Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by dwacker,

    I spilled / dumped a full qt of GF WB poly on the carpet in the trunk of my car. It rolled and the lid blew off. I sucked most of it out with a shop vac and have kept it wet for few days and keep sucking the water out. This is going real slow. Does anyone know of something that will just break the stuff down that will not destroy or take the color out of the carpet. If I cant get it out its going to cost me a grand to keep the wife happy. Don

    • 0 replies
    • 3k views
  2. Started by rodger.,

    I typically finish all my projects by hand. I rarely stain a project, but of course, do a lot of finish work (mostly poly). I decided that it is time I buy an HVLP system. I will spray almost exclusively water based poly. I looked though a recent magazine (Canadian Woodworking) and they have a review on a few systems (including the Earlex HV5500 mentioned in another thread). Many sprayers (including the Fuji mini-mite 3) offer a choice of siphon or gravity cup. Can anyone offer an opinion on the pros and cons of the cups? I took a finishing course a few years back, and used a Lemmer T55Q, which was nice to work with. It looks like I will need to spend about…

    • 4 replies
    • 3.5k views
  3. Started by DennisL,

    I'm in the middle of building a frame out of red oak for a friend. She said she wants a rustic look, and the oak looks good for that, but I have no idea what sort of finish to use. Any advise would be awesome, and pictures to show her would be even better.

    • 6 replies
    • 3k views
  4. Started by robercik72,

    HI, I have made cutting board from A Cut Above http://thewoodwhispe...-cutting-board/ and it looks OK. It's my first project, I expected much worse, so I'm pleased with it, but it is not near as good looking as on that video. My problem is that at first I have used Salad Bowl finish and it gave me a nice gloss look which I really liked, but after a couple of weeks of heavy use (I use it for everything now) you could see the finish wear off and it looked like it was shedding skin - many bald spots. To fix it I have decided to use this time Butcher Block Oil, but now the wood got much darker, especially maple, and it does not look as nice. Have I done something wrong? Or…

  5. Started by Zignot5,

    Hello I'm a noob to finishing & need some help with planning the finish for a few chairs 1st- is there a finishing reference that list which finishes can go on top of other products? For example what can go over BLO or shellac or etc to add a protective coat? What can't? I'd like to have a list for this. The chairs- I have one chair made of curly oak and one made of curly maple. Both need finishing that is for frequent use, but they will be indoor furniture. I've been told that the oak & maple need to be finished differently because of the pores. I had originally thought of using BLO covered with a protective topcoat. However, I've seen warnings that BLO…

    • 1 reply
    • 2.9k views
  6. Started by Pbmaster11,

    Where do you buy yours? I want more quantity for less $! Right now walmart is what i am at

  7. Started by Jfitz,

    Hi - I built a new assembly outfeed table this weekend and decided to try an oil/varnish mix - 1 part thinner, 1 part BLO, and 1 part GF Arm-R-Seal. The table top is birch ply with hard maple edges. For how many coats can I expect this finish to add/deepen the color? I don't want or need it really dark (I would have used stain for that) but since this is my first time using this finish, I'm unsure how many oil/varnish applications are really worthwhile. I do plan on switching to all varnish (maybe thinned a little for wiping) for the final few coats, for durability.

    • 5 replies
    • 3.2k views
  8. Started by rbbauer00,

    I am building the four-drawer jewelry chest from last month's woodcraft magazine. It seems that a smooth finish would be easier to achieve if I applied it to each individual piece before the glue-up. I am using General Finishes Semigloss water based top coat for this project, but I would love info on this question as it applies to other finishes as well. Does the finish affect the joint strength-should I sand the finish from the joint, or even try to not get finish into the joint?

    • 7 replies
    • 3.3k views
  9. Started by Pbmaster11,

    I want to paint a few things and just purchased rocklers HVLP... I have not opened it up nor read the directions but wanted to get a head start on here.... Any specific directions on spraying oil based paint? Can you spray water based? Thin it? Best brand of paint? Specific application directions or technique of spraying paint out of an HVLP?

    • 2 replies
    • 3.2k views
  10. Started by Nick2cd,

    I would like to wipe on some satin arm-r-seal, let it cure, light sanding with 0000 steel wool and then spray a coat of semi-gloss poly out of an aerosol can (don't have HVLP). will this be okay, or are there problems on the horizon?

      • Like
    • 12 replies
    • 9.4k views
  11. Started by MIKWoodworking,

    I made a pizza tray out of cherry and I am worried if I put a finish on it, there is a chance of explosion in the couple of seconds it is in the oven? I am going to sell these and I am not looking for a law suit.

