Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Shop

  1. Started by Mark J,

    Thought I'd put this under The Shop since it's about shopping. Got a coupon in the mail from Home Depot. It is a one time (multiple items , but one trip through check out) offer for 10% off anything in the store. Max I can buy before the discount is $2000. There are some other restrictions, but leave them aside for the momment. Bearing in mind that it's 10% off, not free, and has to be in store stock, I am trying to think of some woodworking things that I would be likely to buy eventually that I could save money buying now. I've always liked that Rigid oscilating spindle belt sander so that's top of the list. I was also thinking of an air compress…

      • Like
    • 43 replies
    • 8.2k views
  2. So, part of my lighting solution is a set of regular porcelain lamp holders. I like having these as my ceilings are a little low, and they throw light out sideways better than my shop-lights or track-lights. The issue is I end up looking directly at them more than is pleasant. Has anyone found a cheap or easy solution? For awhile I was thinking of china globes, but all the ones I could find were intended for pendants rather than direct ceiling mount. The bulbs are LED, so I'm not worried about a fire hazard.

      • Like
    • 15 replies
    • 3.6k views
  3. Started by andrew-in-austin,

    I am preparing to add some ducting for dust collection, but I am having some trouble deciding between metal and pvc. I would like to do metal, so I do not have to worry about grounding pipes (to avoid static shock). The issue I have is the cost. It's looking like metal will be at least triple the cost. Is this what others have seen, or is there something I am missing? For those who used pvc, did you bother trying to ground the pipes? Thanks,

      • Like
    • 72 replies
    • 28.1k views
  4. Started by Chris H,

    I have recently upgraded my 2HP Harbor Freight unit, that had a Wynn Filter and Super Dust Deputy, with a Grizzly G0562. The original plan was just to plop the new blower on the existing setup and expand/replace the filters (ignorant in hind sight). However, I quickly found that this was much too much motor for the "Super Dust Deputy". First time I fired it up, it sucked the pipes clean as well as emptied the barrel. So the backup plan was to upgrade to the "Super Dust Deputy XL". The motor overpowered that as well. I could get the barrel to about 25% full before the chips just went right to the filter/bags. So my question for the forum is i…

      • Like
    • 17 replies
    • 13.8k views
  5. Started by georgepag,

    Hi, This is a follow-up question to an earlier entry about a Harbor Freight dust collector I am installing. I picked up the dust collector today. I am going to add a Thein baffle and was going to add a new 0.5 micron filter bag but now have another idea I'd like to get some opinions on. I have a diy air handler hanging from my shop ceiling. I say handler, not filter, because it is simply a squirrel cage blower from an old FHA furnace, in an enclosed box, that sucks in shop air and exhausts it outside through a length of corrugated air duct. There are no filters on it. Rather than buying a new filter for the DC it occurred to me that I could just connect …

      • Like
    • 3 replies
    • 3.2k views
  6. Started by Mike T,

    Im going to vent everything outside to some sort of containment container. Looking for a source for a 3-5 hp blower only. Probably best supported by a stand. Any good suggestions? Will DC manufactures sell you just the blower and stand. I'm asking cause I'm absolutely terrible at wading through internet searches and I'm lazy, but more importantly I'm betting that someone here has put together this exact type of system and can help me avoid pitfalls. Thanks Mike T

      • Like
    • 2 replies
    • 2.7k views
  7. Started by rodger.,

    How do you guys store your table saw blades? I have a growing collection, and I am currently keeping them in a drawer in their cardboard sleeves. Anyone have some pics they would like to share of their solution?

      • Like
    • 35 replies
    • 16.7k views
  8. Started by ChrisG-Canada,

    I'm looking for garage door storage ideas. By this I mean storage ON an overhead garage door - not above the door. My shop is a double car garage attached to my house. One whole wall is taken up by 2 8'Hx9'W insulated garage doors. Pic attached... While I appreciate being able to open the doors for airflow, etc. I do miss not having more wall based storage. I often look at the large spaces taken up buy the doors and wonder if there's any way to use some of that space. Obviously the storage option has to work while the door is closed, while it is opening and closing and when it is open. Sounds simple, lol. The only thing I've found online is on the…

      • Like
    • 6 replies
    • 3k views
  9. Started by bleedinblue,

    For those without a cyclone, what kind of separator do you use with your dust collectors? Is a shop made Thien separator as effective as a Super Dust Deputy, or is the SDD efficient enough to justify the cost?

