The Shop
1,954 topics in this forum
-
I miss having a proper shop and my stationary tools (which are in storage until we get the new house built), but I have managed to scrape together a decent work area in the basement to help facilitate the major remodel we're undertaking in the current house. My traditional workbench is also in storage so I decided to crank out a version of Josh Finn's workbench from FWW. It's made of two beams (plywood + melamine, with soft soundboard on one side) and some sawhorse/work tables. They are far from perfect as other obligations put me on double-time construction mode, but they will do. The house we bought was a minimally-maintained rental for years, then a hair salon for a de…
-
-
- 9 replies
- 6.1k views
-
-
Old faithful had almost nothing left of the sole, so it was time to put her out to pasture. And, clocking in with a sporty, two-tone paint job courtesy of leftover interior latex left by the previous homeowners, a trio of newcomers waiting for their first cuts. So, this had me wondering: How far will you push a push block? Surely I'm not the only one who's taken it down to the point of chewed-up silliness like this.
-
-
- 17 replies
- 6k views
-
-
This is the ugly truth, I have way too many benches and cabinets and I need to reorganize the shop so that I have more room to move projects around. I should add that I am not a fan of mobile bases so I like the machines to be stationary. There is a lumber rack on the left wall where it measures 13'3" Any help or suggestions would be greatly appreciated. Thanks John
-
-
- 6 replies
- 3.7k views
-
-
As I'm heading out of town tomorrow for work, I had a little shop time to kill. I had a couple drawers that I just hadn't given much attention to so, thought it was a good quick project to kill some time.. No video on this one, all that equipment is put away. Hand Tool Drawer: This stuff was all pretty much loose before, and now this with a little 1/2" ply and some simple tool holders from the big box store. And then this drawer full of "stuff" that just really needed a home.. Just dividers built out of left over 1/4" ply. Not even glued in.. Some may notice that this drawer is where the dado stack was in the old shop.. Yep, that's an up…
-
-
- 13 replies
- 4.1k views
-
-
Got a few projects under my belt in the new shop now so, am feeling pretty good about the work flow. So, here's the first official shop tour in the new shop..
-
-
- 33 replies
- 9.5k views
- 1 follower
-
-
Greetings All, Sharing my first shop build, would appreciate any constructive feedback or tips(even though its already mostly done) At this house there isn't quite enough space in the garage for my wife's car and my desire to work on projects. So some extra garage space is being built to help with projects and my new taste for wood working. The spot the building is going on is right next to the house, however this area slopes about 2.5' so I built a small retaining wall to help provide a level surface surrounding the building. I ended up building a retaining wall that encompassed an area that was much larger than really needed, somehow I did not plan t…
-
-
- 16 replies
- 5k views
-
-
I've been reorganizing my shop needed to cut some round tennons (store bought dowels didn't fit tight in standard holes) so I decided to turn then on my lathe using the old open end wrench for a gauge trick, time consuming required two hands pain in the butt I needed a more efficient way as I had a lot to do. Here is the trick I went to my junk drawer found an old wrench cleaned it up a bit, ground one leg of the open end wrench to a sharp edge more of a scraping angle than a cutting angle I cut the tennon on my lathe about a 1/8" short of the tennon thickness than used the wrench as a turning scraper and was able to make perfect tennons rapidly able to use both hands on …
-
-
- 7 replies
- 3.5k views
-
-
I have been looking for a good deal on a Unifence for years and today I finally got one ($50 for a saw with rails and two fence heads). I want to replace the t-square fence on my SawStop (I have always hated those style fences). I know there are a few people who have done this and was wondering if you could give me some pointers. Thanks!!
-
-
- 15 replies
- 6.6k views
- 1 follower
-
-
For those of you who don't know about these check this out. Great way to sand moldings etc. https://www.ptreeusa.com/edirect_051818_mop.htm
-
- 3 replies
- 3.2k views
-
-
I’m writing this thread to encourage those of you who know you need to make some shop changes but have been putting it off. It seems like a chore when you think about it, but once you get started it’s actually a lot of fun. My shop is a 12x24 stand-alone building. It has always seemed small, tight, cramped. I bought a couple of new machines so it seemed like the right time to do some resetting and changing. The fact that the first new machine didn’t fit exactly the way I wanted it to was also a factor. Lesson #1 - if you’ll go spend money on some new equipment, you’ll enjoy the reset more i started out with a list of frustrations most of which you can see in th…
-
-
- 27 replies
- 9.7k views
- 1 follower
-
-
VinnyJoJo found a deal on machines and offered me first shot at the dust collection system. Guy got transferred and was liquidating the whole shop. Pipes never got hooked up to any tools, twin HEPA filters new in the box. Parts in boxes that I have no idea where they go. 7" pipe sections and several ells. 5 hp is probably way more than I need but who can pass up new equipment with all the accessories at half price ? 4 hours to break it all down and barely fit it all in the van. Completely forgot to take any pictures other than to document the wiring on the starter/control box. I even scored the 220v cable that ran the whole length of the house. All the weight on those big…
-
-
- 30 replies
- 8.8k views
-
-
At this point my garage shop has worked. With everything on wheels there's no problem when it comes to space. What I'm running into now is the efficiency question: How to arrange things so that workflow will allow me efficient access to each machine. That ... And I'm seeing how a full product workflow is developed. There are times when I might want to mill everything up front and times when I want to do it in stages -- depending on the materials and project. The traditional IT approaches to workflow don't seem to fit.
