Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Marc: I'm a beginning woodworker that has gotten a lot from your website and shows. Thank you for that. In fact, my first piece of furniture borrowed heavily from your Gadget Station legs. See below: http://woodtalkonlin...ture-done-pics/ Where I'm really lacking is finishing. I bought your book and your DVD. They are full of great information. However, I can say that I would like you to expand in one area. You see, during the DVD you show us how to finish a flat piece of wood with the simple wipe on finish. But unless I finish all the parts of a piece before assembly, this isn't super practical. How do you wipe on a finish when you have a whole piece wi…

    • 6 replies
    • 2.9k views
  2. Started by croessler,

    I am building a desk top from a large Padauk slab. So, the question in my mind is that should I fill the pores? This is a fairly open grained wood; Just asking opinions As I have only turned this wood or used small pieces in cutting boards not furniture.

    • 6 replies
    • 4.3k views
  3. Started by Nick2cd,

    i read that you can use it like a wiping varnish and apply with a lint free cloth or you can brush it on with a foam brush. does it need to be thinned first? do you apply it heavy, let it soak in, then wipe off excess? sand between coats? can you get a glossy, mirror finish with it?

    • 6 replies
    • 24.7k views
  4. Started by JayTalbott,

    There's a bit of a story behind this that I won't go into, but I'm building a bunk bed for one of our dogs. The main part of the bunk is built as 4 tapered legs and 4 aprons, with a cleat around the inside bottom edge of all 4 aprons that matches notches that were milled out of the inside corners of the legs. I also milled a chamfer on the outside edge of each leg and beveled off the top outside corners of each leg using a chisel. The cleats will support a simple rectangular frame that was made with simple half-lap joints that will be covered in fabric, sort of like a cot. On top of that will go a dog bed that we bought at PetSmart. The inside dimensions of the bunk we…

    • 8 replies
    • 8.9k views
  5. Started by sbarton22,

    I turned a small bowl out of mahogany. To finish it, I wanted a penetrating oil before I buffed it. Upon further review, I'm not sure how successful my decision was. My mentor said that's how he finished his, so I went right along. I understand that danish oil will cure in the wood and strengthen the final product. I also know that most oils will add a warm tone and generally pop the wood grain. The reason I started to question it was because no matter how much I flooded the surface, the mahogany just sucked it right up. I must have 6-8 coats on a thin bowl (less than 1/4" thick). (FYI, I would flood the surface for 30+ minutes and wiped off any excess and let dry f…

  6. marc - sorry to bug you. i tried asking about this in a forum, but didn't hear back from anyone who seemed to know anything about salad bowl finish/wiping varnish and the way it might interact with mineral oil. here's the original post in the other forum if you care to peruse the two (somewhat lame) answers i got: i'm wondering if it's okay to use mineral oil on a board that's been varnished. does this cause problems with later coats of varnish not being able to cure properly and become food safe? or is it perfectly okay? since i've gone into business i feel like i need to have a really good handle on this to properly serve my customers. i've tried to do some…

  7. Started by jtooley75,

    I am newer to woodworking and have a question about refinishing a bed. The bed is painted white, and the customer wants an espresso colored stain applied to it. 1.) Is sanding going to be the best method to remove the paint? 2.) what type of stain/finish products do you recommend for the espresso look? 3.) what charging formula would you use for charging the customer for a project like this? Sorry for all the questions. I usually build small projects as a hobby and this is my first refinish job that someone is going to pay me for. Any info is appreciated. Thanks.

      • Like
    • 12 replies
    • 10.4k views
  8. Started by Ezee,

    I'm planning on doing some wainscotting in a newly finished basement. To save a lot on wood costs and seasonal movement of the wood, I plan on making the stiles and rails out of 3/4 birch ply, a flat panel of 1/4 ply then trim the panel with poplar bolection moulding bought from a lumber yard. Also a cap made from poplar and base moulding from the same. I also plan to order doors in poplar. SO, my question is, is it a pipe dream to think I can stain/color birch and poplar to appear (to the average person) to look the same? I would like to go with a darker color, possibly like dark cherry or mahogany. I realize the differences in grain patters cannot be altered. As far as …

    • 6 replies
    • 3.3k views
  9. Started by darty,

    I'm going to be using their dye stain on a desk and top coating with endurovar. How long should I let the dye dry before the endurovar is brushed on? I did a test board and the enduro "pulled" some of the stain off. I'm using a foam brush if that matters.

