The Shop
1,954 topics in this forum
-
i haven't been here lately, been busy at work and on the home front. one of the projects I have been working on is forming and pouring a 18 X 21 slab for a metal building that is supposed to happen this Friday. it has been quite an adventure because we had flooding rains almost everyday for weeks and then the day of the pour (after canceling due to rain 2 or 3 times ) my neighbor who was going to help me had to travel out of state to get his grandson to college so my 4'6" daughter came to help me. she had such a hard time with the screed board I had to say close is close enough to keep us on speaking terms. I am not at all happy with the outcome of the concrete but i…
-
- 4 replies
- 2.9k views
-
-
Hi there. First time poster here. I've been a cabinetmaker for 17 years and only now (shame, I know) I want to build myself a proper bench. The thing is, I have become accustomed to working on an 8' x 4' construction timber frame with plywood top. I really do not want to compromise on the size as I do use every inch of it. I want to build myself a split top Roubo. I haven't seen one of that size before and would like some ideas/potential hazards for the build. I.e, would I need to scale up the dimensions of any of the components to eliminate any sag or flex? All comments appreciated. Cheers.
-
-
- 17 replies
- 4.6k views
-
-
Hi there I thought I would share my progress on my woodshop. I have been working on the shop and have relocated most of the machines from storage and into the shop. I have a long way to go but thought others might enjoy seeing the progress so far. Since a picture is worth a thousand words I thought I would post a video. Is that worth more?? Enjoy!! https://youtu.be/j_j7LQlU0fg
-
-
- 15 replies
- 3k views
-
-
So 2 years ago when I built my shop I went a little overboard with anti-fatigue mats thinking that putting them everywhere would be good for my feet. Well they probably are good for my feet buy they are a PITA when it comes to cleaning the shop plus I have to watch everywhere I step. I have to sweep all the dust off the mats, then pick them all up and sweep again, then try and remember how they all go back together, so I'm looking to purge a few (or a lot). I'm thinking anywhere you stand in place they make sense like the workbench, bandsaws, router table, and drill press. Areas where you're moving back and forth like the table saw, jointer, planer, and drum sander I'm th…
-
-
- 24 replies
- 4k views
-
-
I just riged up a dust deputy cyclone for my shop vac. I vacuumed the entire shop so it's clean, and i wanted to do a shop tour. Mine is a bit different but probably boring so I'll type little and let you look. Size is 8' by 16' with storage areas outside. Inside the door is my table saw on wheels so i can rotate it when things don't fit on it. HTC 2000 mobile base, love it. Drill press and more wood storage. Dad has the same drill and a similar base, i just copied him. This shows my entire shop from the viewpoint of my drill press. To the left is an assembly table (you can see the edge), DC, computer station and stereo, and my router table p…
-
-
- 24 replies
- 4.3k views
- 1 follower
-
-
As I've stated in a few other threads, I'm upgrading the dust collection in my shop. It's taken me quite a while because I needed to make sure that my work flow was where I wanted it before pulling the trigger on ordering the system. So, after several change ups in equipment locations and test driving for a while, I think I have it.. System is ordered. Clearvue CV1800 with the over sized impeller and Nordfab 7" ducting. Yep, buy once cry once. It's not here yet and I may have to travel for work again before it's complete but, the journey has started. The first item up was electrical. I have a 24' X 28' garage that's attached (L shape) to my shop which …
-
-
- 158 replies
- 28.5k views
-
-
Just had my heater installed today to make WW a year round hobbie.
-
-
- 17 replies
- 4.2k views
-
-
I'm looking for recommendations on a comfortable work boot for concrete. My basement shop is wonderful in every way except for the concrete floor. What brand do you recommend? Thanks, Pete
-
-
- 108 replies
- 55.9k views
-
-
so recently I upgraded from a 10" sliding compound miter saw to a 12" Milwaukee 6955-20 I decided to make a permanent station for it as it will stay stationary in my shop, I added shelving along the bottom for what I call my good wood cut ends (because the station is away from the wall I can fit pieces up to 40" long). As you can see I labelled the area's for some of the more popular wood I will be using. I did this so I didn't keep putting this wood in one big pile.......I added measurements from both sides of the blade up to 36" either way, these are printed in reverse and on the inside showing through so they will not wear off. I also made a zero clearance insert that …
-
-
- 12 replies
- 5.3k views
-
-
I started getting quotes in December and signed an agreement in March, and now my dream shop is actually becoming a reality. I went with a Lester Building and chose my builder because he quickly answered emails and gave great advice. The building is 30x40 with a 8x40 porch. Here is area where I decided to put the building. The garden didn't do too well there because of afternoon shade. The first day was laying out the site and digging holes. They couldn't do anything more until the county inspector came out to measure the holes. On day 2 they set all the posts and started on the framing. The 3rd day they put up the trusses, purlins, and more …
-
-
- 276 replies
- 67.5k views
-
-
Scored these Dewalt tough totes fairly cheap on amazon. Also got some much larger husky ones, the same they sell at home depot. Anyone use these for storage? I may just build some shelves with dividers the same size as the dewalt ones and stick one in each cubby for added storage. What do you store in your bins,totes etc?
-
-
- 15 replies
- 3.1k views
-
-
Trying to organize every inch of the shop..
