The Shop
1,954 topics in this forum
-
So turns out walking on concrete all day is not a good idea for my back. So for the next few days I will be in bed reading up on anti fatigue mats and such. I wanted to get some feedback from the community as well if possible. I live in a very wet state. Western WA near the capital. I have a load of back issues. (Trying to keep this the to long didn't read version) My shop is a regular 2 car garage with slab concrete and 1 big step into the house. The concrete is cracked and moisture bleeds through. I will be patching that up and I want to put padding over it. Looks I don't care about. The absorption is the most important. The better it is the longer I can be out there. I…
-
-
- 24 replies
- 3.6k views
-
-
They've shown themselves to be so useful to me that I pick them up when I see them. Up to 9 now. But only the older ones, though not just the oldest. (The better of the new models weigh more and don't stand well on edge when folded.) Latest find is a Type 2 with 2 items I've never seen before: Vise Cladding on top and outlet strip on the side.
-
-
- 11 replies
- 3.5k views
-
-
Well, if I had waited a few months to wise up I may not be in this situation. I thought I could buy a shop vac, cyclone, container, and some plywood to build a nice quiet dust collector. I should have just bought a dust collector... Well I saw many designs online and none had a lot of ventilation for the shop vac... I thought it would overheat and while it still works it blows my sad 15A breaker instantly (that is my next task.... power distribution...). I am thinking it has a short or something... maybe someone can explain a theory or two on why... The shop vac draws 11.8A. My dad 15A breaker in my garage also has one GFIC socket as well... so the breaker is not blowing…
-
-
- 24 replies
- 6.4k views
-
-
Been contemplating doing this for a while, and decided to go for it. I sold my "stand alone" router table and installed a cast iron router table wing in my ridgid ts3650. For a shop as small as mine, this freed up a lot space for me. I spent a few hours disassembling my saw and adding the wing. Then I prepped the new router insert (jessem router plate) for my big daddy Freud router. For good measure I cleaned up the top, cleaned the blade, and tuned it up. Next I will need to make a shop made fence with DC that attaches to my TS fence.
-
-
- 10 replies
- 7.4k views
-
-
I'm currently taking up 1/2 of our 2 car garage, but my wall space is limited due to my primary wall having two large windows on it, and other things in the garage tend to spill into "my" area. We don't keep a car in there, but we do keep my motorcycle there and enough other miscellaneous items that I can't take over the entire garage myself. So my thought was to put up a temporary wall to segregate my shop from the other half of the garage and give myself some wall space as well. Attached are some photos of the layout I did in SketchUp. Any thoughts on the layout or what I should do differently? Everything is mobile except for the workbench/outfeed table, but I wil…
-
-
- 25 replies
- 6.8k views
-
-
Background: I recently posted about converting my back house into a shop. I'm converting two rooms (about 600 sqft total) and I want to install a wood flooring. Both rooms are currently carpet with plywood underlayment. One room is over insulated sleepers (which I'm hoping to run dust collection under) and the other is on a concrete slab. I definitely know I want to invest in a nice looking wood floor. This space is currently a finished residential space (one room has wainscoting for crying out loud), so my shop is probably gonna end up looking like more like house with woodworking tools in it than a typical shop, but I can live with that. …
-
-
- 16 replies
- 4.6k views
-
-
So I was given the option of a Festool MFT for xmas. I say option, because I could swap something of similar value as the gift. What would you guys do with around $650 if your shop was equipped as follows: Dewalt job site table saw Bosch router with homemade (moderately useful) table and fence 12" dewalt miter saw Dewalt lunchbox planer 10" rikon bandsaw Small drill press I work with a ton of plywood, and am also getting ready for slowly remodeling our horse stables. I was leaning towards a smart table of some sort to make breaking my sheet goods down easier. Unfortunately, the MFT can't crosscut a 48" wide sheet. EurekaZone makes an awesome table, but th…
-
-
- 32 replies
- 7.5k views
-
-
I have been trying to figure out how I could efficiently add some quality storage without sacrificing a lot of shop space. I came across some lab cabinets that were being sold at auction. I now have almost 15'L X 7'H X 16"D of adjustable shelf storage all for under $150! Now I can start pulling my tools and supplies out of the totes I used for moving and get them where I can actually find things.
