Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Shop

  1. Started by Gnr4791,

    HellO Anyone have any guidance on buying a portable workbench? I’m not a pro, just for hobby only and mainly using hand tools and circle saw. I saw the one in the link below in a video that Paul Sellers has on YouTube and thought it must be good. Thanks. https://www.homedepot.com/p/BLACK-DECKER-Workmate-425-30-in-Folding-Portable-Workbench-and-Vise-WM425/202516382?cm_mmc=Shopping|THD|google|&mid=sSYfwJVLK|dm_mtid_8903tb925190_pcrid_195274179091_pkw__pmt__product_202516382_slid_&gclid=CjwKCAiA8bnUBRA-EiwAc0hZk2W68wYLJ1_EsqzP4YuL-zh4l5UWRHEtDVbhhEWdUjQ6AOLjcF0blxoC_jAQAvD_BwE

      • Thanks
    • 7 replies
    • 4.6k views
  2. Started by JosephThomas,

    Moved to a larger shop space, trying to draw out some ideas for shop layout. It's a great nice big space from what I'm used to, super excited...however, I'm renting this house so the odds say we're only likely to stay 2-3 years, so keep that in mind with any suggestions. Also, my wife enters the garage to do laundry, so it's in my best interests to keep a clear path from the laundry back to the house Also, all this stuff is in a fixed position, and can't/won't be moved. --> Water heater, water purifier, laundry, sink. Also not going to move the door locations obviously Owner also has a moderately sized "bench" up against the right wall that I'm not likely …

  3. I am in the process of building a combination workbench / assembly table for my shop. The basic construction of the bench is 2x6 & 2x4 framing with a double layer of 3/4" plywood for a top and a tempered hardboard work surface. My plan is to install two drawers that will hold a variety of items including screws and fastening hardware, handtools and a variety of other items. Given the size of the drawers and how quickly the weight can add up, I would like for the drawers to be strong and heavy duty enough to support the load without sagging or failure - though at the same time economical to construct (thus no fancy drawer slides or hardware). Each drawer …

  4. Started by TheFatBaron,

    Hi everyone - After relocating to the PNW last summer, I'm finally getting around to a fun to-do item: resurfacing the workbench in the shop area of the house we bought. It's simple plywood and 2x4 cabinetry - incredibly stable, and the right size along the length of the way - but the surface itself is nowhere close to flat. The seams between the old plywood are up to 1/8" out of flat. The easiest thing for me to do would be to drop a 3/4" sheet of ply over top, screw it down and call it a day, but then I worry about the ply flexing under load as I do hand planing or something. Otherwise, I could shim the worst of it before screwing it down, or go thicker with an ac…

    • 3 replies
    • 3.6k views
  5. Started by Marcus Hand,

    I bought a used JesseEm router table about a year ago. I couldn't stand to see all the wasted space!

  6. Started by Pwk5017,

    As the thread title suggests, this will be part shop tour and mostly a request for organizing around the last piece to this shop--a slider. Ive wanted a true european slider ever since i had a jessem mast r slide on my delta contractor saw. It wasnt dead nuts accurate, but it transformed the table saw into a wonderful tool to use. I could only ever imagine what it would be like to have a properly designed slider one day. I wrote off those dreams for awhile due to budget and space constraints. Here I am 4 years later and suddenly it doesnt seem like that distant of a dream. In fact, the only thing stopping me are the right used machine and space in my basement. In comes th…

      • Like
    • 14 replies
    • 4.6k views
  7. Started by Jeffm510,

    Hello, I have the chance to layout a 3,000sq. ft shop from the ground up. It's a blessing and a curse. I am pricing out a "pre-made" air hose system-one of the "Blue" ones and the price is silly. Does anyone have any feelings or thoughts on using 3/4" PEX tubing for the main line and the drops? Using PEX I would be able to create a ring main and add more drops for a 1/4" of the price of the "Blue" systems. PEX is better than PVC, but is it good to go? Thanks, Jeff

      • Like
    • 23 replies
    • 8.9k views
  8. Started by collinb,

    New information just keeps popping up. The term "chip collection" gets thrown around from time to time. I wondered if it was a designation out of convenience as I'd not seen the term used on hardware before. Until now. https://columbus.craigslist.org/tls/d/logosol-3-kw-dust-collector/6444028301.html

