The Shop
1,954 topics in this forum
-
I couldn't let Mike Suiter have all the fun! Morton built this and once the slab is poured I will do all the finishing. I'm hoping to work on this over the winter and be able to move my tools in by early spring. Things left to do- Run conduit for 100A service and in floor outlets Pour Slab Partition off 11 x 23 area for clean room Insulate and finish interior walls and ceiling Run all lighting and electrical circuits Install 2 head ductless heat pump Top soil and landscape
-
-
- 16 replies
- 4k views
-
-
This is nominal conditions of once I get all my yard tools and such out of there. My current layout is horribly inefficient and somewhat limiting without opening the garage door. to joint longer boards. This layout I think makes the most use of the space. Overall size of my shop is 17' 6" x 22' 8" Each tool is in actual measurements from each tool in my shop and measured at the largest amount of space used by it. Since I haven't done any ducting in my shop yet I also think this makes the most sense so I don't have to move my dust collector towards the tool, and the hose will reach each one. Thoughts? Suggestions? On top of the cabinet will be my Tormek, Slow speed Be…
-
-
- 10 replies
- 3.1k views
-
-
Hey Guys are there any opinions on this saw. I have an acquaintance that wants to sell it to me for $225. From the online reviews it looks like a good saw. I need a SCMS as i sold my non-sliding CMS last week. Was going to get a Dewalt SCMS when this opportunity came up. The is in excellent shape with a new Freud blade.
-
- 7 replies
- 10.1k views
-
-
I'm looking for some hearing protection advice... Needs: 25-30 dB noise reduction Over the ear muffs and headband Fit comfortably on a large head Wants: Noise cancellation Bluetooth This willbe for my garage/shop so I'm not worried about meeting industrial certifications, etc. As I mentioned I do have a large head and find that many headphones fit too tight. I also hate in-ear headphones or plugs - I find the pressure gets uncomfortable within 1 minute. I've tried many different kinds and hate them all. I do own Bose Noise Cancelling headphones (over ear model) and find they work great but I'd rather not use them in my shop - hoping for alternative a bit ch…
-
-
- 27 replies
- 6.1k views
-
-
For obvious reasons, I hate the 8 by 4 sheet of pegboard on my shop wall. I can repurpose it for plenty of things, downdraft hand sanding station, shelf pin jig, etc, but...is there any reason to keep hanging things on it? I've read about special pegs that stay put,..but from what I remember they were stupid expensive. The only things I do like are the small shelf holder pegs. So: 1. Rip it down 2. Buy super expensive stay put pegs 3. Or...keep it up and use a super secret shop trick that I don't know about.
-
-
- 17 replies
- 4.1k views
-
-
I was all set building a traditional outfeed table with a few storage shelves underneath until I saw Suiter's Ultimate Tool Stand (UTS). My 11x13 shop was going to have a stationary 11' Mitersaw/Mortiser/Drill Press cabinet along the back wall but after looking at Suiter's UTS I think I'm going to build a double wide UTS as a mobile outside table that can also be used at my planer/miter/router/etc table for long stock. If you haven't seen Suiter's UTS and have a small shop, check it out!! http://suiteronline.com/2005/01/01/ultimate-tool-stand/
-
- 1 reply
- 3k views
-
-
I figured I would post this up since I thought it was pretty cool. I accidentally left my 15 piece snap on Allen wrench set outside overNight and note I've come to find a bunch of rust on it that didn't just wipe off. I decided to throw them in my ammo reloading brass tumbler with walnut shell medium for a bit and DANG, they came out not only rust free but also polished. Since that happened, I have started tumbling a lot of other stuff as well. Brass drawer pulls, sockets that were gummed up, pretty much any metal piece that fits and will be seen. I know not everyone reloads ammo but if you do, give it a try.
-
- 2 replies
- 3k views
-
-
pic is of a router cabinet i built last year, 25"X50" top with a rocker lift. my shop is small (one car garage) and after coming from my previous house that had a 50'X32' shop i had to find a solution to my space problem. that's were all the drawers come from, i had to use that space for storage. the cabinet is oak plywood with solid oak trim and drawer fronts. if anyone has small shop solutions i would love to hear them. as a side note when we bought this house with the one car garage my wife said" can out woodwork in there"? i told her i"ll woodwork in the back seat of the car if i have too! hope you like the pictures
-
-
- 9 replies
- 3.4k views
-
-
Garage is virtually unbearable in the summer heat, love to find a good air conditioning solution. Anyone have any luck with a portable dual hose model? They have some out there rated at 14,000BTU. I could easily vent it straight into the attic. Space is 400sqft, 11ft ceilings, would only run it 6-16 hours a week. Love to hear any thoughts on this, thanks!