      • Like
    • 36 replies
    • 20.5k views
  10. Started by TerryMcK,

    This weekend in the UK is what is quaintly known as a Bank Holiday. Essentially this is a 3 day weekend with Monday being a public holiday. We have 8 of these a year. What it gives me is an extra days shop time. This weekend I have put aside a couple of hours to sort out the garden (yard) tools. They take up a very small space in the shop and my aim is to get the space occupied even smaller by consolidating them onto a few hooks. Also the brooms will be organized. I DO use the brooms to sweep up all the woodworking waste. Before and after pics to follow. Once that is done I can then get back to some real shop time. Wahoo. So what are you intending t…

  11. Started by MunsonT45,

    I had been using a Bosch 4100 tablesaw for a few years. It did everything I asked it to do. Only problem I would have is ripping large sheets of plywood. Inevitably it would push the fence out of alignment just enough to make it annoying. I felt like I was measuring with a micrometer and cutting with an axe. I decided to upgrade and went with the sawstop 3hp 52" fence. This thing is a beast. It was pretty easy to put together...they made it idiot proof. All the talk of easily laid out instructions is true. One of the things I don't get about the saw is why it is so polarizing. People either love it or hate it. I get that, but I don't understand the complaints about the pr…

      • Like
    • 8 replies
    • 3.5k views
  12. I want to start wood working and make some garden fences, gate, closet shelves, arbors and some garage shelves. I have a small work area and wonder if anyone could help with tools suggestion. I have small storage area in the garage left and the work space may be a one car parking size which I might have to roll off the tools to the corner. I would like to get a table saw (DEWALT DWE7491RS) possibly miter aw (GCM12GDL) with stand? (T4B), a decent joiner, clampssss.

  13. Started by Klappco,

    Made two. One for the parallels made of leftover mahogany. Inspired by Marc's rack. Second one for the others is again inspired by what Marc did but I used a couple of Hemlock 1X4s that I had on hand. Used the dado set to make a center groove, then mounted those on the wall (plywood cabinet side) with screws. Predrilled for two more in each slot, glued in the bar holders, and rand screws through the wall into each holder for extra strength. Used oak dowels for rods as they were the straightest ones at HD. First picture is of the dry fit. I love it when they go together just right! [emoji76]. Both racks finished with ARS. …

      • Like
    • 10 replies
    • 5.4k views
  14. Started by OldSouthWoodCraft,

    Nothing fancy but I was tired of dragging my vac and dust deputy around the shop. Still needs some hooks for accessories and a couple of bungee cords to hold the containers down. Turned out pretty nice for a 2 hr build. Sent from my SM-G930V using Tapatalk

      • Like
    • 12 replies
    • 3.1k views
  15. Started by Eugene,

    Greetings, I work with an importer of Baltic Birch Plywood from Europe. Great quality. BB/BB grade, sizes and thicknesses. Certification.Distribution warehouse is in Lilburn,GA Please inquire if any interest. Thanks, eugene

    • 2 replies
    • 3.1k views
  16. Started by collinb,

    Instead of building a storage solution that looked like a sheet rack I went for the shelf approach. Sorted by size. Except the bottom section -- that's sacrificial pieces and camping firewood. Sent from my MotoE2(4G-LTE) using Tapatalk

  17. Started by Derek_PNW,

    I am preparing to have a licensed electrician come in to install a dedicated 240V/30A breaker for a Clearvue CV1800. I have searched this forum and others to make sure I know exactly what to spec since there are thousands of different situations. Even though he is the expert I just assume he is not typically installing a 5HP motor... Here is what I understand I need to wire up the CV1800 with the purchased CV electrical box. 8/2 awg with a 240V/30A breaker. Do I need to install a GFCI since it is in the garage? Does this mean a 30A GFCI breaker which is extremely expensive? Or is there a different overload protector? Anything else? Also planning to run…

