Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by JayBear,

    Ok, So Im still a beginner but need serious help before I get discouraged. My fabrication skills are getting better and in that aspect Im satisfied with my progress but when it comes to finish I could rip my hair out. I finished two projects. Nothing fancy, a set of bookcases for my wife's classroom and a small shelf for a coworker. I sanded both of my project to 180 and they looked great. The shelf got painted white and the bookcases I stained with a Minwax product. I'm ashamed to say that both didn't turn out to my expectations and Im sure its something Im doing wrong. The white shelf has brush marks (ever after I re-sanded it twice)and bookcases are stained uneven and …

  2. Started by maxomatic,

    I need to paint a new fireplace surround bright white, but I'm worried about durability (could get banged up by firewood). I've used enamel in the past for a tough white finish, but I want something tougher. Any thoughts?

  3. I have an unfinished chest that I want to stain with trans tint and cover with some poly. However, when trying to get my "recipe" for a combination of amber and orange dye correct I found that my Trans Tint mixture just wouldn't stick onto the 220-grit surface of my test area. This was with 4oz of water and 20 drops of dye. Looking online, I found that Trans Tint manufacturer says this: Now, I'm new to this and I have no idea what type of wood this chest is made from. It's very light. I would guess oak. It was purchased at a unfinished furniture store. So, the first 2 options indicate using some other type of stain. The third option, howeve…

  4. Started by klousiajp@gmail.com,

    I'm wrapping up the construction phase of my sister's wedding present, a walnut wall clock. I was hoping that you guys could provide some insight regarding how to finish it. I can't find it now, but I think I read that shellac will not work as it will end up graying the wood. Is an varnish poly blend a way to go? A couple of other notes, The sides and top/bottom are a nice even grain and color but the back has a bit of light wood running up the side. I'd like to even this out if possible. What about sealing end grain and the bead around the edge of the door and ends? I'm not sure where she will put it, will it gray if it's in the sun? Is there a way to prevent it…

    • 4 replies
    • 3.9k views
  5. Started by duckkisser,

    ok i made a solution that blackens dark wood to almost solid black.( http://www.wwgoa.com/articles/projects/ebonizing-wood/)and i have used baking soda to clean my blades.i was wondering if anyone else knows of any home made do it yourself finishes or solutions? something that you might just pull out of the kitchen cubard?

  6. Started by duckkisser,

    this looked like a great way to get free ebony i cant afford to buy it since its so pricy so im thinking of doing plugs and inserts and what not in this. http://www.wwgoa.com/articles/projects/ebonizing-wood/ let me know if you have done it and what you think.

  7. Started by mtmpenn,

    Hey Everyone, Rubbing out a shellac finish with abralon and was looking for some tips. I tried just hand rubbing with the grain and I was not entirely satisfied. I the finish is very close to flat but there are a few imperfections and it seems that the foam backed abralon is not ideal for getting these imperfections out. So, I am thinking that I will use 600grit wet/dry on a hard block first, then work my way up the abralon grits. For people that use abralon, do you hand sand the high grits or use a random orbit sander? If you hand sand, do you go with the grain at all times or do you change it up? How much pressure do you use on the pad? I noticed som…

  8. After going through about 8 test boards I got the color I want for a desk I'm building. This is my first (allegedly) serious project and is designed more as a learning experience. As long as it uses the laws of physics to keep my computer and books off the floor I'll be happy. That said, I've run into a curious problem with the stains. The process that creates the color I want on the test boards goes like this: sand to 80/120/180, then a sealer of dewaxed shellac (Bullseye Seal Coat), then General Finishes water based Merlot dye stain, lastly General Finishes Georgian Cheery gel stain. On top of that will be several coats of General Finishes Enduro-Var (durability is …

    • 4 replies
    • 8.4k views
  9. Started by Hasselback,

    Hey all. I have recently completed (I had to avoid the term "finished" for reasons that will become obvious) a baby cradle for my sister. I am in the midst of finishing it (see...I told you) using the method demonstrated by Mark in his "Go To Finish" video. I've put on the first coat and am preparing for the second. However, the 6-12 hour drying time has really extended into more like a 24 hour+ drying time. Some factors that may be working against me here are: 1) I'm using ACE brand poly, as it's all I can get without crossing several hundred miles of water. 2) This is the tropics and it is monsoon season. I've cut the poly with mineral spirits 50/50…