-
- 6 replies
- 3.5k views
-
-
Hi – I’m new to the forum and to woodworking in general. We’re getting ready to build a new house where I have the opportunity to build a small shop. I’m hoping I can bother some of you all for input on your mistakes an triumphs in designing my small shop space. The types of projects I’ve been doing for years include speaker building. Usually smaller bookshelf and the occasional floorstander. For these projects to date I’ve gotten by with using my table saw only as far as stationary tools go. It does mean that I’m working with large sheets for many projects, but I also have a Makita tracksaw that I usually use to rip down the big pieces. I also would …
-
-
- 14 replies
- 4k views
- 1 follower
-
-
Bought a cheap 1hp single stage dust collector from Big box store. (Premature maybe) have since put together a nice little system with dust deputy. I can’t seem to find or maybe correctly name the 2 stage ring section? Or is just a 5 micron bag sufficient?
-
-
- 15 replies
- 4.9k views
-
-
Here is the before pics. I have a bad habit of not putting things away. It adds up over time. Cleanup starts tomorrow. Last pic is lumber to make shelves I had outside in the rain and brought in to dry overnight.
-
-
- 23 replies
- 5.5k views
-
-
So we are moved in and more or less settled. We are so happy at the new place. The last few weeks has been a serious whirlwind. I've taken a few pics of the shop tear down, the shop move and now starting to setup the new shop. We got the keys a week before we moved so it gave me a chance to do some renos in the house and build a new shop floor. The new shop is a standard double garage, (20x20) not huge but doable. Here is a pic of the new space. There was a fridge and some cabinets in there that I had to get rid of. The last shop was smaller and it had the stairs and landing inside the…
-
-
- 118 replies
- 33k views
-
-
Hey guys, I'm new here and I was just looking for any advice about the shop I'm planning on starting in a few weeks. I'm going off of the 12'x16' shed plans from Construct101.com. I'm going with this size as 200sq feet is the limit without getting a permit, and talking with some neighbors, the area I live in just sounds like more of a hassle than it's worth. I can get by and keep some of the larger tools in the garage. Instead of doing a wood floor I'm going to pour a concrete slab. My yard currently has a about a 1' slope, so my plan is to start in the middle, scoop up the high side(renting a skid steer) and use it to fill in the low side, to level and flatten,…
-
-
- 46 replies
- 9.9k views
-
-
I just added a new DC to my shop. Im planning to get some 4” pvc to hard pipe it. I have a few questions: This is the new shop setup. My new Rikon 10-326 bandsaw is going to be between the jointer and DC. This is the pipe I was using before. I’m going to replace the blast gates (another question down the line) As you can see, the black pipe runs from my table saw under the outfeed/assembly table. It’s about 7’ from the back of the saw to the back wall. Do I need to replace the black pipe with pvc or can I just run this to the pvc at the back wall? What I mean is will I improve the efficiency enough by running pvc all the way to the machine to m…
-
-
- 26 replies
- 8.2k views
-
-
All, I've benefitted so much from watching others' shop tours that I felt it was time to finally share one of my own. My shop was clean for once, and I was just about to rearrange, so I did a before and after. From what I can tell, I may have pushed the limits of having the most machinery in the smallest space... (which I think is a factor of the shape of the room AND the fact that I don't really store any lumber). Anyway. Here you go... this is the first Youtube video I've ever posted! Thanks for watching... and I'm happy to answer any questions if I can! --Thiel
-
- 4 replies
- 3.8k views
-
-
Hi everyone, I just moved to a new place which has a great space for setting up a shop, and I've been eyeing the Clear Vue CV1800 pretty much since I started watching TWW back in 2013. Since moving I've been doing some more research on the unit and I wanted to ask this question to Marc and others who have set up their cyclones to vent outside the shop - if you vent outside, have you had any problems with the cyclone pulling air and fumes from HVAC ducts? The room that I want to transform into my shop has a single heating vent duct that has a flap that can be manually closed from the furnace room, but of course that isn't airtight. If I were to set up a CV1800 so t…
-
- 6 replies
- 4.3k views
-
-
I’m resetting my shop due to some new tool purchases and have decided I need to put my D-20 jointer on a mobile base. I find some Delta 50-276 bases for around $90 but is there one you recommend that’s better even if it costs a few bucks more?
-
- 4 replies
- 3.2k views
-
-
I seem to remember someone on here mentioning a stand they had built that would hold more than one piece of equipment. Where you could rotate one piece out of the way while using the other. The two pieces I have in mind are both sanders, a belt/disc and an oscillating spindle. Anyone have any ideas?
-
-
- 34 replies
- 10.2k views
-
-
The day job is a bit slow this week so I had some time to knock out a couple of improvements long over due. Flip top Planer/sander cart. Not sure where I originally saw this design but I think quite a few people have used it. Crosscut sled. Kind of a hybrid between the James King and James Hamilton designs.
-
-
- 13 replies
- 4.7k views
-
-
I have used these casters in my shop and they work quite well. http://www.ptreeusa.com/edirect_030218_casters.htm $26 for (4) 4" casters, 2 swivel & locking, 2 straight fixed This configuration works well when you don't want something to drift diagonally while moving. They have several other sets available. These were just what I was familiar with.
-
-
- 17 replies
- 4k views
-
-
I want to share some of the changes that I made to my workshop for this year. I had set up my workshop with old American heavy iron by Northfield. I used them for about 2 1/2 years and loved them. As I began to spend more time woodworking, one issue that became more important was dust collection. Northfield makes awesome tools but dust collection is not their strength. So began my mission to change my shop. Here is the starting point: After some research of lots of factors, I chose to replace my tools with Felder tools, which are known for precision, excellent build, and amazing dust collection. They are also pretty good when it comes to service. So, ov…
-
-
- 44 replies
- 11.5k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,009 Total Members
- 3,644 Most Online
-
Joseph b Newest Member ·