The Shop
1,954 topics in this forum
-
When planning to do the Happy Wife Kitchen Upgrade I was really dreading cutting sheet goods on the floor. I also anticipated building a lot of pull out drawers as a small business. So I invested in a panel saw kit to make the work easier and faster (it really is!). But having a two car garage size shop where space is at a premium, I needed an out of the way place to store it. I hope my idea helps you all if you choose to get one for yourself.Check out this 2 minute video to see how I did it. Let me know what you think.https://youtu.be/MeYvtwP1lrM
-
-
- 14 replies
- 3k views
-
-
My wood shop is small and pretty filled up. I recently purchased a Grizzly 0766 lathe and while it fits I have been considering buying a premade wood shed to house just the lathe. I would leave the other woodworking equipment in the current shop. Has anyone used a shed for a shop? Did you use it as is, put it on a foundation or concrete slab or something else? The one I am considering is a 10 x 12 Old Hickory Shed. Apparently they sell in 15 or so states.
-
-
- 4 replies
- 3.1k views
- 1 follower
-
-
I am getting close to moving things around in my shop and I would like some review of the layout I am thinking of using. First, some restrictions I have to live with: There is a raised section on the back 3 feet of my shop. My shop started as a double garage and code around here states that no fluids may flow into the house, so the contractor poured the floor slab with a raised section that is used for a walkway to the side door of the shop. I can't block the door because it is used to access the trash cans. The raised area restricts my ability to place tools on the back wall, which is why you will see them move out from the back wall. My shop is about 20 feet wide a…
-
- 4 replies
- 2.9k views
-
-
Hey everybody just joined the site was wondering what anyone thinks of using a large gun safe for hand tool cabinet. Completely gut inside and redesign to a tool cabinet any ideas on how you think it would work would be great thanks for any advice
-
-
- 22 replies
- 3.8k views
-
-
I almost posted this in one of the current threads, but decided to make a separate thread in case anyone does a search in the future. This stuff seals a connection just fine, and you can get it off cleanly at least after couple of years very easily. Even if you anticipate you might make a change in the future, it's a factor of 100 easier to get off than metal tape or mastic. http://www.amazon.com/Scotch-Painters-Clean-Removal-Outdoor/dp/B0067NLZOE?ie=UTF8&refRID=5FRK6PETSD6MJW6X2XVW&ref_=pd_nav_hcs_bia_t_2 It used to be sold in Home Depot, but not any more. The last I bought came from Amazon.
-
- 2 replies
- 2.8k views
-
-
Ok, so it's really a garage. We are going to do a new build house so I have two choices: 1) builder do electrical or 2) do electrical after build. pro of #1 is that it will be warrantied by builder. Also will be in wall. Pro of #2 is cost. Can get outlets wherever I want. con of #1 are cost and limitation of outlet placement. Can only get wall/ceiling mounted outlets. This is not a custom build so options are limited. con of #2 are 3rd party warranty and possibly not hidden in wall. Could get pricey if electrician has to cut into drywall to run wiring. If you had a similar decision to make, which way did you go and why?
-
-
- 14 replies
- 3.4k views
-
-
Well what is it? Is it glasses, tape measure, pencil, that beer that was here a minute ago or in my case, I use a walking stick to help me get around and I am always hunting that thing. Let's hear from you what item is always getting away?
-
-
- 41 replies
- 7.4k views
-
-
I'm in the process of building a new shop and need to buy a dust collection system. The shop I am in now is 20'x20' and has no system installed. I have done all cleaning up with a small shop vac and a broom. My new shop will be about 40'x 25' and I have the budget to buy a system for it. One guy I met recommended the mini-gorilla which is a portable unit, but I'm not sure if portable or stationary is better. If all of my tools are not up against the wall would the stationary system be a problem? Any suggestions would be greatly appreciated.