      • Like
    • 5 replies
    • 3.3k views
  9. Started by JosephThomas,

    What is the best way to get sound insulation in a garage shop? I'm in California, so temperate weather, most garages here have zero insulation in the walls or up in the rafters. The walls on this garage have stucco walls, 2 layers of paper, then 2x4 studs. The roof is asphalt shingles, paper again, some 2x underlayment, then the rafters (no dropped ceiling or anything like that). I do not need/want to do any kind of insulation for the sake of heating/cooling, simply trying to add enough sound dampening that I could work later at night without disturbing the neighbors. No shared walls, but the neighbor's house is <10 feet away. Is the best route to just add …

  10. Started by Lprice2011,

    I am starting to build up and replace tools I currently have that were given to me. I have been seeing some woodworkers use T Tracks in their benches to hold down work, add a fence for router table and a plethora of other things. Why wouldn't more people utilize these of they seem so helpful? Or are they not all that useful? Any thoughts or insight would be great.

  11. Started by new2woodwrk,

    Here are a few pics of my attempt at dust collection for my tool carts. And here are my Eureka moments - may help someone else? I have 2 machines with small dust ports. I just happened to try an old piece of hose I had laying around and what do you know... EUREKA! It worked. The secret is... It's a pool filter hose! One side fit into my Skil Band Saw and the other fit the OD of my HD sander I know it's a jerry-rigged system but I hooked it up to my shop vac and it works - that all that matters to me

      • Like
    • 4 replies
    • 3.4k views
  12. Started by Dknapp34,

    Anyone own this, or a similar, unit: http://www.woodcraft.com/product/815488/jet-air-filtration-system-model-afs1000b.aspx It's on sale now and I'm considering getting it for my basement shop. I have an Oneida 3hp cyclone, which does a pretty good job of collecting dust at the source, but there's no way to completely eliminate the fine stuff from getting in the air, so I thought this might be a good addition. Especially since I'm in a basement.

  13. Started by Wimayo,

    Every once and a while, I have a need to do some metal work. In the past I have been able to do some acceptable brazing on light metals with MAP gas and flux coated brazing rods. However, this has definite limitations; not that I ever need to do anything real heavy duty. I think my needs would be met if I could find something hot enough to braze two pieces of 1/8" mild steel together. I've peen tempted to buy the little systems that include a bottle of MAP and a bottle of oxygen. I guess they give a hotter flame to work with thicker metals. But, I understand, the oxygen only lasts for about 15 min and is rather pricey.. I know that welding these days uses mostly MIG or T…

      • Thanks
      • Like
    • 28 replies
    • 9.8k views
  14. Started by noshopbob,

    I'm thinking about getting a Woodriver 4-way clamping system for panels. However I have never seen anything pro/con about these on this site. Are they worth the investment of $33? I struggle with keeping everything flat and square, thinking this may help.

      • Like
    • 7 replies
    • 3.5k views
  15. Started by Richiep,

    Hey All, I'm doing some organizing in a pole barn for a client and I;m setting up a workbench and maybe a pegboard. I've installed a fair amount of peg board over the years and it's been okish. I once worked with a guy who absolutely hated pegboard and he set up his shops with a vertical sheet of plywood. From there he drove screws to hang his tools and oultined them. Since then I've always wanted to try it. I think I'm gonna give the plywood method a go for my client and hope it works out. What are your preferences/experience? Thanks! Rich

      • Like
    • 31 replies
    • 25.3k views
  16. I am building a nrl shop next to our house and want to bury plastic pipe in the new floor. I plan on wrapping it with stranded wire to ground it. Any thoughts on this concept. Shop will be 20x30.