-
-
- 8 replies
- 3.1k views
-
-
I think I have nearly got it right, so many factors! Have a look here https://youtu.be/8ARc60Fjh-M if you have a spare 10 minutes.
-
-
- 9 replies
- 3k views
-
-
Hey guys, I'm in the midst of chaos in my shop (garage) since we had new door & windows installed in the outside wall. As a result, I've got everything moved to one side and thought this would be a good opportunity to refresh the paint. I think it's just a couple coats of primer on there now. White's the safe, classic choice, but had anyone used anything else on your shop walls? I want to stay fairly bright, but I wouldn't mind a little color. I'm just trying to think if there's a major downside to putting in something like a light blue...
-
-
- 37 replies
- 7.8k views
-
-
so I spent the week working on my shop rearranging and cleaning things up. I also got a new miter saw. its a ridged miter saw which is a huge upgrade from my old saw. the nice thing about this saw is I can fit a 2" hose to the back instead of the 1.5 that I cant find a hose to fit. so I was planning on making a dust hood to put on the back. and I have figured out two different styles that I think will work. first is a angled dust collection like this I would prefer to have this system but I only have a 1.5 hp dust collector and I am concerned that it would be too weak a machine to work adequately. http://www.thewoodnerd.com/workshop/dustCollection.htm…
-
-
- 3 replies
- 3.2k views
-
-
I spend a lot of time in my little shop - planning, building, cleaning, etc. But sometimes I just take my weekend morning coffee out and drink it there and ponder things (mostly woodworking related). My wife thinks this is weird, ha-ha. Do you ever just go and handout in your clubhouse?
-
-
- 68 replies
- 15.4k views
-
-
I have a pocket hole jig and a dove tail jig I want to make some kind of station for building joints with but it seems like most people just clamp it down to a work bench when they need it and put it away when there done. Anyone seen a joint cuting station designed for these two jigs that will be in a permanent location.
-
-
- 12 replies
- 4.7k views
-
-
This was a minor improvement, but a cool one! I realized that the insulation in my garage door was just flexed into a groove and that that groove had room in front of it, so I used some leftover marker board from an earlier project and cut it to the right size and put it in. To add to it, I used CA glue to put a magnet on a dry erase marker and eraser and stuck them to the garage door next to it. Added functionality and no loss of space!
-
-
- 13 replies
- 4.6k views
-
-
This was how my old little workshop looked like.. I have pretty much ripped the entire thing apart to start new. I'll post pics when it's complete. This was starting to look more like a store than a shop lol
-
-
- 13 replies
- 2.9k views
-
-
Guys, I live in south Louisiana where we drink our air (high humidity). My shop is currently in my garage where I use half and my wife's car uses half. So there's no HVAC system to control temp and humidity. Now to my question: I'm going to build a router table top. I was going to use MDF and basically follow the "Norm Abrams" plan. Should I be worried about the humidity warping or damaging the MDF table top? Or would I be better off using some sort of plywood? With either option, I'm sure I'll face the top with formica or some other sort of smooth countertop material. While on the topic of routers, after I build a dedicated router station, I thought I might a…
-
-
- 13 replies
- 3.2k views
-
-
I've had quite a few successful summers of woodworking with borrowed tools, so this summer I'm investing in the beginnings of my own shop. And there's a lot of questions that come along with that, particularly this one: I'm going to be building a table on casters that will serve as and outfeed table, assembly table, and it'll have a shelf below for storage. But, I'm curious about how precise I have to be with the height of it, in regards to its function as an outfeed table. Obviously it has to be shorter than my table saw, but I wonder how close I need to get to the full height. I'd like to avoid routing out channels for sled rails to pass through, so if I made the t…
-
-
- 11 replies
- 14.5k views
-
-
My mom is a teacher, and every year she buys a bunch of mechanical pencils, and all sorts of random supplies. At the end of the school year she was cleaning out her stuff and she said I've got a bunch of mechanical pencils, do you need any? I said "sure I could use a couple" (a couple to my mom happens to be "2...... dozen") I now have 2 pencils at every machine and about 200 pieces of lead, as well as a bunch of these "Tri-Conderoga" pencils which are rubberized and have rounded triangle shape. They sharpen with a larger pencil sharpener. So I'm just chucking up pencils in my CXS drill and taking them to a little hand held sharpener. Let the shavings commence!
-
-
- 34 replies
- 8k views
- 1 follower
-
-
i want to biuld a table for my standing drill press, and it will include a fence and a stop. i want to add a DC port, but i am having trouble deciding where. behind the fence seems logical, but i also see a lot of examples online of people putting the dust port under the table. i would think that under the table would not collect a lot, as most of the dust is made before the hole is completed by the bit. thoughts?
-
-
- 4 replies
- 3.8k views
-
-
I sharpen on a rig that sets over my shop sink. This washes small but consistent amounts of metal into the drain. I use the sink a lot and worried about losing small parts. I tried some strainers but, given that I clean out glue wells and do all sorts of odd jobs in it, this did not work well. These are commercially available: I added one of these for just a few bucks in parts and an old spaghetti sauce jar. This may or may not be of interest to others but, I thought I may as well toss it out there since it just saved my butt again this morning. It just installs where the regular trap is now. Something gets dropped, the jar screw…
-
-
- 5 replies
- 3k views
-
-
https://www.chairish.com/product/183471/antique-belgian-work-bench
-
-
- 8 replies
- 2.9k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·