Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Shop

  1. Started by Brendon_t,

    Soo, I humbly come before this tribunal to right a wrong. I've been pretty open about how I feel about my woodslicer bs blade. Last night while doing a bit of clean up in the shop, I raised the guards to check the table for level and noticed A LOT of deflection in the blade, and then it hit me. About two months ago, I put a 3/16" blade on for some tight work with the kids for their derby cars. And never tightened the 1/2 blade back up properly. My drift, wavey cuts have been a product of me not doing my part. I'm not saying it's a great blade because I wasn't super impressed before but any crap I talked in the last two months should be discarded. That is all.

      • Like
    • 8 replies
    • 2.9k views
  2. Started by PWRFULZ3R0,

    My wife and I bought our first home at the end of October and it looks like a done deal. I say that because the last deal we had on a home fell through after inspections. This passed with flying colors. I was sold when I saw the garage, it's 32'x20' 2 car garage with an additional 14'-9 x12'-3 workshop off of it. All of which is under the home. One of the first things I'd like to do before we even move in is have the garage floor epoxy painted by a pro, but winter is coming and I hear it doesn't install great with a cold floor. Other things that need done are running a sub panel and circuits, installing LED light fixtures, and painting. I probably won't do it this w…

  3. Started by Dnorris1369,

    Anyone have experience with any kind of automated dust collection? I have seen the grngate one and this is the kind I'm looking. Something where you can just turn the machine on and go to work. I plan on using 6inch ducting system( metal ducting probably ). Thanks in advance for any info. Sent from my iPad using Tapatalk

      • Like
    • 17 replies
    • 5.3k views
  4. Started by davestanton,

    Hi Guys. I have a radio transmitter fitted on my property and also a pair of radio receiver earmuffs, but the muffs' radio is rubbish. I can tune my other fm receivers in perfectly so not the broadcaster's fault. Does anyone know of a quality headset that acts as a pair of earmuffs against high pitched sounds such as routers etc and also has a very good quality fm radio?

  5. Started by socoj2,

    So when i built my house i put in a 200 amp panel. (shoulda done a 300.) Im just about out of room. And i need to finish my basement. So ill need another set of 220v breakers in addition to the light and electrical sockets for 1200 square foot basement. In addition i would like to run 3x 220 runs to my shop in the basement. I have 220v 50amp for the garage, 220v 30 for my compressor and 3x for the AC unit. Im sure if i went down there and totaled it im over subscribing my 200 amp panel but it passed inspection. What are my options? upgrading panel?(seems most expensive option) sub panel? Additional service panel?

      • Like
    • 8 replies
    • 2.9k views
  6. Started by Immortan D,

    I made this vise based on the Veritas Surface Vise, with a few improvements. The main problem with the Veritas is that it takes so much workbench space, and I can't afford that since my workbench is already too short. It costed me nothing, I made it using parts from a $20 work table I disassembled long ago to make my miter saw stand, and some plumbing parts I had laying around. I'm very happy with this vise, it gets the job done for what I need it for. The vise:

      • Like
    • 6 replies
    • 5.5k views
  7. Hello, I am hoping you folks can help me decide which type of workbench/outfeed table/assembly table might work best for my situation. I have a two car garage shop that has to store one car most of the time. I know that is blasphemous but the car is a cobra replica I built a few years ago so I am more than happy to live with this concession. My wife is awesome and we keep our daily drivers and most non-shop related stuff out of the garage. I usually store the cobra off-site during the winter, when I do most of my woodworking (though, when serious snow is predicted, I put one of our other cars in the shop). Since I generally have to move the cobra replica in and out of …

      • Like
    • 10 replies
    • 5.2k views
  8. Started by estesbubba,

    One thing I didn't plan very well with my new shop was the lumber storage. I originally was just going to move this into the new space, but as construction progressed and I got my machines and dust collection figured out, this wasn't going to work without getting the way. After a lot of going back and forth I settled on what I did at our last house - heavy duty standards and shelf brackets. Each bracket is 14" and rated for 150 lbs and I didn't have any problems when I used them before. About $4 for 48" standards and $2 for 14" brackets so not a lot of money. Funny thing is they have smaller brackets, but the smaller they are, the more they cost. I got all the standard…

