Finishing
2,922 topics in this forum
-
Hey guys, I hope everyone is all set for the weekend. I recently purchased an unfinished maple train table for my son's birthday (he is turning 2 and loves Thomas). We wanted to purchase it unfinished so we could stain it to match our living room (dark wood everywhere). I am very new to the woodworking world, so I have been doing a lot of research on how to darken this wood without any problems. I was planning on going with the process outlined by Marc in his coloring blotchy wood video. I was going to go with a shellac sealer first, then a general finishes gel stain, and I am trying to figure out what the best top coat would be. I would like to go with a water…
-
- 13 replies
- 4.3k views
-
-
What are peoples' opinions regarding the best sealant/finish for new teak that will be used and stored outdoors. My wife doesn't like the silver look that occurs over time and honestly, like any other unprotected wood, teak eventually gets porous and cracks. I was thinking of using penofin. Suggestions? -Al
-
- 4 replies
- 2.9k views
-
-
I'm thinking about starting a large sculpture (6'x4'x4') whose form will be constructed by laminating quite a bit of wood and (power) carving to the final form. Unless I can think of another way to make these forms, I am seeing quite a bit of waste in my future. Now, with that said, I can't justify the high cost of a real hard wood for 70+% waste, which ultimately might just be an experiment. So, my bright idea is to just laminate studs together to get my mass. Ok, problem solved. New problem...studs are sooooo soft. What kind of finish could a fella put on to give it some strength and durability? Would a penetrating oil help and then some kind of poly?
-
-
- 6 replies
- 2.9k views
-
-
Hello to everyone, Im currently getting a custom guitar made. I would really like to know on how to create this type of finish. I hope that you can help me with this. Thanks to everyone. Here is the link to the guitar. -
-
- 5 replies
- 2.8k views
-
-
Marc, Just finished some Christmas trays similar to Halloween tray from Eagle America. I would like a fairly glossy, long lasting finish. What is the best way to finish: 1. If food will be served in trays...i.e. food contacting the wood 2. If no food will contact wood....i.e. wrapped candy, etc. Thanks. You have the best woodworking site on the web! Jeff F
-
- 2 replies
- 2.9k views
-
-
The attached photo is one I made in the old courthouse in St. Louis. They have this wood everywhere in the building - I assumed it was oak because of these cool looking flecks but I'm no expert. If it is oak, then how do you finish it so that it looks this awesome? The building is very old - the Dred Scott case (pre-civil war) was held here so that's how old it is. So how do you suppose it was finished?
-
- 5 replies
- 2.9k views
-
-
Has anyone ever used this brand? Any words of wisdom?
-
- 5 replies
- 3.1k views
-
-
I've been lurking here for a bit and gathering up all the great advice you have to offer for a project I'm starting on. I recently bought a large slab of black walnut to make into a dining room table. Here are some of my plans, but I'm open to ideas. I'm going to leave the live edges as is. Keep the center crack unchanged. Fill the voids on the left edge with clear epoxy. Trim the lower left hand end. I would also like to use a grain filler - Crystalac so that I can get a clear mirror like finish. Coat the whole thing with Waterlux Original. I really want a finish where we don't see the grain coming through and one that heightens the natural color and curl / marble of …
-
- 1 reply
- 3.2k views
-
-
First, thank you Marc. I am a total newb to fine woodworking, and I have learned more from your videos than all of the books and periodicals combined. I have built Master Norm's router table, although my drawers don't look as nice as his, and a workbench. Figured starting with shop tables would help me gain some needed experience, and boy have I learned a lot!! I need to finish the workbench, which is just dimensional spf, but it sure looks nice after running the boards through the planer and squaring them perfectly with a quality rip blade. I like the starkness of the whiter wood, and want to keep that, but obviously add a layer of protection. I already have Minwa…
-
- 1 reply
- 6.5k views
-
-
I think I might have messed this one up. I got in a little of a hurry when spraying water based poly floor finish on some stair treads I am working on. It seems that the finish is still a little soft, scrathes with a finger nail, and it has been 2 days. I sprayed (with my Earlex 5500) 4 light coats with about 45 minutes between coats, enough that it was dry to the touch. Do you think it will harden more if I leave it cure for a couple more days? I am using Varathane's waterbased floor finish. Seems like my test board are harder, but not sure if that is due to cure time or different finishin schedule (did just 2 coats with 8 hours between coats). Any thought or recc…
-
- 5 replies
- 3k views
-
-
I have built a cherry bathroom cabinet that is a cherry plywood case with solid cherry face frame and doors. I will be using an oil based stain and then following with one of general finishes top coats, or both. I am unsure as to whether I need to use seal a cell first before the stain, or seal a cell after the stain followed by arm r seal. Or if I can just use the stain and follow with several coats of arm r seal. Thanks for your help with this question.
-
- 2 replies
- 3.8k views
-
-
We got a faux antique wood dining room table made of Oak built in Holland a couple years ago. It had two expansion joints built into the top which swells due to wood shrinkage in the winter to about 3/16 of an inch and then shrinks in the summer to about 1/8. It came with a hard wax in that joint and we dug it out to replace it and now don't know what product to source to replace it. Anybody have an idea what this wax is ? And where to get it? Thanks
-
- 11 replies
- 3.9k views
-
-
What kind of finish would a fella use on this?? Waterlox is my best guess, but this doesn't have a glossy finish. How often do you think one would have to reapply a finish?
