Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Shop

  1. Started by Mike T,

    I'm getting close to doing some extra wiring in my shop build. My portion of the building is 22'x30' of an existing 30'x50' metal building. It was already nicely wired with a good amount of 110v outlets on 20 amp breakers and 1 dedicated 220v outlet on a 50 amp breaker for a welder. My plan is to run a new 110v circuit for lighting a dedicated 220v 30 amp circuit for future AC/heater mini heat pump and a 220v 30 amp circuit with 3 outlets (stubbed down through the ceiling) for 220v tools (I'm a one man show so only 1 big tool at a time will be running on this circuit). I don't really weld much so I'm thinking of coming off of the 50 amp circuit and dropping it down …

      • Like
    • 21 replies
    • 5k views
  2. Started by Cygnus A,

    Here is the first of many shop projects I have planned. I didn't take pictures during the build of this mainly because I was figuring it out as I went and my shop/garage is a wreck right now until I actually get storage built. I already had the JessEm router lift and Bosch router that was previously mounted in my sawstop extension. Fence: Incra LS Super System (17" version) Top: Incra 27x43" (top sits 35" from floor) Lift: JessEm Rout-R-Lift II Router: Bosch 1617 Box: 24x29.5x40", 3/4" ply, domino constuction, edge banded using 3/4" poplar Drawers: 22.5x20" and 15x20", 1/2" ply, dado construction, 3/4" poplar false fronts, KV TT100 d…

      • Like
    • 17 replies
    • 4.7k views
  3. Started by bushwacked,

    These are one sale again, like always. https://www.woodpeck.com/portamatestoragerack.html?_bta_tid=18014360385476421803960484186606120963643805015744201440505635502384651345012072329328318365378664833307&_bta_c=59omsllf6uaz9uhg0kz6nn465azd7 I was thinking I may now get them or maybe 2 but I cant figure out how much weight they actually could hold. They say: 100lb capacity per level ... to me that does not seem like all that much when you start stacking wood. Should I look into get maybe 2 sets, so I would have 4 columns and giving me 200lbs per level .... if that is how the math actually works out??

      • Thanks
      • Like
    • 13 replies
    • 3.6k views
  4. Started by Dhankx,

    I just got a respirator and in one of the reviews someone said to store it in a large plastic bag when not in use. This makes sense from one standpoint, but from another standpoint I would think that the moisture from breathing in it would then cause a bacteria problem because it wouldn't properly dry out. Thoughts / suggestions?

      • Like
    • 33 replies
    • 12.1k views
  5. Started by Jsmims,

    Well this is my shop so far, been building it up from a 20x15 garage. I'm very happy so far just wish my pocket had some more hundreds well thousands realistically but on a good path as of now. Made my own router table after I looked around at the prices I only have about 175 into it and that includes the harbor freight router and speed control. The laminate I had laying around from a job that I did a while ago.. I returned the Hitachi table saw because I wanted a bigger shop saw the Hitachi was nice though

      • Like
    • 14 replies
    • 4.6k views
  6. Started by Llama,

    As many of you know I have moved to the green state of Colorado . We decided to rent for the first year because we didn't know about the area, and wanted to be able to make the best decision on where to live. The prices of houses out here are much higher than we were used to in Wisconsin, so messing up would have real consequences! We were driving in Timnath, and spotted a new subdivision popping up. Timnath is just south of Fort Collins, same county but the rural part of it. The area is booming. in 2010 there were approximately 700 people, now there are over 3K and growing. And property isn't getting any cheaper. So, we decided to put an offer on a new house that was nea…

  7. Started by Richiep,

    No, not that kind of micro dots... I'm building a miter saw station that I want to put laminate on. I've read about this microdot stuff which is supposed to reduce friction, something like what Kreg uses on their router tables. I found this stuff which looks like what I'm looking for; a little pricier than I'd like... https://www.cabinetmakerwarehouse.com/catalog/white-formica-laminate-4-x-8-sheets-microdot-finis/ I'm just reaching out to see if any of you have experience with this kind of laminate for this kind of application. Thanks! Rich

      • Like
    • 12 replies
    • 4.6k views
  8. Started by rodger.,

    Anyone have one of these in their shop? i considered the previous version, but never bought it. Oneida says it runs at about 600 CFM with HEPA filter and 10' flex hose attached. I am thinking about upgrading from my delta 50-760 with one micron bag. The delta works just fine, but I am tired of the single stage unit - its MESSY to change the bag, its filter bag is only 22 sq feet in surface area (and HUGE). I would also like better filtration. I thought and planned a potential spot to vent my current collector outside, but its not likely to happen. My neighbors are too close, and will probably not tolerate the noise. The mini-gorilla would he used for my …