      • Like
    • 27 replies
    • 6.1k views
  9. Started by boelkers,

    My wife and I bought a house about 2 months ago. The home has a 1 1/2 car detached garage that is not insulated. I had wanted to use that space for a shop, but the wife really wanted a place to park her car during the cold Minnesota winter. With that I convinced her to let me take over the two rooms in the basement since we want to remodel it down the road and we are not using it anyway. She agreed and now I have a large room for my shop that is about 30 ft by 15 ft and the other room that I think I'll use for finishing that is about 15 ft by 12 ft. The house is old and uses large hot water radiators for heating on the 1st and 2nd floor, but the basement was never ori…

  10. Started by andrew-in-austin,

    Just finished my custom mobile base. I need to move this around to get cars in the garage, but I also wanted storage under the saw to move with the saw. I plan on making some drawers to hold tools and blades. The base is made with 2.5" 10-gauge square tubing. It should be bomb proof. I just need to get dust collection duct work installed, and I should be good to go.

    • 24 replies
    • 9.5k views
  11. Started by Coren,

    Hey all, I'm new around here so I hope this is the right place for this. I'm new to woodworking. Took some shop classes back in middle or high school, have done a few projects here and there, and I recently build a desk I use everyday and realized that this is something I want to pursue. All that being said, I need to figure out some tools to start filling a shop with as I've got only the most basic of tool boxes in the house for fixing little things. I've got a detached garage that I want to, eventually, turn into my shop space. It's ~25'x30' but it lacks both insulation and power. As it's now the middle of October, I don't think I'll have enough time to properly run…

      • Like
    • 23 replies
    • 4.6k views
  12. Started by Gary Gilbert,

    well after doing some search for a rental shop or space I figured i should go for it and do one up here. will all my garbage and cars and tools i figured i would need a 40x50 . i contacted a steel company about a building. just wondering how many have a metal shop? did you opt for the insultation? ect. i plan on putting it up my self with some help. I can post some photos of my renders in sketchup but they are not finished.. Thanks.

  13. Started by Don Z.,

    I'm looking to upgrade my planer and jointer. I may go as far as a combination set, which leads to my question about power. I currently have one (count 'em) 220V outlet in my shop, normally running the table saw. I believe it's on a 12 gauge wire. There's a 20 Amp breaker on it. I'm guessing at the wire size based on the measurement of the (bare) ground wire.I'm assuming the ground is the same size as the conductor. If I'm off, I may have a 10 gauge wire. Now, the "easy" answer in determining wire size is to pull the outlet and check the wire. Tried that. The problem is that the electrician left zero slack, and I can't read the writing on the insulation. That's why…

  14. Started by -MattK-,

    Any thoughts on building a sound-proofing closet for the DC vs just hangin' it on the wall? I'm still playing Barbie dreamhouse with the shop layout and considering swapping the DC to a different corner. I think it'll make duct layout marginally better, but it'll now be right by the workbench. (dust collector is a clear vue 1800 if it matters - I haven't heard how loud it is since it's still in the box waiting for a home) thanks! Matt

      • Like
    • 22 replies
    • 4.9k views
  15. Started by wouldwurker,

    Despite countless unfinished projects, I've found myself overhauling and rearranging my shop. So no better time to finally get some proper dust collection set up. Pipes are hung off the studs (sorry) and I'm still lining things up and shifting things around. Think I still need to use the bandsaw on some bigger boards to really get a feel for the space I need around it.

      • Like
    • 15 replies
    • 3.8k views
  16. Started by Workofwood,

    Is it possible to change out just the motor on a delta 1 hp DC. the 1hp is just not adequate. I have a system with a cyclone and then the filter bag down into the final trash can. It has 4 inch piping all over the shop. The suction is pretty terrible, enough to such up the fine saw dust (not the really fine stuff), but it leaves a lot to be desired. Any suggestions? First I need to know if you can even buy a motor separate from the rest of the setup. I would rather not buy a whole new dust collector, just the main motor.