    • 6 replies
    • 5.8k views
  10. Started by Spencer Bates,

    I'm in the process of finishing a project and I'm using my new earlex 5500. I have already sanded down the first coat of finish because of this but I keep getting a weird splattering texture. I thought it might just flow out nice and even but it remains in the dry finish (oil based paint, thinned with acetone). I am wondering what I'm doing wrong... I'm trying to get a nice perfect surface but it isn't happening for me... Any thoughts?

  11. hey all - i'm wondering if you think it would create a problem if an end grain cutting board that has been finished with a salad bowl varnish were to be oiled later on with mineral oil. if the board were sanded down at a later date and given a new coat or two of varnish, would the mineral oil in the wood create problems with the new varnish curing and becoming "food safe"? any help/expertise would be appreciated. many thanks...

  12. Started by vig129,

    I built a chess board with curly maple and wenge,I am having problems with the grain.I am trying to get a high gloss finish, I sprayed 10 coats of lacquer and the grain still has indents. should i have used a grain filler and would it show up a different color in the grain. Thanks vig129

      • Like
    • 6 replies
    • 4.2k views
  13. Started by sbarton22,

    I'm looking to finish up my last big Xmas present. I probably can't put the finish on until tomorrow at best. With that said, I'm thinking of putting on a wipe on poly, I have never tried general finishes WOP. I tried the minwax WOP, and felt like it took forever to dry, especially the first few coats. So, I'd like to know if anyone has any tips on: 1) Is the General finishes product better? 2) Tips so that I can lay down enough layers to build a shine in a few days? 3) Just WOP tips in general...light buffing w/ steel wool between coats? Ideas like that. Thanks in advance!

    • 7 replies
    • 13.1k views
  14. Started by danbell78,

    Does anyone have any experience using dyes instead of normal stains? I was considering using some dye on a project that I am trying to get a nice dark brown color out of red oak. (Had I planned this color when starting I would have used Walnut or something darker to start with). I have tried stains but struggled with getting the color as deep as I wanted. Has anyone sprayed dyes, either just mixed with water or mixed in with the water based poly? I have used a dye before, to get a nice deep red on maple, and was happy with the results with just wiping it on. That was before I got the spray system, so now I would like to try it via spray. Thanks

    • 5 replies
    • 3k views
  15. Started by jsollows,

    I am a hobbiest woodworker and I'm considering purchase of an Earlex. I'm hestating because I do not have space for a dedicated spray booth. I also live on Canada's west coast where it rains 11 months of the year (at least it seems that way). Suffice it to say that spraying outdoors is pretty much impossible except perhaps in July and August. I have visions of all my hand tools and power tools in the small garage shop, covered in a fine mist of paint. Is that a legitimate concern with the Earlex and is there anything I can do to prevent it?

    • 12 replies
    • 4.9k views
  16. Started by mitch13,

    I have recently bought some Leopardwood (Roupala spp. (R. brasiliense,)) for a clock project I plan to start in the new year. Having made my purchase I then saw a sample of the timber finished with an oil product (I don’t know what) that made it look like mud. It was the striking appearance of the timber that made me chose it so I would be upset if it ended up looking awful due to the wrong finish being used. I had a look in understanding Wood Finishing by Flexner but it is not covered does any one know of a book or magazine article that covers Leopardwood as I am always happy to extend my woodworking library. I have never used Leopardwood before so any…

    • 3 replies
    • 7.7k views
  17. Started by jhl.verona,

    Everything had been going well, I'd brushed five coats onto the plate holders. Gave them all (plus the four candle holders) another coat this morning, and this is the result after lunch... What changed? Same brush, same shellac (1 lb cut), same idiot applying the stuff, but while the temperature is still mild (about 13°C) it rained all day. All the pieces have the same problem. I believe this is called blushing due to the humidity. What I need to know is what is the cure? I've read that a wipe over with denatured alcohol should do it - is this correct? I can't bare the thought of sanding off the finish on all those pieces... John P.S: Yes I do have my…

  18. Started by Andrew Rice,

    So I've been making tree top tables. There is one with two splits in the wood that are maybe 1/8" wide at the widest part. I don't have a problem with it since I'm only using this table to play chess and drink coffee on. I would like to prevent the cracks from getting bigger though and want to stabilize them. I've made a few tree top tables before and I've fixed one with a split once. I remember when I was a kid there were these wave shaped tacks that you'd hammer into the split and they'd prevent it from widening. I have no idea what these are called since I used the last of them. Any help?

