed on the video? 2. Can a regular stain say minwax be used to tint the shellac? 3. And assuming the answer to number 2 is yes (ignore this if it's no) do you have a color reccomendation and proportion reccomendation for the mixture? Thanks Dennis

  24. I have a dilemma about what finish to place on my cedar boards on the outside/inside of my arena. There will be 1500 boards running vertically and will be 1/18 x 5" x 5'tall. With this volume, both sides I need to consider cost of material and my time labor. I lean towards tung/linseed mix cut with thinner. Could you give me your insights to this mixture. Or contrast them with duck back or similar type products? Thanks

    • 3 replies
    • 3k views
  25. Started by Irvingj76,

    What I thought would be the most efficient way to finish the inside of a cabinet, i applied three coats of top coat urethane without considering that one side of the cabinet will be open shelving. So, now I have a portion of my cabinet with top coat over maple, that needs to be painted white with milk paint (general finishes). Can I apply the milk paint over the top coat? thanks

    • 3 replies
    • 4.4k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.