Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Shop

  1. Started by davestanton,

    I guess I am not the only person who has suffered from cutters getting lost or chipped from banging into other cutters and so on? So, I transformed this.. Into this... You can watch the 5 minute video here if you want to. https://youtu.be/_CdqqyC-RfI

      • Like
    • 15 replies
    • 3.1k views
  2. Started by keith.d.mullins,

    Put in a new shop. 24x16, Not huge but bigger than anything I have had in the past. Want to move up from my shop vac and dust deputy to a 2HP Grizzly G0548ZP. The research I see says I should go with 6" pipe, but I am wondering how much it would hurt to go with 4". I will be running only 1 machine at a time and only do hobby work, weekends, etc. Have 13" planer, TS, MS, and jointer. I may add a machine or two, but nothing elaborate, so how much is enough for a hobby shop?

  3. Started by bigarm,

    Bought a lathe a couple of months ago and put it in my wood shop. It fit fine, but I found that I couldn't move my woodworking tools around and since it is a narrow shop this is a must. So I bought a shed for the lathe. Made a walkway, then got insulation and rough in electricity. Then I started finishing the inside. Now I just need to get the electrician back to finish his work and I can move the lathe in.

      • Like
    • 7 replies
    • 3.2k views
  4. Started by Gixxerjoe04,

    Finally about to try and get my shop in order, first thing was to get my lumber racks up and get all my stuff out of the way. I have two sets of the portamate racks that can technically hold 100lbs per level. https://www.amazon.com/Storage-Portamate-PBR-001-Six-Level-Organizer/dp/B004DGIZMW Since I'm in a garage in a basement now, the ceiling height is probably 8-9 feet I'd say, not 12' like my last garage. Was thinking of stacking them since I have one good studded wall to hang them from since the back wall has a staircase and awkward shape and the other side is concrete. Do you all think having two racks stacked like that, with a ton of weight, would be bad for…

      • Like
    • 25 replies
    • 6.1k views
  5. The company name is JD Metals I ordered, and received shipment of a batch of roofing metal for a standing seam roof. We were well into the process when the next step was putting on the hip caps. This is not the first one of these roofs I've installed. Other similar roofs I've installed have withstood hurricanes with more than minimum hurricane force winds, with no damage. Once the standing seam panels are installed, with no exposed fasteners, there are right angle bent "Z closure" strips screwed down to attach the caps (ridge or hip) to. The strip is in a right angles "z" shape so the fasteners will be hidden uphill on the bottom leg of the Z. This is the…

      • Like
    • 2 replies
    • 3k views
  6. Started by Gixxerjoe04,

    Still not finished with getting my shop together 100%, but it's close to being done and figured I'd show everyone what I'm working with and any suggestions. Need to build or buy a shed to get my mower and yard tools out of my way, electric ran, general clean up and put more crap away, and need to sticker my lumber and get another rack added to support the long pieces but that can wait. Here's a video I made of it, but i hate talking on camera so i might sound like an idiot. Will post pics as well in case you don't want to watch.

      • Like
    • 11 replies
    • 3k views
  7. Hello all, I've been building up my shop using some of the recommendations from the idea shop 6 from wood magazine and was wondering what y'all thought about that series. I personally had some of the stuff they recommend getting but am very glad that this came around to give me some tips and ideas on what I still need. I think it has helped me quite bit (even if I'm leaning towards being more hand tool oriented)! That being said, I've reached a point that I need lumber and sheet good storage. I am thinking of making the sheet good storage from wood magazine, the same one that Jay Bates built. My question to the forum is: what materials I could get away with to l…

      • Like
    • 6 replies
    • 3.1k views
  8. Started by Tom Cancelleri,

    I'm looking for a shop stool. I prefer the 4 leg quasi padded stools that look like this. However I'm not a chevy guy, a ford guy, or a john deere guy. Anyone know a place to possibly get something woodworking related. The other stools I see are Star Wars (more of a trek guy), SnapOn, CAT. Do woodworkers never sit? Sometimes it'd be nice to sit for a few minutes and not on a folding chair. with my chin being at the height of the Roubo.