    • 6 replies
    • 3k views
  17. Started by Andy Wright,

    I've been collecting hardware for my whole life and have it all over my shop in various containers. I bought some metal storage drawers at a yard sale (the green/white ones) and decided it was time to get things a little more organized. Nothing fancy, just a shelf made from poplar face frame and plywood carcass, but my hardware collection is happy

    • 6 replies
    • 2.9k views
  18. Started by Janello,

    So, I finally saved enough money to buy my big ass shop lights. I looked online last night and Home Depot had them on sale marked down 50 bucks each! I wanted to pay cash (to fly under the wifey radar) So today I went to my local home depot to order them. The woman at the courtesy desk looked them up and WHAAA???!! they went back up in price since last night!!! So she called Anthony the Home Depot King and and pleaded my case. Turns out Big Ass lights had an overstock promotion that ended last night. She was able to get Anthony to give me 5 lights at 10% off out of pity. So I still saved around 40 bucks a light. I should have them in a couple weeks. I may need one more f…

      • Like
    • 15 replies
    • 3.4k views
  19. Started by Jim DaddyO,

    I am still waiting on permission from the conservation authority for my new shop build. I have picked out a spot and will start to level it as soon as they give me the thumbs up. This is their busiest time of year, overseeing commercial dredging and checking things now that the ice is gone but I am still hoping I hear back soon. I had the spot marked out, but the grass has grown a bit and I had to re mark it. I think the view out the windows will be nice too! https://www.youtube.com/watch?v=JeGbDPOJID0

      • Like
    • 178 replies
    • 31.1k views
  20. Started by jds,

    I know this isn't a normal "shop", but for me I had to go more more mobile! Hopefully it will give some good ideas for someone. (click on link for detailed pictures) https://www.dropbox.com/sh/b1jq02kydllrili/AACali1NA8MqDELBzi0qxagLa?dl=0

    • 6 replies
    • 3k views
  21. Fall is coming and that generally means more shop time for most of us. Just wanted to share a nearly catastrophic incident I just had as a reminder to all that power tools demand 100% of your focus! It's the end of the day, I'm tired and my mind was not where it should have been when cutting some small wedges on the bandsaw. Generally I consider the BS to be fairly safe, however today I got a little too lax and was heavily distracted by the amount of flies buzzing around the lights in my shop. I just had the building sprayed an hour ago and I was dreaming of the piles of dead flies I'd be sweeping up in the morning :-) Right then, my finger touched a brand new 3/4" Woo…

  22. Started by Eric.,

    Long overdue, but now it is done. That is all.

      • Like
    • 21 replies
    • 4.4k views
  23. Started by Brendon_t,

    With the garage to shop renovation about ready to start, I've been watching cl for any base cabinets like someone tearing out a kitchen but haven't seen squat. I know its been covered but its buried in the search function. Anybody have any advice where to look for decent (read as not nicer than my kitchen cabinets) cabinets or boxes? I don't mind buying just boxes and making face frames and doors.

      • Like
    • 23 replies
    • 3.9k views
  24. Started by Brendon_t,

    Had a major fire scare today. Everybody knows they need at least one fire extinguisher on hand. Here's why. Like many bathrooms with an exaust fan, I hadn't changed the filter in a few years. Luckily I was working at home when the wife went off screaming like crazy. I ran up stairs in two bounds to find smoke billowing out of the kids bathroom. I have a fire extinguisher. I know I do. With the fire flowing across the ceiling,, dropping firing plastic onto the toilet, and a towel on fire, I couldn't for the life of me remember where it was. I was able to get the fire out, after getting the kids down stairs and out of the house. The infuriating thing to me. I have 2 smoke …

  25. Started by Brendon_t,

    I may get a PWI but ooh well. Thinking about starting the roubo build has me wondering if I should in some way fix the infeed and outfeed table supports for my delta lunchbox planer. I say fix but I'm not meaning they don't work, mitre like get them in a fixed position so that I can shim them up/down if needed to deal with the snipe monster. Initial thought is to double up some 3/4 sheet good, affix it to the harbor freight 16"x16" base and set the planer atop with some sorry ofor stop on the outfeed to keep it from sliding that direction. Any other thoughts or solutions?

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.