Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Shop

  1. Started by ..Kev,

    Well, it's Sunday and my bench was empty. Time to upgrade the sandpaper rack.. Left over BB ply and some Sapele.

      • Like
    • 14 replies
    • 3.4k views
  2. Started by AndremG,

    OK, I've done my homework and searched the forum on the topic, but haven't found exactly what I'm looking for. Also, a caveat on what I'm about to ask is that I know nearly nothing about construction methods and costs. I've just begun designing a carport/shed/workshop space which will serve multi-purpose as my first dedicated shop, storage for lawn and rec gear, and a cover for two cars. My current shop is a 100 sq ft corner of a dark moldy old basement with no walls (half crawl space), low ceilings (6'5 at best) and a thin, cracked, broken up concrete floor. Although I love the craft, I hate my space and consequently don't do much woodworking. Also, the family he…

  3. Started by Southwood,

    I guess if I am going to play here, I should offer up a couple pictures. My shop is small. Like one side of a 2 car garage, small. I like it and it works well for me, for now. First up is my redneck DeWalt track saw. I have a 4 foot and 8 foot version. It actually work well for breaking down sheet goods. Then we have a tower rack, for lack of better words. All my bench mounted tools go here. I have a small cabinet that they sit on. I can just pull one off the rack and place it on the cab. Here is a ring I had to make. More on it later. My miter bench. I can cut 8"3" left and a little over 3' right. The reason I built it this long was for the storage…

      • Like
    • 71 replies
    • 53.5k views
  4. Started by duckkisser,

    I make a lot of projects with what most people would consider scrap. Keep sake boxes, pens, bowls ect.... So I have a large shelf full of small pieces of figured wood, and other useful wood but most of it is small pieces. Every time I go to get a piece off I restack the entire shelf to find a special piece to be the handle of a box or the decorative inlay in the bottom of a bowl. It is geting a little frustrating restocking the shelf for each project so I finally decided that I need to come up with a orginization system. Unfortunately when I looked up scrap orginization I found lots of images of what I consider full size boards. I need some thing for pieces that are …

    • 6 replies
    • 3.8k views
  5. Started by Shane Jimerfield,

    Been mulling over upgrading my dust collection. I've got a Delta 50-760 and I really dislike - no hate - that dust bag. Whenever I turn it on dust fills my shop. Considering a dust deputy and a Wynn filter. Q: can I skip the filter and just vent this thing through the roof? I live out in the country so I don't have to worry about dusting the neighborhood. Also the cyclone should grab the lions share of the particulates. Will there be any problems not having any back pressure? Cheers!

  6. Started by Dewald Swanepoel,

    Greetings folks, I'm glad to have found this forum. It looks like the kind of place I'd enjoy. I will kick my participation off with a question on workbenches. So I'm a real noob. I've done some woodworking over the years but have only recently started acquiring my own tools. And the one, most important tool, that I still don't have is a work bench. I feel it's time to give the patio table a reprieve now and build myself a workbench. Now I don't think I need anything too fancy and while a Roubo style bench would be awesome I think just a basic bench will do for now. But I'd like to run it by some experts first who might be able to point out weaknesses or make …

      • Like
    • 21 replies
    • 8.9k views
  7. Started by Mzdadoc,

    When I built the house I had them extend the 3rd stall the depth of the house, add two windows, a back door and a floor drain. It's messy now but I'm trying to figure out the best placement for all tools. The tablesaw is the only one that will stay there.

    • 6 replies
    • 2.9k views
  8. Started by rodger.,

    Are you guys getting tired of me posting questions about festool? I am interested, perhaps, in a dust extractor from festool. I went online to their website, and poked around the comparison and specs section of the extractors. They all have the same rating for suction (137 CFM) and static lift (96"). Is the only difference their capacity and size then?