      • Like
    • 30 replies
    • 8.1k views
  9. Most of us are pretty familiar with the Oneida Dust Deputy, the little cyclone that adds on to shopvacs. Yesterday I took a couple hours to install it's big, big brother, the Super Dust Deputy XL. When I first moved from a small basement shop to my new shop, I went from a 1HP dust collector, plugged into one tool at a time to needing ducting and a larger collector. I probably should have bought a cyclone, but I was trying to save money so I grabbed a 3HP Double Canister Dust Collector from Grizzly. It has plenty of airflow, but bag changes sure suck! In my standard DYI spirit I made a Thein tophat and it worked very well, catching about 95% of my debris coming …

      • Like
    • 5 replies
    • 5k views
  10. Started by midtnwoodworker,

    I know this has been covered before, but I need some assistance from those who know more about it than I do. My shop is a metal building on the outside and I have metal walls on the inside. There is about 6" of open space between the outside metal and the inside metal walls. I am at the point where I am ready to insulate it. I live in Tennessee and have heard that I should put vapor barrier between the inside wall and insulation? I will be building a new shop within the next few years, but I am tired of the heat and cold in my current shop. I really don't want to take the metal walls down on the inside and put vapor barrier or stud the walls to put batt insulat…

  11. Started by BeautysBeast,

    We bought a home down in TN as a vacation/retirement home. (10 years to go) Finally got to set everything up and build my workbench. Not nearly as pretty as some of yours, but functional and VERY sturdy.

      • Like
    • 16 replies
    • 3k views
  12. I just bought the large lot for my "forever" homestead. Naturally, given that I'm posting here, a nice shop building is a big part of the plans. So, I'm just starting the "blank piece of paper" part of the design process. Blue-skying it, as it were. I started thinking "inside the box", in a rather literal fashion. Then yesterday, while looking at the most likely spot for the building, realized that a non-square shape, like an "L" shaped building would allow me to make it bigger while still taking down fewer nice big trees. That got me to thinking...what would be the ideal "shape" for a shop? Would the ideal shop be a square? A rectangle? A triangle? …

      • Like
    • 24 replies
    • 5k views
  13. Lets avoid power tools and clamps. Too touchy, so lets go over other things. I'd love to hear of some good buys from HF, and maybe theres stuff you havent thought about on here. Things i personally love - super glue. Cyanoacrylate is Cyanoacrylate . The super glue is fine, and compared to literally anywhere else is an absolute BARGAIN - scratch awl. dirt cheap, very useful. - bottles of all types. Glue bottles, alcohol bottles, generally anything. Cheap and easily replaceable. Works great - they sell meguiars compounds at HF... use that 20% coupon to get an actually great product for a good price - they have thick tarps that hold up well. The…

      • Like
    • 53 replies
    • 15.1k views
  14. Started by jeffpNC,

    Anybody here have a wood shop powered by an off-grid solar panel based power system? In particular I'm thinking along the lines of a system built around Outback, Magnum, or similar pure-sine units for the power invertors. I'm just wondering how well the listed specs translate to a practical system when one is talking about 120V and 240V heavy machinery such as table saws and dust collectors, etc. I have the needed skills to design such a system based on the specs...but I've also lived long enough to be acquainted with the reality that things don't always follow the numbers in the real world. Hoping somebody here has some real-world experience with this aty…

      • Like
    • 26 replies
    • 13.9k views
  15. Started by Chet,

    Kev stop by a couple of Saturdays ago for a shop visit. A beer lead to idea of replacing my old work bench with a new miter station. Kev said he was bored at the hotel while in town so an idea was hatched. This past Saturday we took out the old bench and built a nice miter station. This was supposed to be a journal but having a good time working together on this, I forgot to take any pictures until we were mostly done, so all you get is a couple of before and one after. IMPORTANT NOTE: Kev was the brains on this job, I just provide the shop for him to get his "fix". Old Bench No Bench New Miter Station

      • Like
    • 31 replies
    • 5.9k views
  16. Started by bigarm,

    This barn/shed was delivered yesterday and will house my lathe. I ordered it with upgraded floor with 3/4" flooring over 2 x 6" joists on 12" centers instead of the standard 5/8" flooring over 2 x 4" joists on 16" centers. Trying to decide if I should put another 3/4" layer of plywood on the floor for extra support or leave it as is. Anyone done this or have opinoins?