-
-
- 46 replies
- 8.4k views
-
-
I've done some re organizing in my garage and pulled my 55"x23 tool cabinet over into my working space along a wall. I'm planning to laminate a bunch of nice 2x4's together to make a solid (3.25ish ") top for a working surface. I would like to add a face vise to the block since my small bench doesn't have one but under mounting isn't really an option since it will sit flat on the tool box. Im considering routing out a rebate on the under side of the block for the hardware and posts. I'll attach the vise body with machine screws counter sunk into the top with nuts on the bottom. Anybody see a problem with that idea? I've never installed a vise before.
-
- 2 replies
- 2.8k views
-
-
When I did my electrical for the shop I wanted to run 100amp originally. I was talked out of it due to never utilizing 100amps at one time. So I wound up with a 60 amp sub panel. I've since upgraded to more 220v machines, and now I wanna get a more powerful dust collection system either 3 or 5 HP. However the 60 amp isn't gonna cut it since a 5HP needs a 30 amp circuit, heater needs a 30 amp circuit and then the tool I'm connected to, plus lights isn't gonna work. I also need another spot in the panel for a 220V breaker. I'm panning on ripping out the 60 amp wire that is there now, open the wall (again!) and put a bigger panel in place. If I remember correctly 100amp…
-
-
- 40 replies
- 10.1k views
-
-
I've just started the process of a new shop. Looks like my budget is gonna be a 30x50. Reason I'm posting is suggestions on things I might not think of that would help. Maybe setups people have used that did or did not work. Electrical suggestions, heating suggestions, dust collection etc.. No idea too small[emoji1]. Oh yea I'm so excited Sent from my iPhone using Tapatalk
-
-
- 9 replies
- 2.9k views
-
-
Felt kinda special when my daughter "gave" me this for Valentine's Day. She's 4 months old haha. It's a really cool idea and will look awesome when I get it hung up today. It's the little things!! [emoji106]
-
-
- 11 replies
- 2.9k views
- 1 follower
-
-
First time poster. Slowly working my way into the world of woodworking. I got interested in it by refinishing furniture for a living for a couple years now (family business). Now we are wanting to add a bit to our business by not only refinishing, but building, some pieces for customers. That being said, I am quickly finding out how little I know about all things wood shop and how to set it up. I've done my research on tool layout in the shop and I feel good about that (good enough to start anyway), but the DC aspect of the shop seems to get more complicated the more I research it. Could someone provide a link, or just briefly educate me, on the basics of DC and how…
-
-
- 25 replies
- 7.2k views
-
-
My shop is the shop that cds built. In my investment to buy my shop I sold my cd collection and guitar pick collection and started hitting craigslist. The center of the shop is a hp Wilton tablesaw and pool table run off . Need a dead flat build surface use an old pool table. Slate top dead flat and glue does not stick to it. Next is my shop made buffing station (made out of an old drill press) and my 1/4 1/2 Dewalt router table with a Jessem Lift Classic drill press with custom Pool ball knobs for my bigger hands Next is a powermatic pin router. When it comes to template based building this thing is amazing . It is like a manual control cnc Bandsaw Bro…
-
-
- 11 replies
- 4.5k views
-
-
As I'm readying to get started building out my shop I'm trying to decide on the type of top I want for my miter/drill/mortiser station. Recommendations? I like Dave Stanton's laminate top but don't know that I really want that. I used 3/4 MDF on my folding assembly table last year but don't think it'll hold up over time. It's going to be 14' long with a simple 2x4 base with drawers added over time. Tempted to do 4/4 red oak just for durability. What is everyone else using? -jason
-
- 3 replies
- 3k views
-
-
I'm looking to set up my 2 car garage as a woodworking shop and trying to figure out what dust collector I should get. I'm in Sarnia, Ontario, Canada but this is a border town so access to the US is certainly a possibility. I think I've read every possible forum topic about dust collection so this is what I THINK I need: At least 1000 CFM HEPA 0.3 micron filtering At least 4" inlet vortex/cyclone pre-filter Remote on/off . Other than that, I'm looking suggestions. I will have either 120/240V available so that's not a concern. I'm hoping to spend less than $1,500 which will hopefully include some good flexible piping about 30' long (I'll up to SCMS, Table…
