The Shop
1,954 topics in this forum
-
Looking for input for clearance to the left of a table saw. I am trying finalize my layout in my 22 x 22 garage. I need to get the saw on the left as close as I can to one of the walls. How much space do you leave between your saw (left side) and anything else?
-
-
- 8 replies
- 3.3k views
-
-
I've just spent the last hour going through old posts on here, trying to educate myself on lighting for the shop (an uphill battle!). I even tried to use that visual-3d tool, but I've gotta admit I'm completely stumped. Attached is a snapshot of the floorplan for my proposed shop (just applied for the permit yesterday). It'll be 22x36 with ~10' ceilings on the left and right and a "cathedral" ceiling down the middle. (will use the loft space above left and right for storage). I'm working with a GC who's trying to put a quote together - just curious what you guys would do for lights? My initial thinking was 2-bulb T-8 fixtures (or an LED equivalent): 4 on th…
-
-
- 22 replies
- 3.7k views
-
-
As some of you know, I'm preparing to order a new dust collection system (Clearview/Nordfab). I obviously need to make sure my shop is exactly how I want it before using their design service so, I've been making minor changes here and there since I got home. Well, today I made some major changes. I added the drill press station which opened up enough room at my drum sander to replace it with a Supermax if/when I decide to do that. I also flipped my table saw/outfeed table around which got all my tools closer together since I do a bulk of my work on the outfeed table. You will also notice that my bench is absent.. No worries, it will be back. It's getting a new top an…
-
-
- 34 replies
- 7.6k views
-
-
I am in the process of thinking through tools that will be in my workshop. One part of my workshop that I will take very seriously is dust collection. Earlier this year, I had a chance to buy a very nice Coral DC machine. It is 3 Phase, 4 HP machine that has 2850 CFM power with 10" inlet. I am hoping that is powerful enough to serve my whole workshop. By the way, I paid $350 for the machine and thought it was a good value. The fist thing I did was to chuck the cloth filters and plan to replace with Wynn Env filters. I also plan to convert to 2 stage system. I would like get input from members on the best way to accomplish this. I have looked at the Oneida Dust Dep…
-
-
- 16 replies
- 3.1k views
-
-
Well me and my new wife just moved into a new house that we will be renting for a few years. Has a small storage shed in the back, and next to it, is a much larger shed that the original owner had wired up as his shop. While I'm unsure what he used the shop for, I'm going to turn it into my wood shop. The electrical set up doesn't seem to be working, so all I have, as of now anyways, is a battery operated light. Has lights in place but no power. So step 1 will be getting power in place. Once I have that, it's on to build my first shop. Oh, and I gotta get rid of the spiders. Not scared of them, but they're the tiny ones that you don't really see. But that's the least of m…
-
- 6 replies
- 2.9k views
-
-
With football season almost here, I need something a little more comfortable than a bag chair for when I take breaks. I have a Fire TV stick so sometimes I just like to go out there and hang. I'm not looking for anything big and heavy as it will need moved around often. Any suggestions? I'm thinking of this and thought cream or palimino would help hide dust. http://www.amazon.com/dp/B005G9GV5I/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=IVTC5RI2ISED&coliid=I1PDP96KN149UH&psc=1
-
-
- 9 replies
- 2.9k views
-
-
Three years ago, we moved to a ranch on 29 acres that I bought from the bank after a foreclosure. As with most foreclosure properties, it needed a lot of work so I ended up taking a break from woodworking for a couple of years while we remodeled the house, rebuilt fences, etc. At the beginning of this year I decided to set my sights on setting up a proper workshop, so I started working on converting a barn on the property into a new home for my toold Coming from a two car garage, this 40'x24' dedicated shop is very luxurious. It is drafty and has a few leaks in the roof, but it feels like home.