      • Like
    • 20 replies
    • 10.2k views
  9. Started by woodwhisperer,

    After my "Dream Shop" post, the commenters got me thinking the flooring should be an issue I tackle right away. I always planned on doing something with the floor, but at a later date. As you can imagine, the costs for a project like this are extensive and I am already stretched beyond my comfort zone on the budget. So my goal is to find a budget-friendly solution that doesn't look like a heap of poop. While looks are indeed important, I have to admit that they are secondary to comfort. So things like epoxy, paint, rolls of plastic flooring material, etc... are all off the table. I also do not want to build a floor with a significant elevation. Lastly, I live in Arizona. …

      • Like
    • 58 replies
    • 42.1k views
  10. Started by LazarusDB,

    Hi, I just got a new Grizzly table saw and it comes with a 6-15 type plug. The plug on the outlet I have (installed by previous homeowner) is a L6-30. Can I simply swap it out with a 6-15 to match to plug on the table saw? Thanks.

      • Like
    • 5 replies
    • 5.6k views
  11. Started by Dhankx,

    I'm wondering if any of you have used an app to help layout your workshop? I just setup a new jointer , planer and router and now I need to kind of get things organized before I setup the dust collection

      • Like
    • 10 replies
    • 3.7k views
  12. I haven't opened my sliding door for a few months. I unlatched it and tried to open it yesterday. That's when I discovered THE PROBLEM. Anyone see it?

  13. Started by -MattK-,

    After a prolonged wait, my new woodshop is going up today. To help others, I'm happy to share details on the long process that got me here, but in the meantime, I've temporarily made our nest cam in the attic overlooking the site available to the public here: https://video.nest.com/live/hNIhQB Afterwards I'll put together a video on the assembly. It's a pre-fab building, so the walls and trusses were assembled offsite. The crane is expected around noon eastern time if you want to see how it all goes together. Best, Matt

      • Like
    • 230 replies
    • 49k views
  14. Started by FrankMatz,

    Quite some time ago I remember seeing plans for a Shop Vac with Cyclone cart from one of the magazines but for the life of me, I can't remember which magazine and I can't seem to find any reference to it. I seemed to remember liking some of the features of it and remember even seeing it in a "youtube" video after someone built it. But again I can't find that ether. Anyone out there remember the magazine and issue. I'd like to see if I could buy the plans through download. I have thought of just designing one but then why re-invent the wheel. I'll just use their plans and make whatever mods I think of. I'm hoping it is low enough to fit under the wing of my table saw as th…

    • 11 replies
    • 46.1k views
  15. Started by Marcus Hand,

    I live in NE Florida and summers in the shop are beyond hot. We have a 3 car garage and my wife uses one of the bays. Over the winter I built a dividing wall between my shop and her bay. I insulated the wall. My plan was to get a mini split installed before summer. I didn't realize that it is near impossible to find a company around here that will install one. Every company I call has blown me off. The one company that did say they would come out and give me an estimate, never showed up. I'm now leaning toward just installing it myself. I'm comfortable doing most of the installation, including the electrical part, but the evacuation of the unit is what I'm concer…

      • Like
    • 36 replies
    • 10.4k views
  16. Started by Klappco,

    I have been needing an out feed table for my saw for quite a while. A couple of days ago I had the idea to use my flip top planer stand as the base for it. Mostly made of scrap but I did buy a 2'X4' piece of 3/4 MDF. Used some scrap 4X4 fir that had notches in them. These were misfits from my bench project that I had to remake. Then I added some 2x4 fir with glue and screws. The notches will be handy later on. Gluing and screwing on the 3/4" MDF sheet. Cut it to 24X30. Then I glued and screwed 1/4" plywood I had on hand. Then glued on 1/8" hardboard and clamped like crazy. No screws on the top. With that combo …

