The Shop
1,954 topics in this forum
-
Hi, I plan in building a new workbench and I am looking purchase a wood top with a vice/vices and is set up with bench dog holes. I have looked and all I find is just finished wood slabs. Second does anyone have any use with the Laguna combination sander? https://lagunatools.com/sanders/db126-sander/ thank you
-
-
- 11 replies
- 4.5k views
-
-
A few months ago I posted about my Triton router table motor that stopped working . I checked and found out that the warranty had expired so I purchased a Porter-Cable 3.25 hp motor and installed it in my Kreg router lift. I used it for about one hour and it made a loud sound (sounded like when a car bearing goes bad). and, although it has power, makes a sound like its full of metal pieces. I was profiling a piece of maple running the motor at maximum RPM when it happened. I know that when they run at high RPM they produce a lot of centripetal force. I checked to see that it was properly installed in the lift and it was BUT I noticed that the lift permitted about 3/16" ve…
-
-
- 21 replies
- 4.8k views
-
-
As many of you know, I travel for work. One of the perks of that travel is getting to visit other people and shops around the country. I was recently in New Mexico for work and Mick was gracious enough to invite me to his shop. I shot a video of the tour and thought I'd post it here for you guys. Huge thanks to Mick for the tour and the hospitality! Hopefully one day I can return the favor!
-
-
- 5 replies
- 3.7k views
-
-
-
-
- 19 replies
- 90.3k views
-
-
Just like on many other projects, I realized a better way after building and using my plywood storage bin. Just wait a few months and I'll probably think of better way. In my original bin (1st two pics), I would bring a sheet in the walk door, stand it up, turn 90* and slide it into the bin. To use a sheet, I had to slide it out, turn 90* and slide it over to line up with the saw blade. The new bin is turned 90* so I don't have to do nearly as much plywood maneuvering. I had to move my wood storage to a spot that isn't quite as convenient, but boards are a lot easier to handle than 3/4" plywood. The "before" bin pics look nice and neat. I forgot to take som…
-
-
- 6 replies
- 4.3k views
-
-
I just completed building my new workbench and mounted the new clamps. I was wondering what you recommend to line the jaws of the clamps with. I read somewhere that rawhide works best; is this true or can something less expensive be used..?
-
-
- 14 replies
- 4.9k views
- 1 follower
-
-
One of the things that frustrates me to no end is that I can cut and measure and fit and assemble and for some reason it never works according to plans. Even when I don't do it ad hoc but actually create a written plan. There's something wrong in my frame of mind that keeps things from working as they ought. I tried to treat a project like I would a kit. I design and measure each part will be also noting that 3/4 plywood isn't 3/4. I even measure after cutting just to be certain it's what it should be. But I am missing something somewhere. there's an attention to detail I'm trying to practice but just can't seem to wrap my head around it. this isn't the differen…
-
-
- 11 replies
- 5.8k views
- 1 follower
-
-
hello, I am working on building a workshop, it will have a 5.6*4.6m (17*14ft) inside dimensions... My "problem" is trying trying to place the various items in the shop (which I need to do ahead of time as I want to bury power and dust collection pipes)... Since I am at the design phase, I can do prety much what I want, which is nice! however, I have a hard time thinking how to organize the various items... Hence asking for help here!!!! I need to place the following items (by order of most to least used): Rigid table saw: 160*100cm tool box: 50*70cm planer: 70*100 6" jointer (110*60cm) band saw: 60*50cm lathe: 160*50cm I also h…
-
-
- 15 replies
- 4.2k views
-
-
Looking for some dust collection solutions at the grinder. I have a grinder with CBN wheels and sharpening produces a good bit of particulate steel debris. I was starting to ponder how to do DC, but was thinking maybe this problem has already been solved. My set up has two CBN wheels with the guards removed. I was thinking about a hose clamp to position either the shop vac hose or 4" DC hose near the bottom of the wheel.
-
-
- 25 replies
- 9.9k views
-
-
I have a Harbor Freight dust collector, and they're generally pretty popular for those of us just starting out. So the normal price is like $200, and there is always a 20% off coupon around that'll bring the price down to $160. And there are other tools like sanders, drill press and such that are decent for starting out. Well the new coupons are starting to exclude "Central Machinery"... This is on their front page today... But if you click on it to print, the "Central Machinery" exclusion is gone. Kind of suspect they're trying to move away from the coupon thing... Most of their good stuff is on that exclusion list anyway.
-
- 1 reply
- 4.8k views
-
-
My shop consists of my driveway and about half my garage. All my power equipment is on wheels. I must, perforce, connect to my dust collector with flexible hoses Why is it that the fittings I buy to make my various connections don't fit, even if I buy them from the same vendor? I recently purchased a garbage can lid type separator. It consists of two pieces (the lid and an elbow), presumably from the same manufacturer. The elbow wouldn't stay in the lid! I had to put layers of painter's tape around the fitting to get it to defy the force of gravity inside the garbage can. I've had the same, or similar, problems with other pieces of my equipment in both 4" and 2 1/…
-
-
- 13 replies
- 4.4k views
-
-
Anyone seen or used one of these before? They look a lot like the Portamate one but it's currently on sale for $19. https://www.sears.com/craftsman-mobile-base/p-00916495000P?sellerId=SEARS&prdNo=43&blockNo=43&blockType=G43#
-
- 3 replies
- 3.3k views
-
-
My new wood shop is finally coming together but one thing I need to build is a bench for my Hitachi chop saw/miter saw. I've been looking in the usual places for ideas and plans and there are plenty, but was wondering if any of you are head over heels about any particular build. As always, I appreciate the input!