-
-
- 14 replies
- 3.4k views
-
-
What is your preferred shoe/boot option for wearing in your shop (and what kind of shop floor do you have)? My shop used to be a garage so I have a concrete floor. I also have a few anti-fatigue mats I got from Grizzly (which I like and definitely notice the difference). I've been wearing a pair of older running shoes (good quality New Balance shoes) but at the end of the day my feet are hurting quite a bit so I'm hoping to learn from your experiences before I go buy new footwear. I know I could buy 'work boot/shoes' but I don't find most of them very comfortable and I don't like the extra weight. i should mention that I'm not the slimmest guy you'll ever meet so that m…
-
-
- 45 replies
- 8k views
-
-
I thought that now that I have most of the "big" tools that I want, I would post a few pictures of my shop area which is about 18 ft. square. I still want to get a spindle sander of some sort, always working on the clamp collection, thinking about an upgrade on the DC and there is about 5 - 7 more router bits needed but other then that its close. But like a lot of things "never say never".
-
-
- 24 replies
- 7.4k views
-
-
just throwing out some pictures of my shop (garage) or how to put 10 pounds of s%#@* in a 5 pound bag, the car has to live in there, sorry eric,
-
-
- 9 replies
- 3k views
- 1 follower
-
-
My shop is actually a larg-ish 2 car garage, in which I still park two cars. I'm working on the arrangement to make access easier. I have three old free standing book cases that I use for storage, but I want to remove them and free up floor space for tools. The ceiling is 12' high, and the walls are still bare studs. Any suggestions on how I can make the most effective use of all that wall space?
-
-
- 14 replies
- 3.8k views
-
-
Ok I have a question my first one. I was talking with a colleague of mine and we where discussing air flow. What happen here is we are in the hvac feild and what I am wanting to know if you build a 8/16 room in my shop for lumber storage and my dust collector my colleague thinks it will pressurize the room and make the dust collector not work right because of the positive pressure in the room. So does anyone know if you put a dust collector in a small room will it pressurize and not work right thanks
-
-
- 19 replies
- 3.7k views
-
-
new to woodworking. Just bought a shop full of tools. I have a power matic 66 table saw. i also have a router table. i was wondering , has any one combined the two? I measured the space to the right of the saw between the frame for the fence and the router table will fit in there if I turn it 90 degrees. This would mean I would be standing on the back side of table saw next to my drop table. It just seems like it would serve several purposes. Any thoughts would be helpful?
-
- 6 replies
- 5.5k views
-
-
I posted some planning questions a few months ago and got some good pointers. Thanks again for that. We finally got started with the build and I thought I would spread the joy. Waiting on the inspection and then they pour the basement slab. My tools are asking every day "when are we going to the new shop?"
-
-
- 57 replies
- 14.7k views
-
-
I have a chance to buy a air filter. i was told they were around $350. I was searching web just browsing and ran across a home made one. It was a box fan lying down pointed to ceiling with a filter rack attached to back side of fan. Im thinking 30 bucks for a fan , a little wood to build a frame and bam same thing. Has anybody else got ideas on that?
-
- 8 replies
- 3k views
-
-
I'm still pretty new to woodworking, but I've got a decent shop going so far. I'm sure this is as good a question as asking your favorite color, but what do I buy next? I've got the basics so far. Table saw Miter saw Kreg jig Drill Along with an assortment of hand tools. For a weekend warrior looking to build the occasional end table, bed, or bookcase, what would you think would be the most useful tool/s? I've also got a big sturdy table that does the trick but no true workbench with vise and dog holes and what not. Drill press was where I was heading next. Any other ideas? Sent from my LG-D850 using Tapatalk
-
-
- 9 replies
- 3.1k views
-
-
Probably not the thing most of you want to think about in the dog days of summer. I've never lived anywhere a wood burning stove would be practical, until we moved here. The shop had an existing wood stove installed, but also had electric baseboard heating. So, I promptly removed the stove to free up space. Fast forward through a couple of months of $480 electric bills before I realized what was going on. I shut off the baseboard heaters and the bill dropped to $110. Point - I will be re-installing the wood stove soon, but I need to know how much room to allow around it, being that it's in a wood shop with lots of combustibles. Any insight would be appreciated!