      • Like
    • 3 replies
    • 3.3k views
  17. Started by Richiep,

    Hey All, I've been wanting to build a real miter saw station for a long time. And every time I want to use the chop saw I have to set up a table, pull the saw out of storage, run an extension cord, look for some kind of shop buddy; usually a step ladder or stool... Right now the miter saw is the dustiest tool in the shop! This is despite trying to collect dust from the 2 inch port on the saw which only sucks up a small portion of the dust. It's time to do something better! I thought I'd share some of my research and thoughts. I'd appreciate any and all feedback. I've googled the subject many times and I'd say the best I've seen comes from Jay Bates …

    • 0 replies
    • 3.2k views
  18. Started by Richiep,

    Hey All, I recently opened up my Jet bandsaw to discover it was jam packed full of dust despite my use of dust collection, I poked around and discovered that the factory dust port has a super narrow slit which was also full of dust. That explains why this machine has been so dirty lately but that dust port seems like a design flaw. So I'm looking for advice on upgrading the dust collection on this 14 inch bandsaw. Thanks! Rich

      • Like
    • 5 replies
    • 10.9k views
  19. Started by Clay@sprucecreations,

    I just moved into a new house that has a 25x30 pole building in the back yard. I just had electricity install and I'm in the process of laying out all my tools. I think I'm going to go with the table saw in the center and outfield tables surrounding it. Any tips you guys may have on laying out the rest of my tools? I have a band saw, planer, drill press, miter saw (with station), assembly table (4x8), jointer, and all the hand tool. I am a hobbyist as of now but looking to go full time in the next year. Thanks!

      • Like
    • 9 replies
    • 4.3k views
  20. My shop is a cluttered two car garage barn. All of my large machines are on wheels and I am having to move these machines quite often. Due to the portability issue, hard piping to the dust collector (which is also is wheels) is not feasible. The hoses are constantly being dragged across the rough concrete floor and I'm concerned about damage to the hoses. What would be a good medium to protect the hoses from the concrete floor? Duct tape, some type of abrasive resistant wrap? I don't have any damage yet but would like to address the issue before it becomes a problem. Any suggestions would be appreciated. Steve

      • Like
    • 11 replies
    • 3.6k views
  21. Started by Derek_PNW,

    Starting a thread about my my micro wood-shop. I have about 15'x8' of work area in my tandem garage. Both cars have to park in the garage otherwise I would have a little more room. But all in all, I am a happy camper inside my tent of a wood-shop! Today I wrapped up my workbench (pictures coming) and my dust collector. My workbench is inspired by. . . well a lot of different people's workbenches. Paulk's and Jay's to name a couple. I just needed a large workbench with storage since there is no space for cabinets and such on the walls. Like I said, pictures to come. I also finished upgrading my shop-vac driven dust collector to a Grizzly 1HP blower driven dust collec…

      • Like
    • 121 replies
    • 30.1k views
  22. Started by Klappco,

    Been slowly remodeling the old garage so I can work stationary and not have to wheel everything out into the car port to work and then wheel it back in at the end of the day. Problem is that this old building is not built very well. 48" on center 2X4 framing. Funny thing is that the roof is 24" on center. Thus I have been adding studs and insulating as i go around the room. About 57% of the way done worked on as my messed up back allows. Putting plywood on the walls. Built large (8' high X 24" deep X 8' long eight door) adjustable shelf cabinets to contain some tool and all the storage stuff we have. I posted the clamp racks a couple of months ago. Now h…

      • Like
    • 71 replies
    • 15.5k views
  23. Started by Redfish,

    Guys, is there a limit to how many bends you should have in the piping coming from a dust collector? Or is the main concern keeping the connections as air tight as possible?

      • Like
    • 5 replies
    • 3.2k views
  24. I don't often go to Harbor Freight, but my wife wanted to look at their storage containers, do I went along. There was a stack of small furniture dollies for about $11. It seemed like a good deal even if it's for the casters. I bought one and when I got home thought it might work as a substitute for a Festool cart. I have one that works great , but spent about $85 I believe. By just using couple pieces of 3/4" ply against the padded supports and a piece of 1/4" ply with appropriate cutouts to fit against the bottom of the systainer, my Harbor Freight Festool cart works great. Just thought I'd share it in case it would help someone else, 'cause I've recieved so many h…

      • Like
    • 9 replies
    • 5.1k views
  25. Started by lewisc,

    Any recommendations for band clamps? I'm looking at these Besseys so far. https://www.carbatec.com.au/clamping-vices-and-workholding/band-clamps/band-clamp-w-4-vario-angles-bessey Or these Rockler ratchet clamps which are half the price.

      • Like
    • 10 replies
    • 5.7k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.