-
-
- 17 replies
- 5k views
-
-
I produce significant amounts of what I will call wood waste (saw dust, plane shavings, or cutoffs/scrap), and thought it might be worthwhile to start a conversation to see how other people get rid of this stuff. I never want to throw wood waste into a landfill. So I am always looking for good ways to dispose of this stuff. Hand Plane Shavings: I use these in my charcoal chimney whenever we fire up the grill. They are perfect for this use as they are always super easy to light and they always burn long enough to start the coals. And I can stuff a LOT of shavings into one chimney's worth of charcoal. I can usually get about 1 plastic grocery bag'…
-
-
- 23 replies
- 5.4k views
- 1 follower
-
-
I've been spending months trying to clear out room in our basement storage area so I could move my table saw, jointer and planer from the garage down there. I've made a lot of good progress. So I moved the planer fairly easily. It's just a DW735 on a stand. I figure all totaled it weighs maybe 150 lbs. I strapped it to a handtruck and down it went. So then I moved onto the jointer. A Powermatic PM54a. I couldn't easily use a handtruck with it as it's so long/tall/wide... so instead I took the cast iron off the base, and building a wooden crate around it and then basically slid it down the stairs my wife pulling from the top and myself keeping it from…
-
-
- 19 replies
- 6.9k views
-
-
I'm retired, and a hobbyist woodworker. I have an older Jet 10" contractor table saw which I bought used, and which does not have, nor has it ever had if my research has been accurate, a splitter or riving knife. I know there are small splitter tabs which can be, with some effort, imbedded into insert plates, but I would prefer something more robust, like a riving knife. I do not have access to another saw to see how one might be manufactured, nor do I have the wherewithal to replace the saw. Any suggestions? Tim B.
-
-
- 3 replies
- 5.5k views
-
-
Quick, easy project to build a vertical lumber storage rack..
-
-
- 12 replies
- 4.1k views
- 1 follower
-
-
Does anyone have 18" of 6" flex tubing they want to sell. i dont want to pay $40+ dollars to buy a 5 foot run.
-
- 0 replies
- 3.3k views
-
-
-
I set up my 2 car garage for a wood shop and found after a 15 or so years break from woodworking; that I have gotten old, and half blind. I am hanging led 4 bulb fixtures from a 9ft ceiling, and was wondering what is a good height above the table saw, jointer, work bench, ect, to hang these lights? I hung the first one above the table saw and it is only hanging about 6 inches from the ceiling; it is a 7000 lumen fixture, so it's bright enough, but I'm wondering if I hung it too high?
-
-
- 6 replies
- 3.4k views
- 1 follower
-
-
Yes another one of these topics. I just cannot decide if the extra 1k is worth it for the Gorilla Pro. I have a full shop in a 3 car garage that consists of all the major big tools one could expect. Will the 3hp V3000 be sufficient? At what point does the Gorilla Pro become the logical choice? As a hobbiest I will never run more than 1 tool at once, but at the same time i want the best dust collection possible. I’ve been limping a long with a modded Harbor Freight DC and my garage is covered in dust all the time. The benefit of the Gorilla is an optional 5hp motor that the V series no longer has. This is a minimal bump over the 3hp in price so the decision is V3000 v…
-
-
- 17 replies
- 11.6k views
-
-
I have spent 15 years building my shop. I'm proud of it. It is my favorite place to be in the world, and what little I know about woodworking, I have mainly taught to myself in there. But lately I have been pondering a dramatic move and am interested in hearing the thoughts of the community. About 2-3 years ago, I started getting more and more into hand tool use. ANd now, I probably qualify as OBSESSED. I have built out a respectable collection of planes and saws and more and more they are taking the place of machines in my day-to-day woodworking projects. Now, I dont THINK I am going to d o this, but lately I have been flirting with the idea of dr…
-
-
- 20 replies
- 5.7k views
-
-
I have been getting my basement shop(roughly 25' X 20') setup in my house and it is in desperate need of some real dust collection. Currently, I am getting by with a shop vac and a Jet air cleaner but I am adding a Dewalt lunch box planer and hopefully a 6-8" jointer soon. I am hoping to only buy a dust collector once, so I am trying to find something that will keep up as I expand my tools(table saw, router table, miter saw, planer, jointer & bandsaw). I would prefer to at least setup 1 or 2 main trunks that all or most of my machines are permanently hooked up to rather than dragging something around I am mainly limited by my ceiling height(90 inches). Currently,…
-
-
- 34 replies
- 13.7k views
-
-
Has anyone upgraded the harbor freight 2hp dust collector with a canister filter? What brand did you use and do you recommend it?
-
- 7 replies
- 7.9k views
- 1 follower
-
-
The work bench that I used at Marc Adams school last month had a tail vise. I had never used one before and, WOW, I loved it. Now I have a new item for my wish list. The challenge will be that I will have to add width to my work bench or remake one half of the bench top (I have a split top bench.) Got to admit that I don't even now how it goes together - will have to research that. I imagine that there are lots of mechanisms to choose from from different suppliers. Would hate to end up with a cheap one that does not clamp solidly. Any recommendations?
-
- 7 replies
- 4k views
- 1 follower
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·