-
-
- 8 replies
- 2.9k views
- 1 follower
-
-
I am in the process of making a finishing room and plan on putting an exhaust fan in it. Now a majority of the time I use water based finishes and on rare occasions use shellac. But I think in the future I will be expanding my finishing options. The question is do I really need to get an explosion proof fan? There is a huge difference in price when buy a explosion proof fan compared to a regular exhaust fan. Also what size or CFM should I consider. My room is 8x18x9. After doing some research I think I will just use the room to only spray water based finishes which is what I use a majority of there time. I can use my garage to spray other finishes. My pla…
-
-
- 10 replies
- 4.6k views
-
-
So I'm moving my shop into a buddy's garage. It's way larger, concrete floor which is a great improvement, way higher ceilings, and considerably better light. Only problem is that there's a lot of his stuff in the garage. A lot of it's currently on the floor. I'm building some shelves at the moment to move all the crap off the floor. However, it's leaving me with almost no wall space to hang tools etc. So Woodtalk Hive mind - what suggestions do you have for convenient tool storage? I'm wondering if a mobile tool wall will work. Something like this:
-
-
- 53 replies
- 12.9k views
-
-
I recently picked up a Shopsmith DC3300 Dust Collector (new generation) with the large 1-micron dust hood on a steal. I tried my dust deputy (smaller clear one for shop vacs) and the suction drops too significantly because the cyclone unit is limited to 100-150cfm. I want to build a chip collector, and already have a 30 gallon blue rigid plastic barrel with a snap-ring style lid that is nicely sealed. The existing hole where i had the dust deputy is in the center, and already around 3-3.5 inches or so. Under the 3 way junction on the shopsmith, where the 3-2.5" ports meet, is a hole around 4.5" directly in front of the impeller. I was thinking about removing it an…
-
- 6 replies
- 6k views
-
-
Well it's official! The new shop is underway. Materials are on site, and the site prep has started. It's going to be a long road ahead, but the wife can't stop it now! I have been doing tons of research on how to insulate the building, and to be honest, I can't find a whole lot of agreement other than closed cell spray is the only "good" solution and it is by far the most expensive. Anyone else have some experience with insulating a steel pole building? The goal isn't to keep is 100% climate controlled all the time, which I know causes some of the moisture concerns with fiberglass. We are in South Eastern Wisconsin, so we get a little bit of every kind of…
-
-
- 103 replies
- 25k views
-
-
What is the ideal humidity range for a woodworking shop?
-
-
- 15 replies
- 3.6k views
-
-
I keep thinking that I am getting ready to say that my DC is in it's final position and run some solid ducting. Well I just scored some very nice old wood lab cabinets that I am going to use for shop storage so my layout is again changing. Until I get it all set I want to get a good 20' section of 4" flexible ducting that I will just drag from machine to machine for a while. I want to get a good quality hose since I will eventually use it for my permanent connections from rigid drops to my machines. So with all that said who has the best combination of quality and price on some 4" tubing?
-
- 7 replies
- 3k views
-
-
Over the past few days I've been watching a bunch of Luthier videos and today saw several suggestions for using Titebond 50 when gluing on guitar body. Before today I'd never heard of Titebond 50 but a quick Google search confirms such a product does in fact exist - http://www.franklinadhesivesandpolymers.com/Wood-Adhesives-US/Wood-Adhesives/Product-Family/Titebond-Family/Titebond-50.aspx Has anyone here actually used this product and/or know where it can be purchased?
-
- 1 reply
- 3.3k views
-
-
Just thought I'd post a couple pics of the saws used by the cabinet shop I work for quite a bit. The saw table pic isn't the best because it has lumber on it. All the saws have air motors. 2 SawStops. The left one has an outfeed table/scrap bin where they break down full plywood sheets.
