The Shop
1,954 topics in this forum
-
I have purchased the incredibly good plans for the Paulk Workbench II. I have a buddy who has a large CNC machine so I am interested in talking to anyone who has converted the plans for use on a CNC. Please email me offlist at jamesbreed@gmail.com. Let me be absolutely clear that I have already PAID for the plans so I am NOT trying to pirate Ron's hard work. Thanks, Jim
-
- 0 replies
- 4.5k views
-
-
For some freakish reason my eyes are aging while the rest of me remains youthful.....at least that's my story and I am sticking to it! Anyway, I have a couple cheap desk lights (the adjustable kind with the springs) but I am looking for a higher quality version of that type of light as the cheap ones keep wearing out. Does anyone have a link to an adjustable workbench light they love? Thanks, Jim
-
- 9 replies
- 14.1k views
-
-
I'm gonna be working on a bench suited for woodworking versus my current work bench situation. I'm aiming for a it to be used as an outfeed for my table saw as well. I tossed around the idea of using framed MDF for the top, but not so much a good choice if I'm gonna have holes for dogs, and I want it solid and go 2" thick top. I'm thinking the following: Beech Maple Ash I was also thinking maybe maple for the frame and beech for the top. I can get beech for around $3.00 per bf. The table top will be around 6 feet long and 40 inches deep. Style will also be a modified Roubo style bench. What are your thoughts on bench top materials?
-
-
- 29 replies
- 8.7k views
-
-
I have a 12' × 20' garage. This is my woodshop. It is attached to the house, so one 20' wall is insulated. The back wall (12') and other side wall (20') are not insulated. The front 12' wall is mostly taken up by the non-insulated garage door. The door is about 9-10' wide. The ceiling is mostly uninsulated as well. Typical 12' × 20' one car garage. I live in Northeast Arkansas. Temps range from 100 in a hot summer to single digits on a nice January day. I want to be able to work in the shop year round comfortably. A few things I would like to do: Insulate the shop, including the ceiling insulate or replace garage door, this could include closing off the wall an…
-
- 2 replies
- 3.4k views
-
-
I've built some book shelves and helped my uncle with building his router table cabinet, etc. I've mainly used my Kreg pocket hole jig. However last year I bought the Somerfeld tongue and groove set as well as the raised panel/rail and stile set. I'm going to be building kitchen cabinets for my parents and this gives me a chance to build kitchen quality type stuff in my shop for practice and perfecting my design. I'm thinking of doing the face frame with pocket screws, or possibly mortise and tenon and then do tongue and groove like in Marc Somerfeld's video on YouTube for the boxes behind the face frame. What are your thoughts on cabinet builds?
-
-
- 9 replies
- 3.3k views
-
-
I got this flagged broom for my new shop and it kicks ass! It picks up way more dust and is much faster than my hard bristle broom. It is a heavy broom and you don't have to press down when you use it. It's not a cheap broom, but since sweeping is as fun as sanding, was money well spent. http://www.amazon.com/gp/product/B004P39HQG/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
-
- 1 reply
- 3.1k views
-
-
Hey all I am really new to the craft still Setting up my first shop. any way I was wondering if I build a solar kiln for drying lumber if some way I could harness the extra heat made in that process to heat my shop. I know its a moist heat but I was wondering if there was a way to make like a baffling thing like on my air compressor to compress the water out and then still use the hot air, or just run a dehumidifier. any help would be much appreciated. thanks
-
-
- 2 replies
- 2.9k views
-
-
-
Hello all, If this has been covered, please point me in the right direction. I searched but couldn't find what I was looking for. Does anyone have experience with propane or kerosene as a heat source in their shop? Hopefully next year I'll be able to run has to my shop and use natural gas to hear. Until I can make that happen, I need something to take the chill out of the shop during the winter up in NW Illinois. My shop is an insulated 24 x 16 detached garage (384 sq ft). I don't want to spend much more than $150 for initial purchase (not concerned about refueling costs). I spend some time on the weekends and that's about it so no a ton of use. Are these safe o…
-
-
- 8 replies
- 3.2k views
-
-
