Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by armstrdm,

    Hey Guys, I was doing some spraying today and after my finish filmed over, there was a LOT of little fisheye marks. Had no clue what caused it at first, but then remembered I had cleaned the gun about a week ago and used a little CVS brand vaseline on the o-ring that seals the air flow control knob. Now looking back I feel like a complete dumb_ _ _ for doing that! Does anyone know if petoleum jelly has any silicone based ingredients in it? Or anything else that might cause fisheye? Thanks, Dave

  2. I'm in the process of building my wife a buffet style entertainment center. The dimensions are as follows. 73" wide x 30" tall x 20" deep. There are three bays with the center bay being larger for media equipment. I plan on using the general Finishes antique white with a vandyke brown glaze effect and have a couple questions about what you guys would do. My thoughts are to prefinish the insides of the carcass before it's assembled for ease of spraying and no drips. I was going to spray a sealcoat or two, sand it, then spray several coats of the antique white on the inside surfaces finishing up with a clearcoat. How far would you guys go on the prefinish par…

    • 6 replies
    • 3.2k views
  3. Started by Bobby Slack,

    This is a paint grade question. I have a fireplace with lots of different colors and I have to find compliment colors to match or compliment what I have. Somebody told me there is a tool online for this. Do you know where can I find it? THanks. I need help ... helping my wife making a decision on the trim.

    • 2 replies
    • 2.9k views
  4. Started by abowers,

    Hello All, I have a dining table with a mahogany veneer, I used a paste wood filler and filled the grain and let it dry for a few weeks. It felt smooth to the touch. I put a couple coats of shellac and then a few coats of lacquer. Now it seems if I didn't put any filler in at all, the finish seems to undulate with the grain. I was hoping to bring the sheen up to a high gloss but am afraid now that it won't be possible, is there an easy fix? Thanks, Aaron

  5. Started by DaBear,

    Some questions regarding tung oil's drying properties.. Some background: I've used BLO on a few projects, and feel 'reasonably' comfortable with its basic properties. Of late, I've tried using 'pure' Tung oil from Lee Valley, as I'm looking for something food-safe. My questions are around drying time. How long should it be? I found that even after a week, it didn't seem completely dry. Also, the rags don't seem to dry either. I was expecting them to be like plastic (as with BLO) after a couple days.. Note they were laid flat, or hung in the open to dry.. Neither seemed to make a difference.. The viscosity of the oil was thicker than motor oil, thinner than mo…

    • 4 replies
    • 3.8k views
  6. Started by iamwelty2,

    I am finally at the point I'm ready to finish a bathroom vanity, shelf unit and clothes hamper that I've made out of oak. I am using Sherwin Williams vinyl sealer T67F3 catalyzed and SW Pre-cat T77F37 Medium Rubbed Lacquer. I finish sanded a test piece with 240 grit. Sprayed two medium coats of the sealer, sanded with 380 grit and then applied two medium coats of the unthinned lacquer... The piece looks great, but way to shiney for the wife!! I used a Binks 2001 siphon feed gun, 55 lbs air pressure seemed to spray the best... approx. 8" from the piece, temperature was in the 80's. (I'll probably switch to my HVLP gun when I do the actual pieces.) I am a former autobody gu…

    • 5 replies
    • 18.7k views
  7. Started by Alain,

    I built a prototype of a kitchen cabinet in pine and cedar before building it in mahogany. I finished it whith my dad's old lacquer. After a week or so white powder appeared on the cabinet I washed it and it came back again. I dont know yet if it will come back a third time? FYI the lacquer was 20 years old but the can had never been opened. It was an industrial grade CIL lacquer (my dad used to refinish antiques). Hopefully I did'nt used it on my mahogany. Anyone might have a clue on why this happened? Thanks a lot Alain

  8. Started by Siege,

    Hi all, I've almost finished sanding my 80-year old quarter sawn (red?) oak floors, and I'm trying to sort through advice regarding finishing. Based on local hardware store input I would first apply Minwax wood conditioner, then potentially a stain, then polyurethane. I've read that wood conditioners open the grain so the stain/poly is absorbed evenly, but I've also seen a recommendation (Jeff Jewitt's Mission Oak Finish page regarding quarter sawn wood) for stain being applied first, then General Finish SealaCell Sealer - the name implying that sealing rather than opening the grain is what's accomplished - then gel stain, then a final sealer. In my case I want to …

