Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by Jesse,

    What would you guys say are the quickest and easiest finishing options? I've been pretty happy with mineral oil, but I'm becoming more interested in stains as well, say, to make poplar, maple or birch look like dark mahogany or walnut? What are the laziest most efficient methods you know of? More to the point, I would like to stain these cabinets tomorrow and be done with them: Thanks!

    • 11 replies
    • 4.4k views
  2. Started by Jim Heinbuch,

    I completed one project last night and one many months ago. Today was the day to finish them. OK, I'll admit it I painted them. I got the primer, thinned it and completely sprayed both pieces. I went to clean up everything & something wasn't right. The paint globbed up in the water. Quick rush to the garage confirmed my worst suspicion. I thinned an oil based pain with-- wait for it -- water. Boy, do I feel like a ???? I was wondering why it wasn't looking quite right but I was using old plywood that wasn't sanded because the projects were only for the shop. What do I do to paint tomorrow? Do I have to do anything special on the new paint or just make sure I…

  3. Started by Indy Cindy,

    I am intrigued by some of the results I see using dyes, but I am concerned by comments about their lack of light fastness. Can the choice of top coat prevent the dyes from fading? What about using a combination of a dye followed by a stain then a top coat? Will that be any more light fast? Since furniture and other wood projects last a life time, I'd hate to see the color just fade away.

  4. Started by Billiam,

    Is anyone here using Mirka 5" disc sandpaper? I'm seeing good reviews on other sites and just thought I would ask here.

    • 6 replies
    • 5.6k views
  5. I just have a few of questions that I can't seem to find a proper answer on regarding Mylands Friction Polish.... Do I need to use the sanding sealer or is sanding to 600+ good enough? Once you get some heat going and it get a nice shine (working on the lathe, obviously), am I done? Do I need to let it dry? Do I want to apply multiple coats? Is this a sturdy finish? Is this something one might want to apply on top of a CA + BLO finish? Next, I have been reading about using the Bealle buffing system after the polish. What is the point of this? I have also read to apply Renaissance Wax. I like the renaissance way for it's fingerprint resistance. …

    • 3 replies
    • 5.7k views
  6. Started by Juicegoose,

    In building my entertainment center I came into my first "oh i didn't expect that moment". The case will be painted so i bought some cheap redoak for the face frame. I was attempting to prefinish the frame and used a coat of sealcoat thinking that would seal everything up. Two coats of paint later the wood grain is still visible. What pore filler would be good to use on a larger frame like this? I can't use the timbermate as it would take at least 2 bottles. Also would the pore filler have a problem adhering to the wood with finish on there already? Thanks guys

    • 6 replies
    • 2.9k views
  7. Started by dhranger,

    What process should I use in order to finish African Padauk cabinetry which will enable me to retain its orange color, rather than just allowing it to change its hue to brown..??

    • 4 replies
    • 5.7k views
  8. Started by stephwood,

    Hello -- looked around in here, couldn't find that this has been discussed. Bought my first "oderless" mineral spirits. Thinking that the milky appearance might indicate something wrong, checked it out on the internet. Apparently, this is normal for this stuff. However, not sure that I want to use it for diluting varnish, etc -- seems to leave a residue on glass, so what would it do on my wood? Could not find this topic after more 'net search. What is the experience with this out there -- is it truly inter-changeable with regular mineral spirits for thinning, or should I just use it for cleaning? thanks!

    • 6 replies
    • 8.3k views
  9. Hi everyone, I'm not a woodworking expert or even a beginner, but I found this forum when trying to find an answer to my question. We installed a reed fence (thin bamboo type) and we need to waterproof or water seal it, but I have no idea what product to use. We have a lot of square footage to cover, so we need something very cost effective. The fence will get lightly sprayed with our sprinklers 3x a week, so we definitely need something to protect it from water. So far I've found Minwax Helmsman Gloss indoor/outdoor spar urethane. Would this be a good option? How would we apply it? We don't own a sprayer. Would regular wood sealant be better? As you …

  10. Started by Everett,

    Hey All, I have a lot of Ash that i was going to start building a bedroom set (excited to finally do some mortise and tenon). I was going to stain the Ash (i didn't want it quite as light colored as natural Ash). Should I be fine with the slurry method of pore filling if I put on about 2 coats of varnish and let it dry first? I'd rather not use a pore filler if possible. Thanks, Ev

    • 6 replies
    • 3.2k views
  11. Started by trz,

    Anyone use the rockler turbine for spraying poly? Are they worth the money for a hobbiest?

  12. Started by HoboMonk,

    “Did you test the finish before you ruined your project?” Here's a short tongue-in-cheek list of seldom tried solutions for finishing: 1. Read the instructions. Strangely enough, manufacturers are known to print usage instructions for their finishing products right on the label! I know that this sounds counter-intuitive and revolutionary but it's true. Granted, you may need a magnifying glass to read the small print but it's there. 2. Check with the vendor's website. Finishing products vendors like to communicate with their customers. It's good for business. Sometimes you can even email them with a question. Who better to ask. 3. Take a class, watch a vi…

  13. Started by bigwood,

    Quick question: I’ve depleted my supply of paint strainers and hoping to order bulk online to save a few bucks. My old ones are labeled, “Fine” and “Extra Fine”. The ones online are classified in microns. (226, 190, or 125 microns) What do you use? I’m using it to strain oil/water based lacquers, stains and shellac. Any help would be appreciated.