      • Like
    • 17 replies
    • 5.4k views
  18. so over time I have accidentally cut/punctured/poked a hole in the clear bag far to many times, sometimes just by grazing it and not knowing it. So I decided to find a barrel and replace it once and for all. I came across a 15 gallon white barrel, it was big enough coupled with the separator I have inline that it will not fill all that quickly. I figure this barrel will need emptying once for every 6 or 8 times the separator needs emptying. In my small one man shop that translates to probably 5 or 6 times a year....I just made the bottom from 3/4" plywood I had and made a tight fit in the bottom of the dust collector housing, I then offset a hole again tight fit for the b…

    • 2 replies
    • 3k views
  19. Started by Ibboykin,

    I'm new on here. I have inherited a large assortment of tools from my late father and it has given me an excuse to build a shop like I've always wanted. Having had the daunting task of cleaning up my fathers shop as I moved the tools out, I was overwhelmed at the sawdust. His shop was a selling point for dust collection. My new shop will be 24x30. I am dedicating a corner for an air compressor and dust collection. Yesterday I stopped in at a woodworking store and was talking with them on this topic. The next thing I know, they are trying to sell me a $7000 dust collection system. Lets be realistic. This is a one man shop. I will not have more than one…

  20. Started by Numenor,

    We will be ordering a pre fab Reeds Ferry Shed in the next few months which will serve as a workshop (wife wants all explosive-y stuff out of the basement). I will be doing the wiring, insulation trim etc etc to the interior. I am in Massachusetts and the shed will be approx 12x18. Do I need a proper vapor barrier in addition to the vapor retarder included in the paper faced insulation, and will 3 Louvered vents provide enough air movement or should I upgrade to the ridge line and soffit venting? To start I will have a window AC in the summer and a small ceramic heater in the winter. Eventually I want to put in a mini split (unless the AC/space heater perform better than …

      • Like
    • 5 replies
    • 3.7k views
  21. Picked this up new at an estate sale. Got the canister shop vac from a thrift store. They fit together nicely on a small cart. The 2.5" connector isn't a problem when it's on the table saw. It picks up dust with ease. With an adapter to 4", on the jointer it's ok if the cuttings are small. That means edge jointing works but not so well with the larger pieces, like 4"-6". One test I saw online showed the bucket collapsing when using a higher powered​ vacuum. In that light it is probably a good tool to use in the small shop or if you have a dedicated application but once you start jointing or planing larger pieces then it's not enough. Sent from my MotoE2(4G-L…

      • Like
    • 11 replies
    • 3k views
  22. Started by comp56,

    ok ok so a CNC router will do much better than this, however if you don't have one yet and want to do fine detail routing such as images and such I come up with this method to make everything larger and far more easier to see. With the enlarged view, fine detail can be achieved. I am running this as a first time test to see how easy or hard it would be to follow. It is broadcasted to my 32" computer monitor ..let me know what you think......

      • Like
    • 7 replies
    • 3.4k views
  23. Started by comp56,

    picked up about 80 feet (in 4 foot sections) of this heavy duty rail and peg system the pegs can hold almost 60LBS I cut them down to about 1 foot long for this... they are usually are around 22" long along with 20 some pieces of the rail I also got about 180 pegs as well....now I can have all my sanding/grinding discs in one place and easy to get to....

    • 1 reply
    • 3.1k views
  24. Started by gee-dub,

    Just a reminder. I was putting up a new laundry cabinet which brought me into proximity of a fire extinguisher that I pass every time I leave the shop. I am diligent in checking my safety gear but, low and behold; the extinguisher I pass more often than any other was in the red!?! Take a moment the next time you go into the shop, before you even put your coffee down, check your extinguishers. A recharge or replacement is cheap insurance. That is all.

      • Like
    • 12 replies
    • 3k views
  25. Started by atlinwi202,

    We are looking at buying a new to us house and with it a new shop for me. I currently have a 1.5 detached garage that is all my space. The drawback has always been no heat and a single 20 amp circuit. We knew we weren't staying forever so we didn't put in a panel or heat. Location is SE Wisconsin so the lack of heat has always kept me from working in the winter, the best time to be in there. I am thinking for my next shop I wouldn't mind it being in the right basement space. It will make it much easier to find a house and get more space, potentially. There are not really any houses with detached shops where we are looking. We will have a garage, but we keep cars and …

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.