  10. Started by ToddGerringer,

    I built a pair of corn hole boards last year and once I had them sanded I painted them with a bright white water based paint with a orange trim around the outside. These boards are just a BC plywood with a 2x4 base. I used them last year for the football season (in and out each saturday not left out in the weather) and when I went to put them back I noticed that the bright white paint that I covered with min-wax poly had turned a shade of yellow. Does anyone have an idea of what I can use to coat the boards so the bags will still slide and that will protect the paint? Oh and that won't turn yellow? P.S. What would be the best way to remove the poly with removing …

  11. Started by ReLMAustin,

    Hi Everyone, I am having a lot of difficulty staining a maple box I built. I am trying to follow the instructions in Marc's video here: http://thewoodwhisperer.com/73-coloring-blotchy-woods/ . I started with a cut of shellac. I couldn't find SealCoat so I had to use straight shellac, but in my latest attempt I cut it 2:1. Then, I have been using a gel stain. You can see from the photos that the outcome is not uniform at all. I put the gel stain on, wait a bit and wipe it off. Hardly any comes back off, and I end up with light and dark patches depending on how uniform it went on. I can get it on more uniformly, though, with just wiping on this pudding-like s…

    • 8 replies
    • 5.1k views
  12. Started by Juicegoose,

    Was thinking General Finishes semi-gloss high performance poly for the finish on my cabinet. Is that the typical sheen used in furniture? I know its a relative question just trying to to get a generalized answer. heheh Thanks guys.

  13. Started by ediazf,

    Again, here I go with finishing questions haha. I am doing my 4th cajon drum and now I want it to look darker so I went and bought the darkest brown I could find. I ended up buying "roble rojizo" Minwax oil based stain. Roble rojizo being Redish Oak. It feels more like dark oak than redish, but anyway, I loved it and bought it. I just couldn't find water based stain, wich is what I see most people use and now, before using it, I wanted to be sure if the oil content on the stain would be a problem with the top coat? I am using really good quality poly varnish. Thanks again, sory for language mistakes ?:^)

  14. Started by abowers,

    Hello folks, I have a dining table top with about 7 coats of NC lacquer. I was going to rub it out, but first level sanded with 400 grit, now I have millions of little white dots embedded into the finish. They appear to be deep in the finish, not on the surface. The piece was very clean before I sprayed and these didn’t appear until after the sanding. Any ideas on how or why this happend and is repairable? If it helps, I let it dry for about a week before sanding. Thanks, Aaron

    • 2 replies
    • 3.2k views
  15. Started by Benvolio,

    Hello all My wife is getting into Decoupage (or something). This involves covering a box or something with bits of paper and sealing and adhering them with PVA. she's thinking about doing a table top, and obviously this will need a protective top-layer. I'm led to believe PVA has a bad reputation for things adhering to it. Does anyone have any suggestions?? Thanks Ben

  16. Started by t3e871,

    I just ordered this unit from Highland woodworking. $319 with the extra needle that was the best deal on the interweb. I was planning on using it for waterbased finishes only, but my guild build chairs are going to be finished with epifanes. I'm sure I can clean the gun but I'm a little anal and was wondering if I should get a seperate gun for water based finishes? If so, are there any places that sells just the gun?

  17. Started by jhl.verona,

    I'm thinking of building a few zen gardens, much like a serving tray, around 375mm x 275mm (say 14 3/4" by 10 3/4"), something like this: Nothing too spectacular, and I'll be using some 'plain jane' wood, pretty light in colour, with hardly any figure - Kotò. What I'd really like to do is experiment with some colours and finish. I'm thinking of using acrylic paints, heavily diluted with water, dark first, sand then lighter colours. Something on the lines of those superb guitar backs. Since there won't be any figure, I won't get the 'classic' rippling of fiddle back woods. So I am toying with the idea of mixing in a little oil to get a smear effect. I'll s…