    • 0 replies
    • 3.2k views
  9. Started by kchaya,

    June 27, 2011 - 8:18 pm Reply We are trying to stain a maple bar counter in our restaurant to have a weathered, gray look. Does anyone know how we can do that? It was stained a cherry color, so we sanded off the stain to the original light colored wood. We will also have to protect it from all the wiping and spilling that happens on restaurant counters, but we still want it to have that natural weathered gray look. Any advice? I asked the woodwhisperer and he said that there is a two part clear solution that chemically reacts with wood to make it gray. Any body know what the name is or have any other suggestions? Thanks!

    • 0 replies
    • 4.3k views
  10. Started by ShawnR,

    I just purchased 3/4" rustic maple flooring which was finished with a clear aluminum oxide finish. I also bought some unfinished flush floor vents. I'm hoping to match the floor and vents. Does anyone have a recommendation on what finish would be comparable? Would a polyurethane work? Would I have to worry about the finish yellowing? Thanks!

    • 5 replies
    • 5.7k views
  11. Started by agab6601,

    I want to pick some of the people's brains out there on what to use when finishing a piece. I have in the past used cotton rags (old clothes) I cut them in small pieces but end up with fuzzies, so what is the best cloth to use for applying stain, and wipe on finishes? I was told tack or cheese cloth is good, but when I went to the hardware store it seemed a little pricey for what little bit you got in the package. Anyway any thoughts on this are great, since I know finishing a project is very important in the overall process. -Andy

    • 9 replies
    • 66.1k views
  12. Hello all, I am new to the forum and this is my 1st post. I am thinking of buying an HVLP sprayer, the Earlex 5500. I have never used one before and have questions on how soon it should be cleaned. I am thinking of using General Finishes' Enduro var (water-based finish) with the sprayer. The finish says it requires 2-4 hours to dry. So if I'm going to spray multiple coats, am I supposed to clean the gun after each coat? I'm concerned that if I wait 2 hours between coats the finish will dry inside the gun. Thanks! WoodWorkerWannabe

  13. Started by tonywill,

    I made a couple of Adirondack chairs out of cypress. I didn't apply any finish to them. After a couple of months of use they've developed checks and cracks. Two years ago I made the same chairs out of cedar. They've held up well with no splits. Was it a mistake to use cypress? How can I save them? What finish should I use?

    • 6 replies
    • 5.5k views
  14. Started by mlehikoinen,

    I have a customer that thought she had a solid wood coffee table (which she is asking me to refinish) that had been made by her friend's father. I'll admit the same as it was a 2" thick top. It had been painted black before she took ownership, but the bottom was untouched and looked like several boards glued together. Although I'll let her decide if she wants to go forward with the job or not, my question is as follows: She would like the corners altered to have a 2" radius (thinking safety for young heads). With solid wood banding already in place, how would you wrap the corner with banding? I don't have a steam box, so that's out.

    • 8 replies
    • 5.2k views
  15. Started by ulloa_josh,

    I just completed something that's sort of like a handle and I'm depending on the natural texture of the wood to provide "grippiness." I'm probably just going to leave it as raw wood but wondering if it would be better to put some kind of finish on it or let it develop a natural patina from lots of hand contact. Curious to hear some other opinions/ ideas. Thanks!

    • 4 replies
    • 3k views
  16. Started by stephwood,

    Hello -- need to finish a bar top made of 1.5" reclaimed red oak (smooth), three 12" wide boards to be joined by glue and "biscuits" to form a U-shaped bar top. Like samples stained with Minwax Provincial. For finish, considering a coat of Waterlox Original, folowed by a couple coats of Waterlox High Gloss -- this looks like it would provide the non-plastic looking finish that I want, but have the gloss my wife wants. Not crazy about the long dry times and odor (can work in my garage), but it's tolerable. This sound like a good route? If so, couple questions: 1) necessary to use the Waterlox on the board undersides to prevent possible warpage, or is Waterlox not a …