-
-
- 3 replies
- 3.4k views
-
-
Got my 735 planer running (yes, until I get more hose, I'm using basically a pillow case. ). I plan on making a mobile cart for it, with drawers underneath. Going to be using 3/4" ply for the structure and 1/2" for the drawers. I'm planning on cutting dado's for the drawer runners, instead of sliders. The dado's will be at regular intervals, allowing me to make modular different height drawers. I'm going to later make a new stand for my drill press, and want to make it the same size, so the drawers can be interchanged between carts if desired. Both carts will be mounted on locking casters, as I'm renting this place and mounting to the walls is pretty much a no …
-
-
- 4 replies
- 3k views
-
-
I thought it might be fun to chronicle the development of my workshop, see what you guys think, maybe get a few pointers, maybe give you all some ideas, and so on. So here we go! I'm going to just go ahead and do this chronologically. CHAPTER 1: BEGINNINGS We got a house in July of 2014, and my gracious wife gave me the whole 2-car garage as a workshop. The space is roughly 18' by 18' with a 16' garage door on the west wall, about 16' of pegboard on the south wall, two doors on the east wall, and the circuit breaker box on the north wall near the east corner. Prior to the move I had used my dad's garage, used my wife's dad's garage, and (laughably…
-
-
- 28 replies
- 12.2k views
-
-
I just saw this on Ask This Old House where Tom goes off to Chicago to help set up a small workshop in a one car garage. Some good ideas in this episode if you have a small space. It also looks as though the episode may have had a connection (sponsor maybe?) to Bosch blue. I noticed the glide saw with its fancy pivot mechanism and the saw is becoming very popular due to its very small footprint.
-
-
- 16 replies
- 5.4k views
- 1 follower
-
-
I am looking to build a new rolling table saw cabinet with a built in router table. I was hoping some of you would be willing to lend your experience and thoughts on what features should be included. I want everything needed for both of these tools to be accessible at all times from this cabinet. I have a fairly good start on it. Here is what I have on the list to be included or storage to be included for: Saw blades Router bits Fence storage for both Sled storage Miter Guage storage Infeed riggers that slide out from the front for full sheets of plywood Blade stop too wrenchesl for changing blades Dust collection Pencils…
-
- 5 replies
- 2.9k views
-
-
I have a Jet dust collector in my shop and would like to do some research on how to make it work better. I have drain tile for runs right now and the longest run is about 40' and that is to the table saw. I am looking at using pvc and not steel. Is there some sites with some good info on them? I searched here but never really came up with something specific. There has been a bunch of shop vac posts lately. Thanks for the help! Edit: I have a very small shop and a cyclone unit will not work in my shop
-
- 7 replies
- 3.6k views
-
-
I've been reading the thread about CA glue storage using a refrigerator and I got me thinking about other uses for a refrigerator in the shop. Beside the obvious use for cooling beverages are there other legitimate shop uses for a small refrigerator?
-
-
- 16 replies
- 4.1k views
-
-
I apologize if this has been answered and beaten to death already, but I couldn't find anything in a search. I've been looking at used table saws online to consider upgrading my jobsite saw. In my searches I started to find references to 3-phase saws. I understand the basic advantages of the 3-phase saws (power, torque, etc...), but not sure if I would ever benefit from those advantages to justify the modifications that would be necessary to accommodate 3-phase machines. I don't current have 3-phase service in my shop, so I would have to have it installed. I imagine that alone is very expensive. If I did have 3-phase service, it would give me a broader s…
-
-
- 10 replies
- 4.1k views
-
-
i have a heated shop that was built pretty tight in 2007, i had no trouble with mice, till the last two years and this year its been worse. i had several cargo blankets stored on a shelf and under a cart.. which have become the building blocks for the mice to make there living quarters.. i have put out ramik mice and rat feeders and also some decon packs about 6 weeks ago, i never had trouble in the past but i do now.. i had cleaned out one drawer that had chewings from the blankets and thought i was going to get control but went out today to look for some wire and found they had rebuilt and also got some fiberglass from the walls.. which are all covered with OSB.. any id…
-
-
- 44 replies
- 9.7k views
-
-
As someone with a rather thick and full beard, I have obviously been having trouble locating a dust mask or respirator that is compatible with my face. I've seen these... (and maybe this is my only viable option) https://www.amazon.com/Resp-O-Rator-Dust-Respirator-Model-JR-7/dp/B002KA0CMO Any other solutions? And, no... shaving the beard is not an option!
-
-
- 42 replies
- 31.9k views
- 1 follower
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,009 Total Members
- 3,644 Most Online
-
Joseph b Newest Member ·