-
-
- 24 replies
- 7.6k views
- 1 follower
-
-
As stated in my chair thread, it was time to make a major overhaul in my shop. The recent equipment additions meant that there was no more floor space. So, since I have options, it was time to make the move. As most of you know, I built my shop originally as a recording studio. I took the main room for my shop and gave up the old control room to my wife for a quilting room. I kept the office as a reloading room. The drum room and large guitar room were relegated to storage as well as the vocal booth. The other 10 X 12 room was turned into a general work area for working on the cars, metal work, etc.. My 2 car garage is attached so, this just worked out well. This …
-
-
- 41 replies
- 6.7k views
-
-
I already own an MFT/3 and I'm looking for some suggestions regarding vise solutions. I don't have a roubo or similar workbench (with a nice integrated leg or end vise, etc.) so I'm hoping to use something I can attach to my MFT when needed. Any suggestions or leads would be much appreciated.
-
-
- 5 replies
- 6.5k views
-
-
Looking to upgrade my dust collection in my shop. Its a small 10x16 shop with: 1.75 Sawstop 8" PM Jointer Dewalt 735 Planer 14" PM band saw Router table, etc etc etc Ceiling is only 78" At the moment I only have Rockler 3/4hp Dust Right http://www.rockler.com/new-dust-rightreg-wall-mount-dust-collector. Believe it or not I do have 4" ducting run around the shop. My options for size are limited and have been looking at the Oneida collection. A small foot print is key. So my question is: does anyone specifically have experience with the 1.5hp Mini Gorilla and would you recommend it? http://www.oneida-air.com/inventoryD.asp?item_no=XXP010100H&CatId…
-
-
- 17 replies
- 9.2k views
-
-
I insulated my shop well and even on the hottest days it stays under 80 degrees in there. The problem is most of the summer the humidity in there has been in the upper 70's even when it's less outside. Now it's tolerable to work in there with those conditions but I'm finding the humidity isn't good for table sled runners and spraying waterbornes. All 3 of my table saw sleds won't even drop all the way into the miter slots and they're made of QS hard maple. So do you guys think a dehumidifier would do the trick? I have a 1200 sq/ft shop and wondering if anyone has suggestions? I don't have a floor drain but could probably pop a hole somewhere for it to drain outside.
-
-
- 22 replies
- 4.2k views
-
-
Hello everyone, I am new to woodworking in general, aside from the normal around the house projects, and am at the point where I would like to be more involved as a hobby. With that said I am looking to create a basic shop in half of my 2-car garage so I can get my tools set up semi-permanently. It is a royal pain to have to dig it all out of my shed in order to work on a project so a shop is in order. I already have several of the larger tools (10" table saw, 12" miter saw, lathe (OLD), 14" bandsaw, and planer. I still would like to get a benchtop sander, jointer and a drill press but have to save up a bit more money to do so. I'd rather put the little extra I have right…
-
-
- 14 replies
- 3k views
-
-
On on Marc's video with the David Marks shop tour, David Marks' end vice is housed in wood...so it pretty much looks built into the bench. Minute 1.00 http://youtu.be/Ch8SFQJsR2E I haven't seen this before, and from what I can tell, it looks like it can be done with any high quality end vice. His looks pretty similar to my Eclipse. Also, it's super cool. Has anyone ever tried this or seen plans on how to do it? Thanks VJJ
-
- 3 replies
- 3k views
-
-
so I bught a tapered 4" to 2 1/2 dust collection hose from penn state industries I doubled the length of my hose but it's Probably the best thing I ever bought. It's tapered so it plugs and fits into all my dust gates, hoods, and pipes. I plug it into my lathe dust hood and clean up the back end, middle gate for central workbenches, and by my chopsaw by the garage door to clean up the front area. I'll probably put a gate in my ceiling pipe and then I can use that to clean up almost the entire shop. It's by far the best thing I have ever bought since now I can clean my shop quickly and easily so hopefully I'll clean after every day. Probably not but hopefully I stay on it…
-
- 2 replies
- 3k views
-
-
OK so I didn't make this specifically to strain finish... This was a ply prototype for a Greene and Greene mahogany coffee pour over station I built a few months ago. Since I burned calories to make it I couldn't throw the damn thing away. If you've noticed, I've been giving my shop a bit of an enema lately, as I'm trying to make some use of crap I've been needlessly holding onto. And since it just happens to fit my HVLP can... The bamboo skewers hold those FinStrainers 190 a micron filters in place, as they have little holes.
-
-
- 4 replies
- 2.6k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,009 Total Members
- 3,644 Most Online
-
Joseph b Newest Member ·