  18. Started by Bobby Slack,

    This is not fine woodworking but as many of you I am proud of the best outcome possible if I am involved in a project. I am staining my log cabin and I have a bunch of vertical posts that support my wrap around deck and the wrap around deck roof (side note ... having a roofed wrap around deck is fantastic when it rains, I can walk around the cabin just on my socks and is a nice feeling ... I used to camp in my property) ... Continue. So when I applied Sikkens Cetol 1 which is the primer, everything went fine and I made sure I got deep in the cracks of the wood. When I went to my Sikkens Cetol 23 the dripp started to happen, so I go back ... and back ... a…

  19. Started by markv14,

    I am planning to paint over my 20 year old dark stained cabinets using white or a light color. My thought is to scuff sand, spray on BIN pigmented shellac primer and then topcoat with latex or GF Milk paint. I am new to this and any thoughts or comments would be appreciated.

  20. Started by scottie56005,

    I was given a fern table from my grandmother after she passed away. There are black stains on the bottom shelf and a few small ones on the top. She did try to sand out the ones on the bottom at one point, but it now has huge cups and valleys in it now and the stains are still there. I have done some searching and have not been able to find any information on how to get the stains out. Im guessing the only way they will come out is with new wood. The top is in pretty good shape and I would like to keep it as is. The bottom shelf is pretty much shot and I have been leaning towards just replacing it. If anyone knows if this is possible, please share your thoughts. Th…

    • 10 replies
    • 18.2k views
  21. Started by sbarton22,

    Quick question...I have been making some pens. I finished a couple with CA glue and BLO. Then I run them through the Beale system. I learned this last bit from a demo at my local turner's guild. My question stems from my own stupidity of not recording my experiments. I made one pen and let it sit for a couple of hours before I applied Ren wax. That pen looks like a glass finish. I don't think I even used the EEE or white diamond. I've made a couple of pens since and per the demo, after a couple of minutes (usually set up time on my grinder) I go right to buffing. The result is the glass finish is lost, for the most part. Yes, it is shiny. But it is almost like I m…

  22. I posted this in the WTO blog, episode 29 but thought I might get more input here. I recently worked on a couple of projects involving stripping and refinishing a piece of furniture and some hard wood flooring. On both I stripped them down to the bare wood, used some sanding filler (two coats) and finished with a clear water borne poly. 1. The furniture piece was a dresser made from maple. Only the top had the finish worn off so this is the only part that I refinished. Unfortunately when I was done the top was significantly lighter (more natural) than the rest of the piece. The rest of the piece had a yellow tint. From a previous TWW video it would seem that this …

  23. Started by dlamulle,

    Hey Guys, As a favor to a good friend I have decided to build him some kitchen cabinets for his home. I have about 300 bf of sapele in my shed so I plan on using this for his project. This is a "favor" so no money here at all, just the love of woodworking and knowing you did a friend a good turn. Here is the question, I'm using pre-finished maple plywood for the boxes and the Sapele for face- frames, drawers and the frame and panel doors. I will be using solid panels not plywood for the doors. I've only ever used BLO that I let dry 14 days with a few coats of Lacquer when I used Sapele, but I feel I need a lot more protection for kitchen cabinets. I…

    • 2 replies
    • 6.3k views
  24. Started by dizz,

    Hi Guys, long time creeper -1st time poster I'm about to put a finish on these stave drums I built and am open to any and every suggestion there is when it comes to the tiger maple and the surface I am finishing. What I mean when I say surface is the shape of the drum is a cylinder so it's not a flat plane I am working with here. The wood is not bent -it's shaped. I have finished a kit before that I built but that was red oak. Very different wood. Besides, I could have done that set a lot better than I did. I'd like to stain these (or dye) and put a durable high gloss type of top coat on these. Again, if you have an idea that will really make these pop a…

    • 1 reply
    • 2.9k views
  25. Started by sapele steve,

    Hi Folks: So I am going to put together a Guitar either from scratch or via a kit. I have been reading that the common finish would be to use Laquer which is sprayed on & consist of 15 to 20 coats! Well, I don't have a sprayer or any means to be able to use one. So, how would you recommend finishing off this Guitar? I was thinking about applying multiple coats of Danish oil followed by Wipe on Poly. However, I don't know how that would hold up in the long run. Any suggestions would be appreciated especially if anyone has experience doing this. Thanks, Steve

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.