-
-
- 11 replies
- 3.9k views
-
-
We're contemplating moving and for some reason all the houses we are looking at have gas water heaters. Since the garage = my shop, should I be worried about wood dust starting a fire within the water heater? What about standard finishing fumes? I try to do most of my finishing with the garage door open, but if it is later at night or windy, the door remains closed. Adam
-
- 8 replies
- 4.9k views
-
-
One of my customers for my real job is Hon Manufacturing. They make office furniture. These cyclones draw the dust and debris from the milling machines and load directly into semi trailers. The duct work is big enough to crawl through. Just thought you guys might get a kick out a real dust collection system. They mill mostly MDF and you could eat off the floors. No dust anywhere inside. No masks required.
-
-
- 21 replies
- 4.8k views
-
-
Gonna add more as I go. Stupid small things I've wanted to do for a while. To start, 24 screwdriver holder, and 4pc chisel holder. My narex's have a case I just leave them in, these get used more *shrug*. Literally had no place, and I have a bajillion screwdrivers but can "never find one" lol. This should help alleviate them. Both pieces made from some maple scraps, dowels to hold the chisels To do -> - rack to hold dimension tools (calipers, dial indicators, engineer squares) - rack for my small japanese saws - sanding disc storage
-
-
- 37 replies
- 8.7k views
-
-
I threw this incubator together last season as opposed to dragging the glue into the house each night. Has worked well, uses a 40watt bulb and it went through two bulbs for the season. I added an element of danger by also storing the spray cans of paint in there, all the flammable stuff in one place with the ignition source close by........so far so good.
-
- 5 replies
- 2.7k views
-
-
over the winter months all of my woodworking tools were shoved in the corner of the garage to make room for other stuff. So over the past couple weeks I have started moving stuff back out and getting everything set back up. I have also decided to make some upgrades. I was playing with sketchup the other day and deiced to do a rough layout. I have done a couple small shop furniture projects since i arranged everything. I am pretty happy with the layout so far. I stalled new pvc duct work for my dust collector. I am pretty happy with the amount of suction the HF dust collector is providing. I am now in the process of building a control system …
-
- 10 replies
- 5k views
-
-
Guys, hope one of you knows what Im looking for. Im building a watch case, and theres a special type of hinge that is mortised in, its also got a curved metal piece that keeps a lid from over extending open, kinda locks it open at 90 degrees. Im not looking for a specific hinge more or less looking for a specific function. If you know of a small, good looking hinge that will keep a box lid from flying all the way open, please lemme know!
-
-
- 14 replies
- 3k views
-
-
Had an interesting chat at a store last week. The rep in the shop said that a number woodworkers come in with O2 tanks and such. Lots of lung problems (apparently) from woodworking. So I was wondering how much lung protection is used out there. Something to consider: Those medical-style dust masks only filter larger pieces and are generally intended for droplet-born material. Because they don't fit tight they're not going to protect much at all from the finer material.
-
-
- 25 replies
- 6.4k views
-
-
Weather has finally turned a corner here, so I have been out in the shop getting some organization, upgrades, and tuning done. Task 1- chose, buy, and install an ambient air cleaner. Took me a while to select one, but I finally did and went out and bought it. I bought a General Tools 10-550 Turbo, which runs 800 CFM (one speed) and filters down to 1 Micron. This thing moves some air in my small shop - holy cow! Its got some nice features (remote, timer, filter sensor, etc.) and was smaller in size than many others in the same performance category. This sells for a whopping 700 CDN, but I got it for for about 500 from a machine buy I often buy from in Toronto…
-
-
- 18 replies
- 4.1k views
-
-
This is a dust collection cart that I made for my small workshop that serves multiple purposes: o It provides a handy portable working surface of various shop projects o It serves as my primary means of vacuuming dust from the floor and work surfaces o It includes a dust separator made from a Dust Deputy that separates out 95+% of the wood dust into an easily removable container (and allows the shop vac to continue to produce maximum suction) o It includes a noise reduction system for the shop vac that significantly muffles the shop vac noise (-10 dB) o It has power outlets on both sides of the cart (one is switched) o It allows easy connecti…
