Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by Nick2cd,

    I want a finish that is easy to apply and brings out the woods natural color. A slight amber hue would be ok. So which oil is the best to use for this situation? By the way, this is for a countertop wine rack project and the woods used are walnut and ambrosia maple with some nice spalted areas.

    • 6 replies
    • 5.7k views
  2. Started by jcanelli,

    So i'm in the process of staining a pair of 4 x 8 bookshelf units I made out of maple. The plan is to achieve a nice dark rich mahongany color. I sanded to 220 sprayed trans tint mahongay dye as a base. followed that up with a wipe down of bulls eye shellac cut 50/50 with denatured alcohol. quick sand with 220 applied BAC wiping stain from sherwin williams (library oak)...... Now i'm lost.... I want to apply van dyke brown glaze from GF(water based). I'm not sure how to proceed. I know sherwin williams calls for a vinyl sealer. should I apply it before the glaze or am I ok to move forward with the glaze. I was planning on using a lacquer as my top coat . The plan is…

  3. Started by cronus52,

    I am taking on a project of building a bed for my 4 year old boy. My original thought was to build the bed with a mdf base under the mattress and pine for all other parts, and paint everything. Now I am thinking I want a stained look instead of paint. In order to do this I can use a 3/4 oak or birch plywood and the remaining parts would again be pine (trying to keep it on the cheap side) Is there much of a color difference if I stain 2 different species of wood in the same project? Thanks for any advice I can get Scott

    • 4 replies
    • 10.5k views
  4. Hi everybody. I did some woodworking in high school and have recently put myself to the test by building a jewelery box for my wife for Christmas. It is a Bubinga box with a wenge panel lid and mitered keys. I am getting close to the finishing step. I want it to shine. In high school I always sprayed everything. What would you suggest as an easy to do great finish. Also do people normally finish the inside of a box as well as the outside? Thanks.

    • 3 replies
    • 2.9k views
  5. Started by fitzgibbster,

    I recently resawed and planed a piece of birdseye maple with the intention to not use the portion with the knot. However, after resawing and planing the knot has a beautiful heart shape. I have read a little about reinforcing a knot but most comes before you have planed the piece. I am looking for advice to reinforce the knot and still be able to put a finish over it. Thanks.

      • Like
    • 1 reply
    • 3.3k views
  6. Started by jtooley75,

    Hey guys, I recently saw a neat project in a woodworking store that had crushed turqouise inlayed into the wood. It seemed like a clear epoxy of some sort was used to keep the turquoise in the groove or crack of the wood. I'm newer to woodworking and never have seen this before. It looked real cool to me. What kind of epoxy is used for this? Is it even epoxy that is being used?

    • 3 replies
    • 3.3k views
  7. Started by haroy,

    I've used Citristrip Stripping Gel on a dresser, bureau, 13 draws, & wood around a mirror. The pieces are all wood, the top layer being a veneer. The finish, from the mid-1950's, I stripped was a high-gloss shellac or poly - whatever may have been used in the 1950's w/a whitish/light gray stain under the gloss. The Citristrip was left on from approx 20 min's up to, @ times on some pieces, approx 1+ hr's; no more than 2-3 hr's max; most pieces in the 20 min-1 hr range. Many of the pieces now have lighter spotting on the bare wood, areas where I had to use a 2nd application of Citristrip because these areas didn't completely strip the 1st time around. I cleaned the…

    • 14 replies
    • 16.8k views
  8. Started by askanes,

    Hi Marc, When you made the picture frame for Nicole a couple of years ago what colour dye did you use in the shellac? I'm trying to do the same thing for a box top but my test boards never seem to look as good. I've watched that video several times now and I don't think I'm doing anything any different except guessing at the colour of the dye. Thanks, André

  9. Started by 3djedi,

    I have a final coat of glossy latex on top of mdf that is a little rough and has some dust nibs. Can I sand it without ruining the gloss? What grit should I go with? Thanks!

  10. Hey guys, Over the Thanksgiving holiday I drove home and brought back with me my father's old desk. It's badly in need of a full restoration, both glue joints drying up (easy enough to fix) and full refinishing job to rectify the refinishing job that my father had done years ago. The desk is white oak, with the top, sides and a couple of pull out flats being lesser woods covered in a very nice quartersawn veneer. The problem is that my dad wasn't an experienced refinisher and he refinished it when he got it from my aunt (who'd painted the thing with huge gobs of peach latex). From what I can see the initial veneer was pretty thick (maybe 1/16") looking at …

  11. Started by Jerry B,

    I am currently making 2 shadow boxes, (2 uncles WWII vets) using in part some purple heart. I have searched the internet, which only confused me. Oil based, water based, sunlight etc.. The board has very nice wavy grain and color, which I would like to maintain as long as possible. I was thinking about Deft spray lacquer. Then I read something about oil based finish diminishing the color. Also read that not all lacquer is oil based. If I use polyurethane (water based, I think) will that work? Thanks for your help. Jerry

  12. Started by tomar012,

    Hello - I built a serving table in a woodworking class I took but I don't know what to use as a finish. What type of finish do you recommend to make it water resistant and food safe? Thanks!

