Finishing
2,922 topics in this forum
-
I have very little experience with staining - normally preferring to leave my projects in their more natural state, just coating with a clear poly or shellac - but I have a maple ply shelf case already built that I've now decided to edge with walnut. I would like to stain the maple to a relative match with the tone of the walnut trim/edging. I don't need an exact match, after all the maple will still be maple and I'm not under the illusion that staining would fool someone who looked closely. What I do want is something close enough that the maple is not contrasting with the walnut, but blending into the background. I've done some quick stain tests on scraps of the ply…
-
- 5 replies
- 3k views
-
-
I am just finishing a side table with a quilted maple top and would like to use a tung oil to enhance the grain. Is it best to put a finish on top of the oil protection or would the oil be ok on its own? Thanks, Shane
-
- 6 replies
- 3.9k views
-
-
Hey Marc-- I'm refinishing an antique child's dresser. It's made of quarter-sawn oak. As I've sanded it down it appears that the oak is extremely porous from age and dehydration. Should I use a product like a sanding sealer before I stain the piece? If so, what would you suggest? Thanks in advance.
-
- 1 reply
- 2.7k views
-
-
I am building a living room set that consists of two end tables and a coffee table. I saw the aurora table in the gallery and was wondering how it was finished???
-
- 1 reply
- 2.9k views
-
-
Hi, just finished (better say ended the Woodwork) on my first project not using premilled wood. I build a smal box for a special knife I got from Japan, as this knife is pure in its metal, the blade isn´t even stainless, I decided to aply some coats of beewax to the wood, without filling the pores or doing anything else to the surface, then sanding. The problem I came up are these small white dots inside the pores, which disturb the figure of the wood. I used cherry for the box, which is seated on a wenge "board" on (I don´t realy know what type of wood, but beautiful black) feet. So, how can i get rid of these white spots on the wood resulting from sanddust in the por…
-
- 9 replies
- 10.3k views
-
-
Any opinions on milk paint? I have seen it pop up in magazine articles latley, and thought maybe I would try it on a bookcase, or something. Anybody use it before? I know Lee Valley sells the "mix-it-yourself" powder varietry.
-
-
- 11 replies
- 4.6k views
-
-
I recently had new construction windows installed. In the bathroom I fabricated and installed the jamb extensions and trim using cherry. In all the other rooms to date I used poplar that I painted with an interior latex. With the cherry, given the bathroom humidity I used three coats of a water based poly. ThE problem is I'm getting discoloration between the shade and window. I'm assuming that this is UV damage. Is there a Finnish that would've been better? I'd like to do the same with the windows in the kitchen but obviously have to fix this problem first. Thanks
-
- 4 replies
- 3.7k views
-
-
I've just made a cherry version of the Roycroft "Little journeys" book shelf. The top is made of two 7" wide pieces of cherry, but both have a little sapwood on them. I was planning on "baking" all the piece in the sun this week before finishing with BLO and then either shellac or spray-can lacquer, then hand rub with some 000 steel wool and wax. I know that sapwood doesn't tend to darken as much as the heartwood, but how big a difference will I see? will BLO help, and should i do that before sunning the pieces? I'm very new to the finishing world, so I am open to suggestions on all fronts here.
-
- 1 reply
- 9k views
-
-
I have an old wooden officr chair. Not sure of the kind of wood. It's got a darker stain. And it has some form of sealer, most of which is worn away. Also, a few weeks ago, it had a BUNCH of watet running on it for about a half hour. I'd like to restore it. Is there some kind of oil ir something I can put on it? What is best for sealing that kind of chair? I'll try to get a close look at it to see what kind of wood it is.
-
- 3 replies
- 3k views
-
-
What are the rules for sanding playwood. I have not worked with a lot of plywood before and am worried that my ETS 150 will be a little too aggressive.
-
- 6 replies
- 24.8k views
-
-
quick question. Do I have to apply poly to the sides of the cabinets that abut each other? I am in the finishing stages and apply poly (oil based poly) is not a big deal..Just wondering if I am wasting my time doing this. Also..I am planning on applying 3 coats of poly to the face of the cabinets..that sound ok?