      • Like
    • 18 replies
    • 4.7k views
  9. Started by ChetlovesMer,

    Look at this. I remembered seeing an old workbench with a hutch added on top in an antique shop a while back. I thought I'd do a quick search and look what I found at Pottery Barn. Okay, it's no longer available, but if you don't have a use for an old workbench any more, just build a hutch on top of it and sell it. Looks like you can make enough money on it to finance a new workbench. By the way, the one I saw in the antique shop was for sale for $2800 and they wanted around $1300 to add the hutch. The bench was clearly old and actually really used. The hutch was "distressed" to match and sort of did match, but you could tell it was a lot more recent. http://www.…

      • Like
    • 7 replies
    • 3.6k views
  10. Started by Chet,

    I am new to this forum but have been doing wood working for the past 30 years. But I do have a question that may make me sound like a newbie. I am getting ready to build a new work bench actually more of an assembly table and I was wondering what some of you use for the top surface. I have seen a lot of people use hard board/masonite but I wonder how it is to get dried glue off of that. I was thinking of use Formica, I know if you end up with dried glue on that you can hit it with a putty knife and it pops right off. Thanks, Chet

    • 2 replies
    • 8.1k views
  11. Started by rodger.,

    Just moved in a few days ago, and my small shop is loaded with boxes. Starting the task of unboxing, and tool set up. After I get a good idea of my new work flow, I'll have to get some renovations done to bring it up to sniff. Wish me luck!

      • Like
    • 9 replies
    • 3k views
  12. The obvious: Air Filter. Powermatic PM1200. Picked this up last week, and can't believe what a difference it makes. For extra cleanup, my electric leaf blower gets the layer of particulate airborn, and the filter sucks it up. Worth every penny. The not so obvious: The Roomba That's my workshop workhorse. He never complains, doesn't ask for a raise, always happy to clean, and doesn't talk back. No matter how clean I think the floor may be, he manages to seek out dirt and dust. He's even equipped with a HEPA filter. No, I didn't buy this just for the shop, but he spends most of his robolife down there. The not so obvious, yet incredibly obvious solution: Make th…

  13. Started by Jwest,

    Hello All, Haven't posted or checked the site in awhile due to moving and lack of internet. We recently purchased a great place on 6 acres with a 30 x 40 metal shop/barn. I was originally going to build a new shop since we have plenty of space, and use the old one for tractor and yard work type equipment. I recently have decided to just spend money to remodel and fix up the current shop and just build a small out building for the tractor. Sorry for the long intro, I tend to do that without realizing sometimes. Anyhow, I noticed that this shop has a subpanel with two breakers; a breaker for 1 outlet and a breaker for the lights. Yes...that's only one outlet...110. …

      • Like
    • 37 replies
    • 11.5k views
  14. Started by Dnorris1369,

    First of all this might be a lengthy post so thanks in advance for anyone that reads the whole thing. lol I have a 20x30 metal shop. Its one of those metal kits you can buy that bolt together if anyone has seen them. Looks kinda like an aircraft hanger to me. Anyways I dont have any walls (well wood walls that is ) except for the ends and one end has a rollup door and regular door,so really only one wood wall end is what is have. I really dont want to frame the inside up because of the space it will take up. So any suggestions on creating storage on metal walls? Next i have a harbor freight dust collector. I am thinking about walling in a little room on the outsi…

      • Like
    • 5 replies
    • 2.8k views
  15. Started by rodger.,

    Well, I started dismantling the shop tonight, in anticipation of moving. Took all my handplanes apart and cleaned them, then boxed them up. Took down my "tool wall", and boxed up most of my hand tools and hand held power tools. Good thing I stored most of those blow molded tool cases, they came in handy. So, I decided that I would tackle one machine a night to disassemble, clean, and box up. Last night was the router table, and tonight I did the planer. Cleaned all the gunk out, cleaned the rollers, took the pitch of the blades, etc. All clean and ready to reassmeble/use in the new, soon to be, shop. Anyways, all this down time in the shop has really made me…

      • Like
    • 11 replies
    • 3.7k views
  16. Started by Eric.,

    ...for the summer (gotcha) .....unless I buy an AC unit. Not that I'm getting much shop time these days anyway, being swamped with work and all the rest. But I can't stand being out there for more than five minutes and we're just at the very beginning of the three miserable months I wish didn't even exist. I mean why can't we just have like six Octobers in a row instead of the yearly hell on earth? And any of you freaks who say you love this steamy nightmare, just keep your mouths shut about it cuz I'm not in the mood, m'kay? Thanks. I digress... Quick AZ search came up with this one: http://www.amazon.com/SPT-12000-Window-Conditioner-WA-1211S/dp/B004K43I2Y…