-
-
- 10 replies
- 13.4k views
-
-
Several wookworkers have told me it is ok to use a Varnish (oil/resin/solvent) for a basecoat (to give a sense of depth, etc.), and then use a spray lacquer as a top coat (perhaps 2 or 3 coats). That seems risky due to the inherent differences in the two materials. I would think they would not work together. Any insights? Cheers,
-
- 6 replies
- 2.9k views
-
-
I made a coffee table & a hall table about a year ago. I finished them with 3 coats of lacquer and they are already showing signs of wear. Anywhere that a cup is left has white rings in the lacquer. I have heard that a lot of people like Arm-R-Seal as a more durable finish. Do you think there is anything I can do to the tables without completely sanding down to bare wood and refinishing?
-
- 7 replies
- 6.9k views
-
-
I will be producing a number of "Live Edge" Claro Walnut dining tables for sale. So my customers don't have to be too concerned about frequent "maintenance", knowing that all dining tables suffer spills, etc., I'm in search of the right balance between durability and beauty (dont' want to hide the spectacular color and grain). My shop is set up for spraying, as needed. Due to produciton labor issues and space constraints, I can't use a process that takes many steps over a period of many days (too much labor and too much space required). One of the options I'm considering is the Epifanes "Wood Finish Matte" varnish. Being a "spar" varnish (at least I presume it…
-
- 2 replies
- 3.5k views
-
-
Anyone know the differences (pros/cons), if any, between using denatured Alcohol as compared to other solvents (mineral spirits, naptha, etc.) in penetrating stains? Assume the top coat(s) will be sprayed on lacquer. Thanks. Cheers,
-
- 2 replies
- 7k views
-
-
I am currently working on a home improvement project and putting new solid oak stair treads. I am using some water based polyureathane to finish them and since I am prefinishing them I am using my HVLP set up. Things are looking pretty good so far. I noticed that the finish I have has Aluminum Oxide in the finish to increase the scratch resistenace and durability. That got me thinking. Is there any reason I wouldn't want to use this finish on furniture projects, such as table or cabinet tops? If the durability is better and there are not negative impacts I might try it. Thanks
-
- 7 replies
- 3k views
-
-
Hello, I'm making a black walnut end table, and I'm about to be ready to start the assembly process, but I don't know if I should apply the finish before or after the table is put together. I am planing on using an oil finish, sanding it with danish oil to make a slurry and seal the pores. Thanks
-
- 3 replies
- 3k views
-
-
Anyone have experience with Ionix anti static cartridges used to blow off surfaces before finishing? I recently saw advertising for this product. They suggest it for auto and woodworking finish work. I looked for reviews and wanted more input before spending $150 or more. We use water-bourne finishes in a small custom shop with no spray booth so dust is an issue for us.
-
- 9 replies
- 9.1k views
-
-
Hi I have reclaimed an old 1909 single room schoolhouse. Super excited to see her finished. Im at the point where i have to finish my countertops. They are old fir planks that have lots of "character" knots and nail holes. My problem is how do i seal these holes up so as not to collect food bits and water. I do spill a bit, wine mostly, (have to self medicate often as this is my first restoration project), so what would y'all recommend for a top coat?? I would like to keep the colour of the original wood as much as possible. Thanks Trent
-
- 1 reply
- 3k views
-
-
Hi All, I have finished assembling the sides to the dog crate/side table creation my wife asked me to build. I have made it our of red oak. Mostly because I have worked with it before and it wasn't too expensive. I have two questions. 1) How would you finish it? I had build a gate out of red oak as well and used Minwax Polyshades. It turned out OK. I just remember it taking forever for the thing to dry between coats. Usually 2-3 days per coat if not longer. I've watched all of Marc's videos about finishing and bought both the book and the dvd. I'm not super concerned that it matches what I did on the gate, I just want it to look nice. I was thinking just …
-
- 3 replies
- 2.9k views
-
-
I am hoping to get a design from a buddy of mine who is a furniture designer that has some concrete parts to it. It is a bench for exterior use. As far as the wood goes I have no questions on what to finish that with. I do how ever have a question as to if any of you have ever sealed and finished concrete for exterior use? If you have what did you use? How long ago did you do it? How is it holding up?
-
- 0 replies
- 3k views
-
-
Marc, I read your endorsement of epiphanes as your outdoor varnish of choice, and i also watched your video about cutting board finishing. Am i nuts to want to apply the same principle (saturating the wood with progressively less thinned coats of varnish but not building a film) with epiphanes on a cedar deck? The deck has not been built yet, so I will have access to all 6 faces for finishing. Is sealing it all the way around a bad idea? Finally any other wood you would recommend for decking that is still reasonably priced (cedar +\- 50%)? Thanks, Max
-
- 3 replies
- 4k views
-
-
We have been working since January on my son's room. I know it seems like it is taking forever, but we have a 1 1/2 year old daughter and 3 1/2 year old son. So basically weekend and late night warriors. The project is finishing an upstairs crawl space and turning it into a play area. We finished my daughters crawl space in December and have been really pleased with the added space. With my son's room we decided to go a little rustic looking, and actually used HT Oak pallet wood as trim and backing boards. Some of the oak is a cherry oak and some is a lighter golden oak. We then found a nice chuck of solid Mahogany to use as table tops for different play station…
-
- 2 replies
- 2.9k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,009 Total Members
- 3,644 Most Online
-
Joseph b Newest Member ·