The Shop
1,954 topics in this forum
-
Finally building out my shop and would love feedback on the layout I'm thinking about. It's a small by manageable ~250 sq ft, 11x22. Workbench inspired by David Stanton's awesome bench!
-
-
- 4 replies
- 2.9k views
-
-
If your in the market for a K-pax is on sale at Highland woodworking for 1260.00. http://www.highlandwoodworking.com/
-
-
- 18 replies
- 4.2k views
-
-
I finally upgraded my delta 50-760 with a Wynn nano filter. There's a very noticeable increase in air flow - there was dust in the lower unit of my bandsaw I was going to vac out, but when I did a test run with the new filter it all got sucked out.
-
-
- 4 replies
- 3k views
-
-
As I have a relatively small space for a shop(11x20) I was figuring on putting most everything on casters but as the floor isn't the flatest or most level surface I was also thinking about leveling feet. What are peoples ideas about how to best make this work? I have seen some retractable casters for benches and the like and was wondering what people thought was the best method.
-
- 5 replies
- 3.5k views
-
-
I have a 4" dust collector and a bandsaw with a 2.5" port. What I'm doing now is stepping a 4" hose down to a 2.5" hose to plug into the 2.5" port. However, this seems to really severely limit the airflow. I'm now trying to follow the saying "reduce as close to the tool as possible", which to me means to use an adapter to make the 2.5" port into a 4" port, and plug the 4" hose directly into that. Unfortunately, I haven't been able to find such an adapter. How do you guys do this? Thanks, David
-
-
- 19 replies
- 7.5k views
-
-
I'm planing on buying a cabinet table saw ( yaye for me )the only problem is I live at the end of a dead end street. My garage/shop is accessible from the alley it's a narrow alley and has a 90 degree turn so I have strong doubts about a semi delivering to my garage door. Somehow I need to get the table saw moved a block to my home. Does anyone with experience moving large equipment into their shop have any suggestions for how to get it to my garage? I know a flat bed truck can make it since some guy delivered roof tiles right to my garage door and the garbage truck gets around it every week. Will I need to rent a pallet jack or will that be the wrong way to move it…
-
- 21 replies
- 4.1k views
-
-
Seems like there are a lot of ways to store clamps. I've seen some pretty inventive stuff. Mine are all very straight forward. Other than a few hand-screws and some small spring clamps which I keep in a drawer. Here are my clamp racks. Let's see yours.
-
-
- 285 replies
- 44.8k views
-
-
Hi there. I have recently purchased my first house and was able to convince my wife to park outside so i can use the 1 car garage (12' x14') as my shop. I have torn out the existing plaster and have insulated the walls and now it sits, framing exposed. I essentially have a blank slate to work with, but before i proceed i would like to know if there are any regrets that any of you have with regards to your own shops? ie. lighting, dust collection, shop layout, storage cupboards, plywood or drywalls walls, etc. I realize that there will always be tradeoffs but I'm hoping to avoid some pitfalls by learning from others mistakes. I have a table saw with 52" fence, 6" joint…
-
-
- 25 replies
- 7.3k views
-
-
Normally, we don't disassemble the table saw, but we couldn't get the loader on the yard of the next job. This is most of the "portable" stuff. The monster hand truck, that I mentioned on another thread, is under the molder/planer. The wooden box is the dust hood for the miter saw.
-
- 4 replies
- 2.9k views
-
-
So I've started to look hard at putting some logic to the layout of my "shop". Trying to build a space where I can do a bit more than the minimal dabbling that I'm doing now. The attached shots are slightly messier than usual, but as you can see the space isn't utilized very well. The ceiling in the basement is mostly about 78" high, but the ducts/joists drop down under 72", so I'm really hemmed into the space. The area is roughly 12'x14' maybe?, but the furnace and chimney take a chunk out of that. I'm planning on going down there tonight and griding the space off with what I have there now. In the left corner of both photos, there's a large flat file and old draftin…
-
- 14 replies
- 3.6k views
-
-
I was given a very solid case made form solid wood by my son-in-law (he swears I gave it to him (I cannot remember to be honest) which is in rough measurements ... let me see .. about 300mm deep by 1500mm high and wide. The surface is pretty beat up being in the shed for years but all of the joints are sound. What I would like to do is convert it onto a rolling cabinet. My plan is to put a divider down the centre, build some drawers of varying sizes, maybe to incorporate a sand paper storage of some type, then install the drawers using some full extension slides form the local hardware store. I am planning on using 20mm for the base and 19mm for the sides in hard…
-
- 8 replies
- 3.8k views
-
-
Hello All, I am sure that this has been covered a few time but I can't seem to find anything that matches up with what I am wondering. So I turned my two car garage in to a shop, when I say two car garage I mean it you have to back the car on the right in just to be able to open doors. Now my question is I am looking for some sort of dust collection. I have a router in a table, hand held router, table saw, compound sliding miter saw, orbital sanders, jointer, planer, drill press and a table top band saw. I am not sure that I could fit a big dust collector in my shop right now I might be able to find room for a "portable/wall hanging" unit. What are my option? For the …
-
- 10 replies
- 3.6k views
-
-
so those of you with full shops what do you think is better to use for storage. would you rather have the French cleat system for hanging your tools on the walls and inside cabinets on the walls or do you prefer to have your tools in drawers and cabinets that are free standing and act as stands for your power tools?
