Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Shop

  1. Started by labig,

    looking for ideas , on counters and how many ? My walls will be plywood so easy wall usage . Here is a picture of base to work with . adding this rolling tool box to start .

      • Like
    • 193 replies
    • 47.7k views
  2. I have a tail vice I am going to retrofit it is from hnt gordon. http://www.hntgordon.com.au/bench-vices/product/176-aluminium-tail-vice-100mm-incl-one-1-4-high-dog.html My bench top is a solid wood laminated. My question is should I install it in the solid part of the bench or can the cut out cross the glue line in the lamination. I was thinking in the solid wood without cutting the glue line as I thought it may weaken the bench.

      • Like
    • 7 replies
    • 3.5k views
  3. Started by dsaracini,

    Ok; probably kind of a dumb question, but where the heck do you store your table saw crosscut sled? I've been wanting to build one for a while, but I think one of the things that stops me is that I really don't have a place to put it in my small shop when I'm not using it, and I worry that trying to hang it on the wall might cause it to go out of square over time. Seems like it would need to be stored laying down with a piece supporting the middle so it will not sag. I guess this really doesn't have to be limited to crosscut sleds... I guess a miter sled would have the same issues. Any reply will be appreciated, but *each* picture is worth a 1000 words! T…

    • 20 replies
    • 14k views
  4. My wife decided to visit me in the shop this evening. Her question was "simple", "why are you taking the time to put Danish Oil on the trim pieces of your table instead of working on my projects. On that note, why are you putting trim your shop table!?!?!?!?" Me: "Because I care, my dear!" Sent from my iPhone using Tapatalk

      • Like
    • 4 replies
    • 2.9k views
  5. Started by Brendon_t,

    If anybody has a hood for the 22-560 they could part with, please let me know. I'd like to buy it. It's unavailable everywhere and I had it backorder on amazon for 6 months. Well just got a refund because they said they week not be receiving any more. Ever. I've looked all over online and everywhere had it obsolete or discontinued. Thanks

      • Like
    • 9 replies
    • 8.8k views
  6. Started by Jim DaddyO,

    I am not sure exactly what it's original purpose was, but it looks ideal for setting blades on a jointer. Increments are to .001" and the dials turn to zero it out when the 4 feet are on the table. Not sure what the screw on top does, there is a spring under it and I didn't go any further. I got it at a junk shop for $10 CDN. Any clues what the original use was?

    • 2 replies
    • 2.9k views
  7. Started by Janello,

    What is typically more important with shop lighting- Higher Color Temperature or Higher Color Rendering Index? The LED lighting I'm looking at for the new shop seems to give one and take the other. For example; one is 5000k at 67CRI the other option is 4000k at 82CRI. I'm leaning toward the whiter light with less color rendering.....Which would you choose?

      • Like
    • 25 replies
    • 16.4k views
  8. Started by ..Kev,

    Just arrived today.. Wish I had more time to play with it! Oh well, will be here when I get home..

      • Like
    • 13 replies
    • 3.3k views
  9. Started by duckkisser,

    I know nothing about speakers but I want to find something that I can use to listen to music over the machines. I have a pair of speakers with 160 mm subwoofers 2 way speaker system they don't seem to be very loud. Frankly I'm over my head I don't know anything about sound systems if anyone has any pointers I would apreciate the advise.

      • Like
    • 11 replies
    • 3.6k views
  10. Today I was finally able to start making sawdust in the basement shop.... only to find that my current wiring won't cut it. Just running my SawStop and shop vac for dust collection, I was tripping the circuit. I checked the box and the circuits are all 15 amp circuits. While I was able to reset and continue, the circuit sometimes tripped with just the saw running and not cutting anything. Right now, the saw stop is my only power tool, but I expect to add a planer very soon. I'll be hand flattening until next year when I hope to get a planer/jointer combo machine. For dust collection I have a shop vac with a rockler dust vortex. The basement is mostly f…

      • Like
    • 17 replies
    • 4.5k views
  11. Started by elrodk,

    Hi, I'm building a new standalone shop and it turns out because of the grade I will have a raised floor with at least a partial basement. Poor me. Prime storage space. The shop including my wife's stained glass area will be 30x34 with vaulted ceiling. My first concern is the weight of equipment and the second question is about finished flooring. My current tools are not extremely heavy. I have a 13" planer, 6" jointer, 14" bandsaw, 16/32 drum sander, a Craftsman table saw with a cast iron router wing built in. I also have a miter saw, floor model drill press, some table top sanders, and stuff that will sit near a wall. Any of these along with the operator and mate…

      • Like
    • 13 replies
    • 4.8k views
  12. Started by Just Bob,

    I have been mutilating nice pieces of wood for almost 40yrs, but I have never had a dedicated shop so I could really screw it up. The shop started as a "roof structure" (county's name) for a p.o.s. single wide trailer. We demolished the trailer and found the roof to be really well built. The county made me jump through a few minor hoops to keep it, but it turns out if you pay the county money they can be pretty reasonable. So here it is. The foot print is 70'x18' x11' 6" Except for the concrete pour and hanging the garage doors I did all of the work by myself, which is why is took a little over a year to get it to this point. This is where it started, and the pla…

      • Like
    • 17 replies
    • 3.2k views
  13. Started by Decinder,

    Next tool I wanna get is one of the above. Wondering if anyone had thoughts on which would be best as I will have to wait a while before getting the other. Thinking the bandsaw is more versatile and would allow me to do more. Or a jointer is also possible but I think that one of the other two would be more useful. Mostly building smaller household items right now such as cutting board, end table, magazine rack, etc Sent from my iPhone using Tapatalk

      • Like
    • 18 replies
    • 3.6k views
  14. I've read a bunch of reviews of the Rockler 4" quick release fittings for dust collection - seems people like them. For me the 4" is too small but I am hoping someone knows about similar products for 5" and 6" hoses/ports...? I'm considering for 2 or 3 locations in my shop (and also for my grass catcher on my Kubota T2080 riding mower - but that's another topic).