Originally, I was going to build a permanent out-feed table that was hooked to my table saw. After watching Marc's video, I decided to make a free standing one like he did. I changed the design in a couple of ways. It is smaller (36"x48") to fit my shop. It has an overhanging lip just in case I need to clamp something to it. It also has a removable panel in the top to access my downdraft table. The yellow metal funnel is a custom piece my dad made for me as he is a sheet metal worker. I am ordering the flip up pulls to make it easier to remove the solid panel today. I am also finishing the downdraft panel as we speak. ***EDIT*** I also forgot to mention somethi…
-
-
- 25 replies
- 10.3k views
-
-
Hi all, After multiple forum posts on the issue, then settling, then getting new information on it, I'm once again dumbfounded on how to run power to my shop. Quickfire stats: Running ~70ft cable direct buried from 200A panel to 100A subpanel in a detached shop (300sqft). No pipes/wires in between the two structures. Using #2 Aluminum, so putting in a 90A (or 100A?) breaker in the panel back up at the house. Interior shop wiring features multiple 120V and 240V circuits. I'm quite future proofed and have wired for the following: dedicated circuit for dust collection, dedicated circuit for air compressor, multiple outlets pigtailed and dotted around just in case - tools…
-
-
- 15 replies
- 7.7k views
-
-
I picked up a grizzly GO441 cyclone off craigslist for $700 this week, and I am pumped to get it in place. The guy partially assembled it, but never used it. I currently have it in three main pieces, the cyclone body and impeller housing, the motor and impeller, and the filter. Unfortunately, I am vertically challenged in my basement shop. I have 85” to the bottom of the joists, 94.5-95” to the bottom of the subfloor. Thankfully, the collection drum can be reduced by 10” by taking off an extender ring. I can also trim a few inches off the flexible hose connecting the drum to the cyclone body. This leaves me with a total height of 94”, which means I need to sneak the motor…
-
-
- 20 replies
- 5.1k views
-
-
I am looking to build a couple more tables and cabinets for the shop. Most likely I'll go grab some 3/4 shop grade plywood for it. I am going to work on another work station and router table and a storage cabinet most likely. For my joints and stuff they will be nothing fancy. Most like rabbit joints for the most part and then dovetails on the smaller stuff. Would an investment in http://www.amazon.com/gp/product/B000NJ7AZG/ref=ox_sc_sfl_title_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER Be something worthwhile? Or is there other ways around to get tight fits with the undersized plywood?
-
-
- 37 replies
- 6.6k views
-
-
Since I'm replacing the table saw, I decided that a proper dust collection is also in order. I've already done a ton of research but it's still no easy choice. My shop is a 2 car garage that I share with 2 cars. I'm not going to give up parking inside because in Calgary we have enough nasty days in the winter & scraping/brushing snow is something that I just hate. Feel free to judge. My grand plan is to build a sound proof room in the basement adjacent to the garage. In that room I'll have the cyclone, air compressor, the central vac for the house plus shelving for some of the less frequently used garage items. That will free up a lot of space & allow…
-
- 7 replies
- 3.4k views
-
-
Hi, This will be my first winter doing woodworking. I'm currently working out of an uninsulated attached garage in central PA. The garage will be largely unheated for the winter unless I'm in it. I know that I need to bring the glue inside so it doesn't freeze. Is there anything else I need to worry about? What about paint or other finishing material or any tools? The garage is fairly dry it just gets cold especially when the kids leave the doors open. Thanks, Statuser
-
-
- 7 replies
- 3k views
-
-
After years of doing work out of small sheds and costco tents i finally built a designated wood shop. Just starting to fill it with tools and getting organized. I am looking at building some upper cabinets above the bench which will help with the clutter. Shane
-
- 15 replies
- 3.6k views
-
-
What does everyone use for casters for shop-built cabinets/tables/stands/etc? What configuration do you normally use (4 swivel vs 2 swivel + 2 rigid)? What size do you use for various situations? Is having the "total lock" ones that lock both rolling and swiveling that important? I've gone down the rabbit hole online and hoping you guys can provide some real world perspective. Thanks in advance.