    • 4 replies
    • 3.9k views
  13. Started by nateswoodworks,

    I had the tote break on my beloved Bedrock plane and before I even got a chance to look at trying to re-glue it I bought an absolutely gorgeous tiger maple bowl blank. I was able to get the parts for making 2 sets of knobs and totes out of about half the turning blank that I got for $12 at Rockler so I think I am doing pretty good. I normally oil my tool handles and buff on several coats of wax but for this I want to give the maple that aged hue with aniline dye and then the oil and wax. My question is should I lay down a shellac barrier after the BLO since it will be handled so much? Or do you have any other suggestions? Figured maple is my weakness and the aged golden c…

  14. Started by rpike,

    Okay all, I just started a cherry bookcase for a client and they have supplied me with a picture of a cherry armoire as an idea for the finish. Does anyone have an idea for a finishing schedule? I'm an oil and shellac guy, so I haven't ventured into many other finishing materials. I'm at a bit of a loss as to how to emulate this finish. Take a look at the picture and let me know what you think. Thanks.

    • 2 replies
    • 3.6k views
  15. I'm making a TV stand. Everything is made out of 3/4" birch plywood except for the top. The stand is going to be professionally painted black with a matte finish. The face frame stiles and rails are the only piece of plywood with edges exposed. What is the best way to fill in the edges for a smooth finish? I don't want to use edge banding because I've made the stiles to sit a bit proud to be planed down flush with the sides. The face frame has not been attached yet, so I do have the option of just tossing it out and making it out of poplar. Thanks!

      • Like
    • 4 replies
    • 6.5k views
  16. Started by 3djedi,

    I'm trying to spray latex paint via hvlp and find that it's too thick. When I try just using a brush I get terrible brush marks even when floetrol is added. I came across an article that recommends adding a water based varnish (polycrylic) to thin the paint for spraying. It adds durability to the paint as well as a shine. Which is great for my application. The article does not state how much to add though. They also said a product called Seal Krete Wet Look works great. Has anyone tried this or have any thoughts about it? Good or bad idea?

  17. Started by duckkisser,

    ok so i came across this article http://www.wwgoa.com...ebonizing-wood/. i put a piece of cherry in a jar of this stuff for a month and when i cut in half the wood had completly soaked up the vinegar and turned the inside black as well. got it drying now i am going to try sanding it to see what it does but i think i have created solid black lumber like gabon ebony. if anyone know what the average price of ebony is by the bf i would be apreciative. kinda thinking it might be nice to get a tub of vinegar and make my own boards then maybe selling on ebay.

  18. Started by Jwest,

    Hello All, I'm in the process of designing a built in cabinet/adjustable shelving unit for a co-worker. They want it white to match the trim work in the house. I'd rather not use the melamine stuff from HD because it seems to sag over time and doesn't appear to be as sturdy. I'd rather use birch plywood or something similar, but I'm not sure about the best way to finish it. Sure, I could just paint it white but will that hold up over time? Do you guys have any recommendations for the best way to give it a white finish that would look like and handle a little surface abuse like melamine, but without using melamine. Thanks for the advice. Jack

  19. How many coats of bullseye sanding sealer do you guys typically put down under a painted project? I'm doing an antique finish on a buffett style piece with a GF milkpaint and glaze effect. I was thinking one coat of the sealer should be plenty but wasn't sure. Also for those that have done this style of finish how many coats of clearcoat did you put in between the milkpaint and the glaze effect. I had planned on the following process. all coats are sprayed(except glaze) 1-2 coats sanding sealer(sanding with 220 between coat) 2-3 coats GF milkpaint(sanind wih 220 between coats) 2 coats gf High performance poly to seal the paint glaze effect 2-4 coats gf high perf …

  20. Started by jimmobley,

    I live in a climate simular to yours (Texas) and have been wondering if I might try spraying outside? I worry about the wind, dust, even small insects etc. Can you give me some do and don'ts before I give it a try. Like temps, wind speed

  21. Started by sbarton22,

    I'm planning on integrating an aluminum pipe in a turning I am doing. Any idea how to finish it?

    • 9 replies
    • 3.5k views
  22. Started by chicks82,

    So a customer has asked that i refinish an exterior bench. Well just the wooden slats. Now i was going to use a standard oil base stain to match the old color and they seal with shellac. For the top coat i was thinking of GF Enduro-Var. The question I have will this last out in the sun? If not what other suggestions do you have?

    • 6 replies
    • 7.9k views
  23. Started by smoothjazz077,

    I normally use Mineral Oil on my cutting boards, however after seeing Marc's podcast on cutting boards, I was going to start adding beeswax to the mineral oil. I see that Rockler sells a Butcher Block Conditioner, that includes Beeswax and carnauba oil. Has anyone used this before? and how were the results. Thanks Scott

  24. Started by IronWood,

    I recently finished a dresser/changing table for my new son's room and sealed the top with about 10 coats of Shellac (I'm a sucker for the super glossy look) but when I started putting items on it, they left a mark! At first I thought it was because they were too heavy (lamps) but then a small foam pad for changing left the same "ripples". Have any of you had this happen or know what could have caused it? I let each coat cure at least 2-4 hours (some coats longer) and the final coat didn't see use for 2 weeks. Are the coats too thick? Not cured enough? It's sad because I loved the ease of application but won't use Shellac anymore because of the final result, I…

  25. Started by jscottwoodwork,

    I would greatly appreciate any help here... I recently built a maple bar top for a customer. The top is stained. I then applied two coats of shellac followed by two coats of waterlox. Before applying the final coat of waterlox I lightly sanded with 600 grit paper. After the final coat the scratch marks stand out like a sore thumb. The finish is still tacky.... What caused this and what are my options to fix this?? Thanks in advance!! Jerry

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.