  12. Started by Jack Medure,

    I am finishing a coffee table, all red oak. I applied two Coates of walnut Danish oil and gave it about 6 days to dry. I applied a top coat today, min wax wipe on Polly, the base and stand is fine but the table top released oil and I mean a lot of oil from the grain? I gave it a wipe with mineral spirits before I applied the top coat. I buffed it with a soft cloth to make sure it was dry before the mineral spirits, no color came up. ???? Thanks on advance

    • 16 replies
    • 34.9k views
  13. Started by benshea,

    I am making a wine rack with old rough boards of white oak, and I don't want to sand it and have a super smooth finish, I want to have a old/rough look to it but I think I need to put some kind of finish on it. what would you guys recomend? And I need to learn more about staining and finishing wood, what videos would help with that? I know this post is kind of lame but I need some help starting out. Thank you

  14. OK, we all know that sanding sealer is nothing more than a thin cut of shellac which a.) does a great job controlling blotchiness and b.) it can serve as a topcoat or even standalone finish all on its own. But what about using it as the name implies? i.e. before sanding. I tried this on a set of panels and made the following observations: It helped in spots of tearout where the router (1/4" roundover) hit a grain reversal and left some nubs sticking up. Having those nubs soaked in hardened shellac made them cut a little cleaner. But it also gummed up the sandpaper like nobody's business.

  15. Started by dtjazz,

    I'm putting together a table (3 x 8 foot) out of Brazilian Walnut. I've looked around a bit but need some help on how to finish it. With the wood having oil in it some methods are out I take it. Suggestions?

    • 4 replies
    • 3.8k views
  16. Started by Jack Medure,

    i been working the finishing a oak table top, ran into a few issues but got most of them worked out. The grain structure of the oak has very large and porous patterns. I have concerns that over time the table will suck in every bit of liquid that comes in contact with it so i would like to fill the pores. It has a base coat of danish oil and about 5 coats of arm-a-seal satin. Can i still fill the pores and what is the best way? Here is a pic of the wood, you can see the pore ponds! Thanks in advance

  17. Started by felice2,

    I recently bought a new (used) house that has had the front door neglected. Its finish is cracking and door is very dry. House is about 15 years old and definitely has had nothing done to it over the last 5 years. I have included a photo from the inside and will update my question with photo from outside once I take possession next week. After watching episode 46 from wood whisperer ( Desert Outdoor Finish 4/15/08) was wondering if anyone had used the Epifane blend on an exterior door in the midwest. The house is in Michigan and the door faces West. The project at this point looks to hand sand the door , restain and put on a top coat for which I was thinking…

  18. Hi all, I am in the process of butchering restoring and modifying an music cabinet from 1959 and I want to know what kind of finish they might have used then - or better yet, what kind of finish now will come closest to replicating it. (See attached photo) Please see the attached photo for an example. The finish has a smooth overcoat look and feel to it, so it isn't something that just penetrates like an oil. But you probably already knew that! The cabinet was in a pretty bad way, and I'm using it as a learning experience, so I'm not really worried about a perfect match at all. Especially given that it was made out of (now deteriorating) plywood, and I'm using ha…

    • 3 replies
    • 3.3k views
  19. Started by Angela,

    I was wondering what the best method would be to fix warped decorative inlays. I have an old mahogany bed that was stored in a barn for about 20 years. Aside from some minor issues with the finish, the only problem is a few of the inlays are warped and slightly pulling off the headboard. I have done a lot of refinishing, but nothing like this. Is this something that I can do? Thanks!

  20. Popular Woodworking's book sales site has Bob Flexner's Finishing 101 book on sale until midnight tonight (January 19, 2011) for $1. I thought other Woodwhisperer folks might want to get this most excellent book while it it is priced so incredibly low. For those who do not know Flexner knows finishing inside and out and he has another book Understanding Wood Finishing which is a very complete tome about everything you wanted to know about finishing and a lot of details you probably don't care to know, its a good book but honestly almost too much detail. Read the Understanding Wood Finishing book if you really want to learn all the minutiae of finishing. The Fi…

  21. I have finished parts of a project made out of birch ply with General Finish Gel Topcoat Urethane. Can I go over the Gel Urethane with Arm-a-Seal to add more protection or is that overkill? Thanks, David

  22. I received a kitchen table that used to be my grandmothers. Now I would like to know what would be the best way to seal this table. I was told that she used tung oil on it every year but it is not been oiled since she pass about 10 years ago. I was also told that the wood could be Teak. I have noticed that there is a water stain from a glass on one of the leaves but I am not to concerned about fixing that. What finish should I use to prevent any further water/food damage that can comes with everyday use by small children. I would also like to preserve the reddish/brown color that the wood currently has.

  23. we have a large outdoor table + benches made from thick rough slabs of unfinished douglas fir set on iron frames. the table has a rustic industrial appearance which I'd like to preserve but its getting very dry and cracked and sometimes leaves splinters when you sit on it. we live in southern california so it takes a daily beating from the sun and dry climate. i've begun sanding it with medium weight sandpaper just to remove splinters and smooth out the rough or jagged spots. now i need advice on how to finish it. based on research I've done Sikkens transparent premium sealant seems like a very good option. i would like to preserve the natural color and prefer a …

    • 5 replies
    • 21.2k views
  24. Started by Jack Medure,

    Can I sand in the danish oil to help fill the pores? I have a solid oak top I'm making a coffe table with, I plan on using wipe on Polly and sanding each coat. But can I do the same with the Danish oil the start filling from the beginning?

  25. Started by Paul-B,

    hello, im still new to wood working and i wanted to find out what would be the cheapest and easiest way to finish cherrywood pipes. Should i use somekind of wax or are there any other ways to make heat resistant finish?

    • 1 reply
    • 2.9k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.