-
- 1 reply
- 2.8k views
-
-
I watched your video "Oil Based Finish Basics" I have a question on two specific products that you may or may not have any experience in. The first products is Waterlox. It's an oil/varnish blend that I was wondering if you had experience in, what you may like about it or not like about it. Waterlox Second product is one you didn't discuss in the video, mostly because its availability is slim, and you'd have to order it somewhere. And that is Hemp Oil. It is also a true oil, like Boiled Linseed and Tung oil. I discovered hemp oil while browsing lumberjocks.com and saw a product called "Homestead House - Hemp Oil Wood finish" Hemp Oil Do you have any experie…
-
- 3 replies
- 2.8k views
-
-
Hi, just found this forum and this is my first post......hopefully not my last. I am fairly new to spray finishing and just took the plunge and bought an Earlex 5500 spray station after alot of research. The question I have is how long can you leave the gun without cleaning it. The reason i ask is that sometimes i am doing small projects using water based clear and I was hoping to put on several coats in one day if drying time allows. This as you know may be several hours. Is it ok to leave the gun in an uncleaned state for this long while waiting for a coat to dry. If not is there a trick or method that can be follow for this situation. I am hoping that I do not have …
-
- 3 replies
- 3k views
-
-
Hello all i'm new here and i need help and tips. I'm beginner in wood carving and i'm in last year at school.Now i'm carving my designed clock from lime wood (it's best for small ornaments carving for beginner) and i need to finish it.i need suggestions how to finish it ( what varnishes or oils i should use?).i want that wood would become darker (brown colour) but ramain like wood ( not to shining just darken wood).Lime wood dont have any beauty in its fibers but i used it because it soft wood.so i'm looking forward to here any tips,thx if somebody want picture of my (Unfinished ) clock tell me and i will upload it. P.S. sorry for my english, it issn't realy go…
-
- 1 reply
- 7.2k views
-
-
I am finishing up the rough design of my new workshop that I am putting in a 1,000 sq ft garage. I have left an 8 X 10 space for a dedicated spray room. I am a newbie and know diddly about spray room design so I am looking for some recommendations. My plan was to put a two 3' doors as a French door in one end with drop-in filters in the doors and then put a wall-mounted exhaust fan in the other end which is an exterior wall. I don't have a clue what size will be required for the exhaust fan. I also know some say you absolutely need an explosion proof fan while others say they have been just fine with a conventional fan. Sooooooo, please let me know your thoughts…
-
- 10 replies
- 6.2k views
-
-
This is a shot in the dark question, but I thought if anyone would know (or knows someone who would know), it would be you guys. I have this game (photo attached) wherein you spin a top inside an enclosed tabletop and it moves around and knocks over little bowling pin like objects, you get more points for different pins and its actually pretty cool. However, it is very old and the floor is no longer level, there are low spots where the top goes and never comes out, also there are dents and imperfections in the floor that can send the top askew. My question is this, is there a product, an epoxy or resin or something that I can pour into the floor of the box and have i…
-
- 3 replies
- 3k views
-
-
I recently purchased an armoire that I found some structural issues after getting it home. I have resolved the structural issue but I now have a problem with the two drawers that are in the base cabinet under the upper clothes closet. On each drawer, the back inside corner of the drawer is lower than the rest of the drawer by about 5/8”. Upon careful examination, I see that the fronts of the drawers are warped with the top inside edge of the drawer front rolled back which was caused when the back corner of the inside drawer side panel was forced down from the weight of the clothes closet above. The drawer construction is dovetail and all joints are still tight. I b…
-
- 9 replies
- 19.7k views
-
-
So the question is, has anyone used Feneral Finishes Pre-Stain Conditioner? I know Charles Neil's is great stuff, but I want to know of anyone has actual experience with GF's. All their other products get such good reviews, hoping their pre-stain is good too. CN's is just too expensive. I've heard positives of Cabot's as well.
-
- 3 replies
- 2.9k views
-
-
Has anyone used the Rust-Oleum Cabinet Transformations product? I am looking for a quick (meaning as little pain and anguish as possible while still being able to be performed around a 2 yr old) and economical way to refinish the kitchen cabinets. I am welcoming any and all ideas.
-
- 3 replies
- 3k views
-
-
Im giving my son in law my hvlp, so were looking for some ideas for alternatives to a spray booth. The shop is nice with a 16ft door on both ends so ventilation is no issue. The only thing that will be sprayed is clears either precat or WB. Even with just clears you end up with overspray dust on everything. Ive see those little booths where people use a box fan with filter, and cant really see a little box fan doing much of anything. So the kids bright idea is a wall of box fans, mayber 9 or 12 of them all screwed togethter mounted in a rolling frame with a filter over each one. It would be thin, light, cheap and can be rolled out of the way. In theory I guess if he spray…
-
- 5 replies
- 3k views
-
-
Alright, folks... I've made a mistake. All you perfect woodworkers can start hurling insults or rocks. The rest have to give advice, right? In Denver, we're getting near the end of working-in-the-garage season. It snowed ~10" today, for example. I've been teaching my friend a bit of woodworking this year, as he wanted my help to build a large rustic slab-style dining table. (Nice easy first woodworking project for a guy who doesn't have much spatial sense or patience, wouldn't you say?) Since I'm such a sucker, I jumped in with both feet. Wood (Lenga) was purchased in April, and we're still fitting joinery in October... To make a long story short, I'm in…
-
-
- 11 replies
- 4.6k views
-
-
I'm looking for a high gloss wipe on poly. The key characteristic being the wipe on part. So, with that said, what are your favorite brands? I have tried the Minwax WOP from Lowes, and it was fine, but I felt it was lacking something. I have tried a water based WOP from General Finishes...I think it was called Premium Finish? I liked that a LOT, but it was a satin finish, looking for a gloss finish this time. I don't know the correct GF product I would want. Any suggestions are greatly appreciated.
-
- 7 replies
- 3.8k views
-
-
Can I use a water base poly over a tung oil finish?
-
- 5 replies
- 9.8k views
-
-
Hey all- I am making a breakfast bar out of some west coast chinquapin...I believe it is Giant Chinquapin. The wood is fine grained and hard, a grey brown similar to chocolate milk. Some sections of it are a creamy white with some fine looking spalting. I would like to darken the chocolate parts if possible, without obscuring any grain or figure. Anyone worked with this wood before? Can I treat it like walnut? How do you darken it? I am planning on a final finsh with a wiping varnish- and I would like to leave the spalted sapwood the creamy color it is. Any suggestions?
-
- 0 replies
- 3.2k views
-
-
I tired my hand at dyes this weekend. Normally, not my cup of tea, but I decided to get way outside my comfort zone. I applied per the directions (used a Briwax aniline dye). I let it dry longer than instructed. Then I went down my normal path of adding a penetrating oil to begin the finish process. When I did this, some of the dye started to pull up. Is that normal? Should I have let the dye dry overnight?
-
- 3 replies
- 3.2k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,009 Total Members
- 3,644 Most Online
-
Joseph b Newest Member ·