      • Like
    • 17 replies
    • 5.7k views
  17. Started by PWRFULZ3R0,

    Bought the JET AFS-1000B on amazon on black friday and now that I have it, I'm not sure where to put this beast. From other threads I've read, the consensus is 1/3 the distance of the overalll length of the shop, and not lower than 6' or 2/3 the height, or something along those lines. The bigger problem is the space has bulkheads and other obstacles that leave me no good options. The best I have at the moment is mounting it along the long wall at 1/3 the distance BUT there will be a large concrete pillar 2 feet in front of the inlet. The outlet points right where I'm at most of the time. I also have a smoke stick and have checked to see if this placement will p…

      • Like
    • 9 replies
    • 4.9k views
  18. Started by Chestnut,

    A call out to those who are well organized. What's a good drawer height (depth?) as in the vertical direction. I"m making some drawers for my shop on my outfeed table they are going to be 28"x 23" so large. I'd like to do one bottom drawer at 28x23x10 and then have 18" of vertical height for the rest. I'm not sure if i should split that 18" into 3 or 4 drawers for a total of 4 to 5. I'd like the very top one to be more shallow for small items like marking gauges ect. I always call this the depth thinking about it like a body of water but the common word is height?

  19. Started by prov163,

    I am replacing the Shop Fox 1hp collector with a 2hp HF equipped with a Wynn canister filter. As you can see my table saw and jointer are in close proximity. I roll my planer over in front of the jointer and use the flex hose that goes to my planer (hanging up in the pic). I have one run that is dedicated to the table saw. I control them with the blast gates you see in the picture. This has been a real pain for years but put off dealing with it until doing this upgrade. I could use some advice: 1. Best placement for blast gates? These are just hanging and a pain to get to. Problem is the HF intake is closer to the base, though it is a dual port so that should be a p…

      • Like
    • 14 replies
    • 7.4k views
  20. Started by Art,

    I'm thinking about building an air filter for the shop using a 20" box fan and some furnace filters. In looking at the filters online, it seems they come in a variety of ratings, but essentially the higher rated ones are more expensive (naturally). Does it make sense to stack the filters to try to improve their lifespan, ie: put a lower rated one and a higher rated one inline, to try to capture the bigger particles first in the cheaper filter? Or am I overthinking this, and should I just buy one of those ones that hang from the ceiling? How much of an ongoing cost is it to replace filters in those?

    • 7 replies
    • 3.1k views
  21. Started by Marmotjr,

    Looking to make a proposal at work to purchase some large air filtration systems to help clean the air. Along with a large amount of solids, a lot of the material we use is veneered ply or mdf, and if somebody uses a ROS or router on it, well, there's quite a cloud. Milling of the rough lumber is done in a separate building, and the CNC and sanding is done in other rooms. Shop is roughly 30,000 sf (300x100), and about 30 feet high. 3 Large support columns would easily support two units each, for a total of six. I can easily find units for large home shops, and anything on the industrial scale is a lot bigger than I'm thinking, as we don't have constant dus…

    • 7 replies
    • 3.4k views
  22. Started by jussi,

    I'm hoping to finally install my cyclone early next year and was wondering what kind of ducting you guys use. I currently have 4" SD for my Delta dc but want to step it up to a 6" metal ducting when I put in the cyclone. It's a 3hp Oneida. Nordfab would be the ideal choice but too expensive for me. What other options do you suggest looking into? Thanks

      • Like
    • 12 replies
    • 4.2k views
  23. Started by Marmotjr,

    Ahhhhhhhh... so nice. Shop is in a 2.5 car attached garage (rental house), but doesn't have heat and the door is poorly sealed. So it's very cold out here. It's also where my computer is as I'm a cigar smoker and I don't want to muck up the house. Suffered through last year shivering, but last week I said F this and broke down and ordered a torpedo heater from amazon. 60k BTU, takes about 30 minutes to warm the air up where I'm not seeing my breath and my hands are usable. About 45 minutes to an hour and I take off my over coat. Seems like I'll get about 3-4 weeks per 20 lb propane tank. Much more comfortable. With the drafts and basement staircase in th…

      • Haha
      • Like
    • 41 replies
    • 8.7k views
  24. I have an old Powermatic contractor table saw (circa 1985) with Vega Fence. I am intrigued by the jig flexibility of the extruded aluminum T-slot. Rather than buying a new Biesemeyer fence, has anyone looked into modifing a Vega with this add-on?

    • 8 replies
    • 7.8k views
  25. Started by Immortan D,

    I need one for occasional metal hardening on small tools I'm planning on making (owls, marking knives). What do you guys have in your shops? I've been looking at pretty cheap butane units and also a much more expensive Dremel one with lots of accessories I'm not sure I need.

      • Thanks
      • Like
    • 24 replies
    • 5.1k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.