    • 2 replies
    • 3k views
  14. Started by franzxkafka,

    I have side by side Victorian 10' exterior walnut doors with great detail that have weathered. I sanded one door (60, 120, 150 grit) to remove all old finish and to remove greyed out damage. One door remains with old finish and is generally a uniform light color (with greyed out water/sun damage on horizontals and lower area). When I put thinner on sanded door to approximate finish color, it looks really dark and grey, some boards totally different color. I don't think that doors were treated or stained last time. Will the color differences work out in time/sun or how can I adjust? Also, what are your thoughts on Pettit's 1015 Captains varnish. Will that "traditiona…

    • 1 reply
    • 3.9k views
  15. Started by Salvatore,

    Hello, guys. Sorry if this has already been posted or deleted or what have you, I don't have any history of this being posted and I know the site was glitchy recently, so forgive me if this is a double post of what have you. But I was wanting some help, see, I've got some Quina and only 2 finishes to apply. Beeswax which I melt into the surface, or Tung oil. Quina is an oily wood so the tung oil doesn't really work well as one can imagine, and with beeswax I typically take a very low flame lighter and move it around quickly in order to melt the wax. Thing is, I got these blackish bubbles, so I assume the oil in the wood caused that bubbling as a direct respons…

    • 0 replies
    • 4.3k views
  16. Started by rawls,

    My wife's uncle recently gave us a nice coat rack which he got from his father. It is old, probably 80 to 100 years old and I am refinishing it. It turns out that it is made of...mahogany...which is really cool, my first time with mahogany. Problem is there are lots of curves and small parts. I don't want to lose the curves and details, so how do I go about sanding the tiny pieces like the cap and base? Any suggestions?

  17. Started by duckkisser,

    Ok so i came across rub on poly and i was wondering what people thought of it. Is there any issues that have come up when mixing it with other chemicles and dies? Regular poly is kinda thick and drips will show up right away but how thick is the rub on kind? Does the rub on type absorb into the wood? Any advice or thoughts are welcome even if it has nothing to do with my question.

    • 15 replies
    • 9.6k views
  18. Started by sbarton22,

    When finishing with tung oil are there benefits to adding a second finish? I guess I'm thinking that if I use the tung oil to draw out the depth of the wood, would a wipe on poly negate it? Could you get both the depth of wood and a glossy finish that way? What about working in the tung oil and then moving on to a buffing compound? I feel like I am missing some fundamental idea here.

    • 3 replies
    • 3.4k views
  19. Started by linnig,

    What is the best way to finish a new rustic alder exterior door in a medium cherry finish. I live in Phoenix AZ so the heat and sun is a factor. Any suggestions on product, coats etc, greatly appreciated.

    • 3 replies
    • 3.9k views
  20. Started by Juicegoose,

    Guys i'm spraying some GF milk paint and although it seems to be spraying beautifully I've noticed the every so often I'm getting these little bubbles in the paint. Can anyone shed any light as to why this might be happening and possible fixes? My immediate thought is to use some flowtrol to allow the paint more open time to level out and let the bubbles pop. Any help would be appreciated.

    • 4 replies
    • 3.1k views
  21. Started by Jerry_in_SD,

    I got an email from Highland Woodworking and they have an Earlex HV550 Pro on sale for $270. Seems like a good deal. I have been considering adding spraying into my finishing capabilities - especially after completing the finishing on a vary large built-in desktop. I cannot spray lacquer, shellac, etc. as I don't have spray booth capabilities but I hear that water based or water born finishes do OK nowadays. I was wondering if anyone has experience with this model and if this is a good price. Seems to be good based on google searches.

    • 4 replies
    • 4.4k views
  22. Started by rpitcole,

    Well I found a prize at a garage sale, a sofa table wife wants t use in the basement as a wall table. It is finished in a satin reddish tone. Wifey wants it to be black. I do not relish having to strip down to wood to make this happen. Any ideas are welcome. thanks bob

    • 0 replies
    • 3k views
  23. I'm wondering what kind of grain filler or paste filler you guys use for solvent based finishes. In the past I've always made my own when using a waterbased or oil based finish. I'm using a lot of poplar at the moment that's destined for a S-W CAB lacquer finish. Any suggestions on what I could use for leveling out the pores?

    • 2 replies
    • 3.6k views
  24. Started by alindsey,

    I'm finishing a guitar body, made of alder. I've dyed it with Transtint in water and am pretty happy with the results however I would like to add some depth and even the color out a bit more by adding dye to the topcoats, or at least a layer or two. I'm spraying General Finishes pre-cat Urethane. First the sanding sealer, then the urethane itself. So which would you add the dye to: the sanding sealer? The urethane itself? Both, just for funsies?

    • 2 replies
    • 3.4k views
  25. Started by mjgreenwood,

    My wife took me to Restoration Hardware to show me a Salvage Wood Table. Link to table here The product information says that the wood is unfinished and unsealed. It did seem to not have a finish on it but the wood was way to uniform to be random "salvaged wood". Maybe I'm wrong. The wood in the table did feel unfinished yet really smooth (to 320 according to specs)but the color was to uniform so I'm guessing something in the prep. Bleaching or something. Just curious if anyone has some insight on sanding reclaimed wood but keeping the nicks and scrapes. And the other problem was how to ruff up and "age" the cut endgrain to make it match as nicely as the…

    • 5 replies
    • 4.8k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.