    • 10 replies
    • 13.2k views
  19. Started by Benvolio,

    So I was wondering, if a sealer coat really does seal the wood - how comes the wood still moves with moisture changes during the year?? I mean, if the wood is sealed, how is the internal moisture affected? Just a thought.... Ben

  20. Started by CJC5151,

    I have been hired to build shelves to hold nail polish. The lady has seven nail salons in the city. Great gig and i really want the job But i dont think I can meet her requirements. The problem is in the finish. She wants a high gloss finish thant the can clean any accidental spills with acetone and not affect the finish. Is that possible. acetone will take off any finish i would put on, i think. Any suggestions, I really need the job. Thanks guys

  21. Started by dmwechs,

    This is my first attempt at inlay using the router. Of course i picked a pretty tricky(aka small) pattern to inlay. This is going to be a picture frame with the Chinese characters for Happiness. This isn't the final product, simply a prototype and practice piece for me to get the technique down. Its walnut with a maple inlay. My question, would i be able to use the grain filling strategy that Marc described in his refinishing video? danish oil and then sand? would doing that now with the maple already inlaid also stain the maple? Anyhow thanks guys...

  22. Started by rpike,

    So I'm about ready to finish my 6'x10' cherry bookcase. I think I've come up with what I'd like to use for the finish and wanted some of your thoughts. I've only finished using oil and wax in the past, so this is my first "complex" finish schedule. This is what I'm thinking: 1.) wash coat with Bullseye 2.) shellac with Honey Amber transtint to tame the reds in the cherry. 3.) shellac seal coat 4.) burnt umber glaze to eventuate the browns 5.) lacquer topcoat. I was considering building up a blonde shellac top coat, but would like the durability of lacquer. Also, can I use water based lacquer as a top coat or s solvent based lacquer recommended? To add to the…

    • 5 replies
    • 3.9k views
  23. Started by COMO,

    I am relatively new to woodworking and last minute decided to make a cutting board for my mother in law as well as mother for Christmas. I watched the video here and he talked about a salad bowl finish. I like the durability of this finish idea because I dont see either lady keeping up with the mineral oil but when i read on rockler it said not to use this finish on butcher blocks. I was wondering why this is and would a mineral oil finish hold up with out it being touched up every month or two. Luckily we are not headed to MO until January so I have plenty of time to finish the boards. I am just trying to decide what finish would be best? Thanks COMO

    • 4 replies
    • 3.2k views
  24. Started by Jerry S,

    Wondering if the communiuty could shed some light on a finishing "issue" I am experiencing. I have built a "train set" for my 2 year old son. (It's the Puzzle Train from "Making Toys That Teach", love that book…) Anyway, I was thinking of using Danish Oil for the finish. It the past when I have tried Danish Oil it would only let me do like 1 coat…the second coat would feel like it would never dry, or really soak in much…it ends up a little blochy. We are talking days and it is still weird. Any ideas as to what I may be doing wrong? My usual “go to” is GF Arm-r-Seal. And with that stuff I usually put 3 -6 coats. Never had any issues. I suppose I could use it o…

      • Like
    • 25 replies
    • 27.3k views
  25. Started by Jerry B,

    Need some help and options. This is the first time I have use shellac and thus far, I have failed to achieve the results I want. I tried to rub out the finish, using a pad with shellac, little bit of denatured alcohol, resulting in what looks like the complete removal of the shellac. Thinking that I used too much alcohol I made a new pad. I put shellac and just a touch of alcohol with about the same result. This was on a test piece. The actual pieces have 3 coats of shellac that was applied using cloth (no pad). You can see lines similar to brush strokes. Can I wet sand the shellac with 1500-2000 grit to level the finish and achieve a high gloss? Options?…

    • 2 replies
    • 3k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.