-
- 21 replies
- 5k views
-
-
I'm rearranging my 2 car garage to be a more efficient use of workshop space. The only thing I need to give a little space to is my yard tools (mower, small rototiller, chainsaw, weedwhacker, shovels, rakes, etc.) I've got a handful of table top tools that I have on my current bench (disc/belt sander, oscillating spindle sander, slow speed grinder, Tormek, miter saw, hollow chisel mortiser) I lack a good woodworking bench, however my current layout doesn't really allow a woodworking bench up against a wall. I am contemplating a woodworking bench with leg vise and tail vise. I would like to design the table to also be the outfeed table to my table saw so that this bench …
-
- 4 replies
- 3.7k views
-
-
I have a 5000 watt heater in my 2 car garage mounted on the ceiling. It's on it's own 30 amp breaker. I keep the thermostat on the unit set to keep my garage around 58-60 degrees throughout the winter. Costs me about 25 bucks more a month to keep my garage warm. I got home from work today and my heater thermostat must have locked or something. I opened my garage door and got blasted by an uncomfortable heat wave. The heater was running and it was hot as could be in there. It was about 35 degrees outside. I looked at my thermometer in the other corner of my garage to see what the temperature was. See the attached picture for the madness. All my tools were hot, the…
-
- 7 replies
- 2.8k views
-
-
I'm building walls in my basement shop with OSB. How did you handle the gaps between the joists with a wall perpendicular to the joists? Thanks, Tim
-
-
- 14 replies
- 3k views
-
-
So, I am planning out some shop storage and I wanted to see what you guys thought about drawers vs shelves. I assume that I will end up with a combination, but what do you prefer to store in cabinets vs drawers. I am trying to over think this so that I don't build a whole bunch of stuff and then immediately regret my decisions. Thanks, Kyle
-
-
- 11 replies
- 3.2k views
-
-
So I ready to start planning the DC network for my Grizzly cyclone. I have a decent idea of what I want to do but also want to make sure I think and cover everything before installing it. I can get 6" spiral pipe for $1.63/ft locally which seems like a really good price plus they also have gates, fittings, etc. The current layout of my shop is below with the DC in the upper right corner. My main line will run along the top wall with a lateral running to the Table Saw/Jointer bunch and Planer/Drum Sander group. Since it's a one-man hobby shop no problem having only one gate open at a time. I plan on running 6" pipe for main and lateral runs. I'll use two 45's for the …
-
- 13 replies
- 3.4k views
-
-
Curious if anybody has one of these? Are they functional? http://www.harborfreight.com/132-Lb-Capacity-Roller-Stand-68898.html?ccdenc=eyJjb2RlIjoiMTU2NTQ3NTAiLCJza3UiOiI2ODg5OCIsImlzIjoiMTEuOTkiLCJwcm9kdWN0X2lkIjoiODczNiJ9&utm_medium=email&utm_campaign=4514a&utm_source=1011&cid=mEmail_s1011_c4514a
-
-
- 21 replies
- 12.7k views
-
-
-
Okay, is this the most brilliant idea of all time, or am I a complete moron? First of all, my shop is heated. But if I'm planning on not doing anything out there for a while I shut the heat off. Usually, and I stress usually, I remember to bring my glues into the house. But inevitably I forget to bring my glue in and the stuff freezes. Okay, so I've got these spaces in and under my miter saw station. Then I thought "Hey, I can put a door on one of those spaces"; then add some insulation, then a thermostat and a light bulb and ta-da; A place to keep my glue from freezing. So, I already had a thermostat from back in the day when my shop was heated electrically.…
-
-
- 53 replies
- 9.2k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,009 Total Members
- 3,644 Most Online
-
Joseph b Newest Member ·