-
-
- 19 replies
- 7.3k views
-
-
I'm setting up a completely brand new shop in my double car garage and I know that one of the items I want is a good router table. I'm prepared to the spend the money on a good setup and I think I have my choice narrowed down to 2 options. Which would you choose and why? 1) Festool CMS-VL Kit version I am already going to have the MFT/3 so I would could work. I would use my Festool OF 1400 router - router serving dual duty between the table and handheld work. 2) Jessem Mast-R-Lift Excel II Kit from LeeValley (fully loaded to include fence, stand, miter slide, Wixey indicator, etc) - http://www.leevalley.com/en/wood/page.aspx?cat=1,43000,69192&p=69204 for this…
-
-
- 7 replies
- 5.6k views
-
-
My Wife and I have been looking for a home for quite some time. The area we live in was never affected by the 2008 crash and real estate prices keep climbing. One of the reasons we can't find a home is my desire for a shop. The majority of homes to pick from are in housing plans and have very restrictive HOAs. I've seen it written in some covenants and bylaws that you can't even have a dog house as an external structure! So no external structures means either basement shop or garage shop. I'm in a garage shop now, but have to wheel everything out and it's such a PITA. (If only I could get the wife to give up parking in the garage!) Basement shop wouldn't be bad…
-
-
- 26 replies
- 6.7k views
-
-
This is going to be a very dumb question for most. But I have a shop in a room in my basement. It measure 12X12 (144 sq ft) I have a garage that is currently being used for storage that is 10X17 (170 sq ft) If you guys had to choose which room to put your shop in, which would you choose. The problem I am having, is that the basement room already had outlets in it. The garage has 1. I installed 220 in the basement room, and will have to move it to the garage. And the biggest problem is that the garage floor is far from flat. Its heavily sloped towards a drain in the middle of the garage, and I am afraid most of my tools won't sit level. BUT I can desperately…
-
-
- 17 replies
- 4.9k views
-
-
Looking some advice here everyone. Im fixing to upgrade the makeshift harbor freight 4 in pvc dust collection system i have. Im going to order either a grizzly or jet dust collector and want to use 6inch pipe. My question is where is a good place to source 6 in supplies? I see alot of 4 inch stuff everywhere but not a lot of 6inch. I want to do a nice system and get rid of the thrown together system i have. Price is of course always to consider but I really dont wanna buy junk. Also any opinions on dust collectors would be great. My only limits on those are it must be 110v which is not ideal but its what i have to work with thanks
-
-
- 14 replies
- 3.3k views
-
-
Hey all - I need a short length of 6" host to go from a Super Dust Deputy to the barrel underneath. I chose this option because I wanted to directly attach the SDD to my DC unit, but make it easy to remove the barrel underneath. I only have 4" flex hose. Has anyone used any of the flex aluminum ducting, or flex HVAC hose, from Home Depot for anything in their DC system?
-
-
- 4 replies
- 3.5k views
-
-
Hey guys I want to build a outfeed table for my tablesaw and would prefer it to be black. I have looked for black melamine to no avail. I'm not stuck on it but would prefer it. Seems as though around me all there is is white melamine. Menards sells it but not near me and they don't ship. The folks in Canada seems to have a bunch of it...but not here. I will check with HD or Lowes to see if they can special order I suppose.
-
-
- 56 replies
- 14.8k views
-
-
I'm finally getting around to buying a front vise for my new bench. I've been trying to decide between the one offered by Lee Valley ($85.00), which doesn't mention a brand, and the Wood River Large Front Vise, for $99.00, listed in the Woodcraft catalog. Does anyone have either of these and can attest to their quality? I already purchased a LN clamp-on dovetail vise so this will be for general holding where I want something clamped a little lower. The bench already has an end vise.
-
- 9 replies
- 2.9k views
-
-
I have a 3hp grizzley dc. The farthest a tool is away is 15 foot away. I can do ducting all the way to all the tools. But is it realy necessary?
-
- 20 replies
- 3.7k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,009 Total Members
- 3,644 Most Online
-
Joseph b Newest Member ·