      • Like
    • 43 replies
    • 9.5k views
  17. Started by Freddie,

    If you're like me, you probably have a small shop with limited work surfaces. My work bench is small and usually cluttered, and I find myself most times using my table saw top as an extra work surface between cuts. This is a great secondary use, however, small pesky things can have a tendency to fall inside the throat plate of your saw, and cause a dangerous situation later on. Things like pencils, screws and other small hand tools could escape into the saw unnoticed and will remind you the next time you fire up the saw. A safe habit to practice to prevent this is to throw some blue tape over the throat plate openings while you use the saw as a work surface. It may seem s…

      • Like
    • 12 replies
    • 3.2k views
  18. Started by rodger.,

    I am moving to a new, smaller shop, and need some advice on lighting. I read your article from 2013 on TWW, and still need a bit more advice! My new shop will be approximately 12 x 20, and the ceilings are 10'. If I use t8 ballasts with 5000 k lamps, how many should I use? Also, should the ballasts be 2 lamps or 4 lamps? Thanks for your help! Ps - I posted this in the public forum in case other people were wondering about a similar scenario for their own shops.

      • Like
    • 25 replies
    • 8.2k views
  19. Started by Shane Jimerfield,

    today's shop conditions. don't let anyone tell you that it's cooler in Oregon. time for a cold one, and perhaps a dip the in the river.

      • Like
    • 15 replies
    • 3.1k views
  20. Hi all, I am new here and am hoping to improve my woodworking skills. I have recently put up a 10x20 shed/shop that I will use 3/4 of as a place to sniff glue and eat sawdust. I am hoping someone may have some advice on my floor covering options. I have limited selection of tools at this time and most are, or have been, used for home repair and remodeling. But I expect this will expand over the next several months. **i should disclaim I intend to put up a 40x60 shop for both wood working and my need for things that go fast. So this shed/shop is just a step in the direction of something larger in about 18-24 months. I have just purchased 1/4 smooth faced underlayme…

  21. Started by Stogies,

    I took our storage shed 12 x 20 and insulated it put OSB on the walls and ceiling, painted it, put in new lights, added a lean too on it, been building new work tables and getting new tools. Here is the progression pictures. it seems all my pictures are too big.

    • 16 replies
    • 3.3k views
  22. Started by Dnorris1369,

    Hey guys looking some input on dust collection. I gotta get my dust collection under control lol. Does anyone have suggestions on those auto switches to plug tools in and vac comes automatically on. My table saw is 220 v. And everything else I have at this point is 110v. Router table,bandsaw,planer. The dust collector I have on a dedicated 110 circuit close to my table saw outlet. These seem like the cats meow but I don't know the first thing about them. Thanks Sent from my iPad using Tapatalk

      • Like
    • 28 replies
    • 13.4k views
  23. Started by rodger.,

    I know lots of people go epoxy coating, but I think I would like to put a floor down in my new, small, shop to help increase comfort level. I know there are many ways to do this, including delta ms, sleepers and rigid foam, etc. I plan on leaving the garage door in place for obvious reasons. If I finish the floor in any method that elevates it, how do I prevent/allow for the possibility of rainwater getting in under the garage door, and therefor under the new finished floor? Just some particulars in case they are relevant. My garage is a single stall, poured concrete slab on grade. It's in excellent condition, and has a relatively minor slope towards the door (…

      • Like
    • 13 replies
    • 3k views
  24. Hey, all! The short version of this story is that I have moved in to my grandmother's house, which has a two-car garage. I can set up my shop in half the garage, but there are various family members storing things in the garage as well. Part of my cost of rent is to keep storing these things, and my mother made the (reasonable) request that I not do any "sawdust-creating activities" without having a way to isolate my shop from the rest of the garage (and other family member's items) I plan to have my shop set up in the front quadrant of the garage, so that I can have the door open three seasons. I want something that will more or less block off the rest of the garag…

      • Like
    • 17 replies
    • 3.6k views
  25. Started by sdkidaho,

    I recently insulated my shop and put down decking in the attic space to use it for storage. The roof of the shop is just steel as are the exterior walls. The area above in the attic is not insulated so it's just the bare exterior metal up there. The shop is quit well insulated and stays quite comfortable during the heat of the day. The attic however has at times reached over 120 degrees. I don't have any gable end vents or roof vents and am wondering what my best options are. I know I can do either but I'm not really sure how to do the gable end vents without having them off-center and looking weird, and wasn't sure about roof vents for no particular reason. Any s…

    • 5 replies
    • 3.2k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.