      • Like
    • 19 replies
    • 3.9k views
  17. Started by man of wood,

    I have a Delta 14" bandsaw MOD 28-276 and need to get a raiser for it. If you can help, please me find one. Thanks Thomas

    • 3 replies
    • 3k views
  18. I'm kind of thinking out loud here. We love our house, but our odd shaped basement kinda sucks. It is unfinished and we have no plans to. My brother in law keeps suggesting I build a wall to separate the shop from the rest of the basement. This could aid dust collection and help keep the baby out when she starts walking (a couple years before that'll be an issue) However, there are no windows on that side of the basement and I'd lose what very little natural light I have, and a door could make moving tools and maybe lumber in and out more difficult. Any other pros or cons I'm missing? Photos of my tool layout and a more general photo of the basement lay…

      • Like
    • 13 replies
    • 5.6k views
  19. Started by Gixxerjoe04,

    It's been around 6 weeks since we sold our house and my shop and everything went into storage, feels like 6 years haha. Well we finally closed on our new house today. The house wasn't everything that I wanted but is a good compromise since finding everything we wanted would have been about impossible. Was hoping for an outbuilding shop but back into a 2 car garage, luckily it's about 50% bigger than my last two car garage, plus a lot of storage in the basement, so should be a lot better. Only negatives is I have to get a sub panel ran, and put in 220 outlets and more lights, and I have to figure out the best setup dealing with the support beams, so shouldn't be too ba…

      • Like
    • 36 replies
    • 6k views
  20. The Powermatic mobile base is not readily available in Australia so I went with this one instead and whilst it isn't as steady as the saw directly on floor, the compromise is very acceptable for maneuverability. Click the link to have a look at what I did. https://youtu.be/jbAaJnbRCNs

  21. Started by Coop,

    This heat's hell. I hate to hash old meat, as I recall a thread or two from last year about air conditioning for the shop, but my searches turned up nothing. And since I was a lot younger last year, i didn't see the need for one. Can some of you fortunate enough to work in the confines of a cool shop share what you're using and the pros and cons? I'd hate to know I had to stay in the house all summer and watch Martha and Opra reruns while working crossword puzzles and drinking beer!

      • Like
    • 37 replies
    • 8.5k views
  22. Started by bigarm,

    next Monday probably. I ordered a 10 x 16 shed, which is actually 10 x 12 with a 4 foot porch to put the lathe in. Hopefully can get an electrician to come and put power in fairly soon.

  23. Started by Sbrooks,

    Im looking for a router lift can anyone give me some insight. On what the best one to get there so many of them around the same price point

  24. Started by Tom King,

    For those of you in the process, or thinking about using metal roofing with exposed fasteners: We've done more replacements on this type of roofing than I would have expected. The main problem is 95% of the time from the screws rusting out. Brand doesn't seem to matter. This is what I replace the rusted out, usually #9 screws with: http://www.roofthings.com/12-stainless-steel-screw.html That company also sells screws with painted stainless steel caps on regular screws. Those might be okay, and certainly if you need to match a dark color, I'd go with those rather than the screws sold by the places that sell the metal. It looks like to me all the …

      • Like
    • 12 replies
    • 3k views
  25. Started by BKeys,

    I've been saving my nickels for a little while and finally the mitre saw I had settled on came on sale!!! I got a Bosch 12" sliding mitre. Huge upgrade from my old 10" Protech saw. I am always amazed at the difference between "throw away" and quality tools. I was reading an article on the WW site where a guy asked about which saw blade to purchase. He was brand new to woodworking and Marc had some interesting thoughts. Marc advised him to use the stock blade for a while so he could feel and understand the difference in quality. I guess my time with low quality tools wasn't a complete waste. Next upgrade is my drill press...anybody have any suggestions or inputs on…

      • Like
    • 17 replies
    • 3.5k views

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.