    • 5 replies
    • 9.4k views
  17. Started by suprmnn602,

    Hello all, I am new to woodworking small projects and if you'd ask my dad, he probably laugh if he new what I was trying to do in my home. My wife saw online people varnishing their formica countertops with polyureathane and thought it was a nice beautiful shiney look. Since we cannot afford granite she thought it would be a good idea to try. Well I'm not the most handy guy but I wanted to please my wife, if momma aint happy, aint no one happy, right. So I went to HD to get the supplies. I got 220 grit paper, some water based miniwax, cheese cloth, thinner, and a suitable brush. After I prepared the surface with my light sanding, and thinner wipe down I proceeded to…

    • 2 replies
    • 3.5k views
  18. Started by TerryMcK,

    Hi guys and girls, I was using General Finishes Arm-R-Seal and latex gloves last night on a project I'm finishing. The gloves were some I found on my shelves that I bought a while ago and I'm not sure about their origin suffice to say they are labelled "made from latex ideal for painting and other jobs around the home". I was half way through applying finish and I found that that the glove holding my applicator pad was disintegrating. I stopped and changed gloves and continued. Then I noticed that the new gloves seemed to be blistering. I normally use "surgical" gloves of unknown brand and material but have run out hence using the latex ones. The finish on the projec…

  19. Started by Bunnyblaster,

    I'm working on my sons baby bed, and I've started finishing it. I'm applying layers of Watco Danish oil, and it looks awesome when the oil is wet, and pretty dull when it dries. I'm at 3 coats now and I've wet sanded with 400 and 800 on the last two coats. How do I get that "wet" look, or more a semi-gloss "wet" look? Should I let it dry and top coat it with a poly or varnish? Any thoughts? This is my first furniture project. The purpose of the finish is to make it look like a gunstock (the bed is designed around several John Browning gun designs). Heres a shot of the bed when I mocked it up to make sure everything fit before finishing. Its missing the metal …

    • 18 replies
    • 7k views
  20. Started by rmac,

    A question for the folks who use electric sanders. When preparing for a finish, does using a decent ROS give better results somehow than sanding by hand, or is it just less work? Or put another way, if you want a really, really fine finish, do you do your final sanding with a sander or by hand? -- Russ

    • 9 replies
    • 5.4k views
  21. Started by abowers,

    Hi all, I have finished spraying 6 dining chairs with lacquer. I have a lot of dried over spray. After a good dry time, I put on a second coat but am still getting over spray. The complexity of the chairs are great, meaning there is not a single flat surface and spaces between carvings. I attempted to do it in such a manner that would minimize this starting on the inside and finishing in the front and seat. My question is can I polish this out without respraying. It is difficult between having to borrow the neighbors back yard, if the weather and humidity cooperates and dragging the chairs over in the car. I was considering trying to rub out with abralon, or ma…

    • 5 replies
    • 18.4k views
  22. I know the pore filling thing has been beat day in and out so lets do it one more time eh? Im working on a old radius glass display case and need to mend its wounds. There are nail holes, cracks, dings, dents, and some pretty viscous end grain on the top of it. I am going to be staining is a medium brown/amber color and satin poly for top coat for now. The idea of using a gloss keeps haunting me and telling me to do it, but the good side says to not do it because it will be brushed on and I can just see the disaster already. That being said here is the deal, I want the "damage" flush with the surface and cleaned up but obviously it is going to get stained. The top h…

    • 0 replies
    • 3.4k views
  23. Started by ediazf,

    Hi guys, I build some multifunctional entertainment center.. it was nothing big, just a simple project for my room. I had laying some spar varnish so I fugured i use the rest of it for the project. I finished the cabinet just enough to build protection, and on the top I used 5 layers, nice sanded in between coats to get smooth kind of mirror finish (not looking for an absolutely lacquer mirror anyway). It came out beautifully, shiny, red oak colorish... great. Well one day later the finish was solid, I buffed it with some furniture cleaning abrasive cream and worked even better. The night I finally put my tv, my scanner/printer. Well today I lifted my tv to clean the t…

    • 13 replies
    • 10.8k views
  24. Started by FB25869,

    Is there a chart that specifies what the stickout is for different widths of crown moulding?

    • 0 replies
    • 3.2k views
  25. Started by simeond,

    If you have a natural egde with a million minor Peaks and valleys which you WANT to keep, but it's dirty and darkened, how do you sand/clean up for finishing? Suggestions?

    • 2 replies
    • 3.3k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.