    • 1 reply
    • 2.9k views
  15. Started by Brendon_t,

    This is an older model pm that was discontinued a few years ago. I bought it for a steal at an auction new in box knowing almost nothing about it. I was banking on the brand equity of pm that the unit would work and not be a pos. Ultimately, if it turns on, it will be better than my current 1/2 hp air pump and shop Fox bag set up. I have attempted to find info on the net but it is severely lacking. Does anybody have any experience with this unit? I would like to heat the good and bad.

    • 8 replies
    • 6.3k views
  16. Started by estesbubba,

    Since you never get your shop layout perfect the first time, I think I'm going to use French cleats so cabinets, etc. are easy to move. I'm looking for pictures, websites, etc. for ideas on what all people have done using French cleats for shop organization. I know it's really just a way to attach to walls so really any storage ideas would be great.

      • Like
    • 13 replies
    • 15.2k views
  17. Started by Dnorris1369,

    Anyone have experience with the rapid air system. It looks good but I know looks can be deceiving Sent from my iPhone using Tapatalk

    • 1 reply
    • 3k views
  18. Started by duckkisser,

    I need a bunch of 4x4x4 y fitings, 4x4x2 y fitings blast gates, dust hoods, and hose for both 2" and 4" planing on seting up all my dust collection at once. But I want to save my money where I can. So where have you found to have the cheapest price on dust collection fitings? I'm planing on using pvc pipe so they need to fit pvc

    • 2 replies
    • 3.3k views
  19. Started by Brendon_t,

    So I've been saying for a while that I was going to do a shop tour. I finished an ars wipe down at a decent hour so I took some pics. I can't figure how to add the narrative for each shot below or above it so each burst will be guided up here.this is the view from the house door. I was gifted the front half of the garage to do as I will. As you may see, some of my stuff still makes it's way to her side. Ie fishing rods, gun safe, snowboards, 4 compound bows..ooh well. here is the view from the door. standing in front of the band saw, my main tool box which is actually used more than my bench because I love the height. Nestled between the tool box and shop made ro…

      • Like
    • 26 replies
    • 7.6k views
  20. Started by duckkisser,

    my shop classroom has just recently moved and it is placed right in the middle of the building. so people walk through from time to time and I want to make sure our clamps wont be stolen. because of the weight of the clamps we cant hang on the drywall and more importantly my boss said no so I was planning on making a self standing clamp stand similar to this but we need to secure the clamps when were no in the room. http://www.woodworkersworkshop.com/store/media/ecom/prodxl/28-149700.jpg

      • Like
    • 19 replies
    • 4k views
  21. Started by shaneymack,

    Hi All, Long time reader/lurker- first time poster! I used to have a shop in my single car garage for about 8 years. About 3 years ago i thought it would be a good idea to sell everything since i wasn't doing much woodworking at the time and my wife was pregnant with our second child it didnt seem like more time for woodworking was on the horizon. What a dumbass idea thar was. I have been listening to woodworking podcasts, reading every forum and daydreaming of woodworking everyday since. Sooooo, now that my wife is pregnant with our fourth child i figured no better time than now to start over!! Lol! For the record my wife agrees and is very supportive. So far i h…

      • Like
    • 150 replies
    • 29.8k views
  22. Started by Llama,

    After a long time of getting good advice, and thinking I knew better my shop looked like garbage and was extremely inefficient. With the addition of the Supermax 19-38 and dust collector, I really needed to do something about my pathetic excuse for a shop. And with Kev in town, the time was now! I now have an efficient shop, with a place for everything. Thanks Kev!! On to the pics. The obligatory Eric pic.

      • Like
    • 22 replies
    • 4.6k views
  23. Started by woodmang,

    I have a nice sized detached garage that I am planning on converting to my shop. Currently the only "utility" it has is a 60 AMP service from the house (it's own box in the garage, house is 200 AMP). I am starting to plan out my design and had a contractor come out to quote running gas, water, and sewer to the garage. The quote came in at $3,500. So how much would you pay to have a sink, and gas hookups in your shop? Am I crazy for thinking that is a good price? I have not yet researched the way I am going to heat the shop, the gas line was kind of a "why not? when digging for the other.

      • Like
    • 16 replies
    • 4k views
  24. Started by chrisphr,

    Three months ago I decided to set up shop permenantly in my garage. Been working on it just about every weekend. Here is before shot one wall. Everything on wheels, pushed to the side to park the car: After shot. Added cabinets, miter saw station, planer on wheeled cart, dust collection system, air conditioning. Before shot, adjoining wall (really it is in progress, I had already started the demo work): After shots. More cabinets, tool trunk area can be used as a desk. Clamps are a mess, that is a future project. Before shot, third wall. After shot. Will build scrap bin, but this will do for now And...

      • Like
    • 14 replies
    • 3.1k views
  25. so i am trying to figure out my dust collection if i have my dust collector in the middle and 3 trunks i can have the best suction over a short distance or i can put it at the end of the run beside my work bench wrap the pipe along the back and side wall and then bend towards the middle. but then the pipe at the end will have weak pull at my jointer/ table saw ect..... ultimetly do you guys think a 1.5 hp dust collector will have enough pull to keep the machine clean over a 40-60 foot pipe? and if i put the dust collector in the middle ill be walking back and forth to the dust collector ever time i need to open the gates. anyone with more experience setting …

    • 10 replies
    • 3.2k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.