-
- 7 replies
- 7.4k views
-
-
Hello, I am looking for some suggestions for lighting to go under my cabinets that hang above my new work bench I am building. I would prefer bright lights that I can use a switch to turn them on. I have found several options but most seem to need a transformer or need to be plugged into an outlet. Also looking for a way to add a number of outlets just above the workbench top without have to install a bunch of outlets, this to I would like it to be hard wired and not use a plug in system. The work bench is going to be about 10' long, it is not finished yet, but the cabinet are already installed. I do not have any pictures yet but can take some and post them…
-
- 11 replies
- 6.8k views
-
-
With a new baby, I'm more concerned than ever about air quality. I'm now considering a dust collector. I imagine running piping only to the jointer, planer and table saw (the TS is another discussion, I need to build a shroud or upgrade the saw) Most all my other tools can be handled by my shop vac. I'm just going to go with the HF 2hp unit. That along with a Thein separator and a Wyn filter should handle my needs just fine. The main part of the room (not counting where the chop saw and lumber rack is) is about 18' long and 15' wide. I imagine moving the planer and jointer onto the same side of the room and just having a single, 10-15' main run with just th…
-
-
- 27 replies
- 5.7k views
-
-
It has been a little over 3 yrs since I started the shop build and as of today I think I can stick a fork in it. For the last 2 years I have been living with stuff shoved into shelves, boxes, and drawers, which is really tough on hand tools. This last push started in January when I partitioned the shop area from the rest of the building with a man door. Then put in a ceiling and blew in insulation. (Made all the difference, shop stays warm and cool.) At the same time I ran the ducting for the DC. Then in March my wife found a lathe for me so I had to rearrange some tools to make it work. I moved my drum sander to the opposite wall to make room for the lathe…
-
- 4 replies
- 3.8k views
-
-
I have a bit of construction knowledge but not a lot of woodworking. I have spent the last 15 years remodeling my house, a couple of rentals we own and a couple of houses we "flipped". I have spent the last two years building my barn and finishing my workshop. I'm just now getting to building my cabinets and benches and am in desperate need of dust control. I can live with sweeping shavings but the fine dust is not only hazardous but miserable. I have a shop vac / dust collector and have seen some schematics for home made cyclone systems that run off those. I'm not in a position to purchase new system right now and I don't know enough about them to judge some of th…
-
-
- 8 replies
- 3.2k views
-
-
I have a small shop, former 1 car attached garage converted to bedroom with raised floor - 12' X 18', I'm turning it into my wood shop. I just added advantech subfloor. The wife doesn't like the raw look. Simplest solution would be painting. Anybody have a better suggestion?
-
-
- 5 replies
- 3.1k views
-
-
I am going to build a few of my own extensions with custom lengths you cant find at the store. I will have a couple quad boxes and a few other specialty length cords. My main question is, should I just buy the big 250ft (yes about 250 or so is what I will need ... if it turns out I need less I can always find plenty of uses for the extra doing yard work) spool here: http://www.wireandcabletogo.com/12-3-SOOW-Portable-Cord-600V-UL-CSA.html or Should I try and find sales going on for something like the below from home depot and chop up to what I need?
-
-
- 12 replies
- 4.1k views
-
-
Looking for help with one little wiring issue. I am trying to add one receptacle to an existing circuit. Nothing more. I have attached a diagram of the circuit. The circuit has a switched light and I want to add one outlet that also goes on and off with that same switch. Where do I splice into the existing circuit? I originally just took the hot(black) wire spliced it with the black going into the light and took the white/neutral from the outlet and spliced it with the white going into the light..... That in turn made the fire alarm also connected to the circuit go off. (at 11:30pm with the kids asleep,,,wife not happy) . I usually leave electrical work to …
-
-
- 5 replies
- 4.2k views
-
-
Grizzly has an overhead air filter on sale. It's 1/8 hp, with 3 cfm settings of 260, 362 & 409. It filters down to 1 micron. I know I should have one and this is a good price. My shop is 12 x 24. Is this big enough? At $109 plus shipping it's a good deal.
-
-
- 10 replies
- 3.3k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,009 Total Members
- 3,644 Most Online
-
Joseph b Newest Member ·