-
-
- 37 replies
- 6.8k views
-
-
Any of you guys use ply or OSB for shop walls? Need to take down one wall to insulate and vapour Barrier, so I have to opportunity to ditch the drywall and go with something else if I like.
-
-
- 12 replies
- 3.9k views
-
-
I am planning an odd sized workshop (claiming a new attached garage, see: ) and can't seem to wrap my head around a nice way to lay out the recommended 10 x 8' (4 x 4ft T8) lighting strips to achieve a mostly even 100fc of light at the work surface. (100fc may be a bit bright, but I can tell my aging 50year old eyes are needing more and more light, and I'll split the lighting up on to at least a couple switches). This calculation was based on Jack Lindsey's calculations here: http://www.sawmillcreek.org/content.php?146-Lighting-the-Small-Workshop-by-Jack-Lindsey The internal space is long and narrow - 36.5' x 15.5' = 565.75 sqft, 11'9" ceiling. With a two man …
-
-
- 7 replies
- 5k views
-
-
I just got the grizzly 3hp dust collector. I must say. What a joy it is to finaly have one. Since this is my first one. I have several questions. From what I have been reading I should use duct work as large as it is designed for. Well it goes from 7 inch to a y branch that is 4. So should I stay at 4 or got to 7?. When I was goofing around with it. I only had a 2in flex hose. And was seeing how well it worked. Well to my suprise it worked better with the other 2 openings open and not closed off. Will this be the same when I get it hooked up to a duct system?
-
-
- 3 replies
- 3k views
-
-
http://www.rockler.com/new-dust-rightreg-wall-mount-dust-collectorowith 3 projects going on at the same time, all of which are using power tools the whole time, I have decided that I am definitely in need of some sort of dc system. ( and the wife is sick of dust build up on everything) In my 1 car garage sized shop, space is at an absolute premium. Due to the nature of sharing a shop with a garage, a large permanent system is just not feasible. I do not have a problem with having one hose that I trek around to connectors on the machine in use. ( I'm already having to do it with an extension cord) The following tools would get attachments. Delta contractor sa…
-
- 1 reply
- 3k views
-
-
Hi all! This is my first post here at WoodTalk. After reading a lot of discussions and seeing the wealth of experience and good information I was hoping to get some feedback on my planned shop. I have been woodworking on the side for several years but took the plunge last year and started my own business in hopes of making a living on my woodworking. In order to do so, I need to get out of my now extremely small shop and in to a little less small shop. Due to local regulations and insulation need (I live in Sweden) the interior space is 25x18. Yes, I know, bigger is better, but I am not allowed to build bigger. Height is just over 8' at the long walls, and just over 1…
-
-
- 18 replies
- 3.8k views
-
-
I don't own a lot of the green stuff but, was getting tired of having it scattered around the shop. Wanted their cart but, they think those things are made of gold! So, here is my solution.
-
-
- 43 replies
- 10.4k views
-
-
does anyone have a wood stove in their shop? Specifically a barrel style? I'm installing one now because my small natural gas heater just isn't keeping up with my shop. If you have one, what do you think about it? Does it heat up the area well enough?
-
- 10 replies
- 2.9k views
-
-
About 18 months ago my wife and I bought a new house, which meant setting up a new shop. The house was setting up fairly well for a basement shop. Basement was partially finished walls and ceiling, with a small area cut out for a shop. I moved the wall giving myself a little more space, now have 34ft long by 12ft wide. With this somewhat long narrow space all the tools are on casters so that I can rearrange as needed, but can set up to work the table saw, joiner and planner at the same time. Once shop was set up I did a couple projects around the house (porch swing which I shared here previously). Then it was back to shop. I got my hand on a chuck of …
-
- 8 replies
- 3.7k views
-
-
For future upgrades I want to run 10' of pipe past this wye then cap it. Any issues doing this?
-
- 3 replies
- 3k views
-
-
I’ve been contemplating my first “real” woodworking bench for a while now and thought this might be useful to others in my shoes. I’ve read most everything I could online, including the build vs. purchase debates. As a novice, I decided to get myself making sawdust in the shop by spending no more than five hundred dollars or so on either a bench or parts for one I’d build myself, and then perhaps building an even better one one that suited my needs down the road after some years of experience, unless I find my first bench proves up to the job. As my travels were going to take me close to Grizzly’s Muncy, PA. showroom yesterday, I decided to check out their benches in per…
-
-
- 39 replies
- 7.7k views
-
-
I've been following all of these heat-related threads recently and I'm sorry to start a new one, but all the discussion and points I was remembering are spread across them so I didn't know which one to revive. What's the best way to heat a shop (or garage)? It seems like all of the combustion options (kerosene, propane, etc) either make humidity or remove it...neither is particularly good with wood around. I kind of like the infrared heaters since they seem quick and don't blow the air all around and can even change the air quickly via the garage door without losing all the damn heat. For my particular situation, I have electricity and natural gas available (or …
-
-
- 80 replies
- 17.3k views
-
-
After i had finished up the electrical, and putting up sheetrock. I needed some woodworking time. It's time to finish the rest of the shop and get it over with. Build some cabinets, etc. Here we go.... Taped corners, and time to spackle.... I hate spackle more than Eric hates sanding.
-
-
- 43 replies
- 6.4k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·