The Shop
1,954 topics in this forum
-
Hi all - I bought a twin turbo 20” vise back in 2019 with the kickstarter and I’m finally going to make a bench to go with it. I’ve always thought I’d build the split top roubo (I’ve had the guild project for years, just not the time nor space) and I’m just wondering where others have put their TT vise on a split-top. I’m looking for thoughts on either a) replace the tail vise with it, B) replace the leg vise with it, c) put it on the end opposite the tail vise or d) put it on the corner opposite the leg vise. I would consider myself an advanced-novice to intermediate woodworker, using mostly power tools and finessing with hand tools (I guess that’s the hy…
-
-
- 7 replies
- 4.5k views
-
-
Hey guys. Every time I use paste wax in the shop the strong odor takes days to dissipate...is there some trick to getting rid of it quicker? I applied a thin layer to some mdf for a torsion box bench I'm building, and I just have one rag I used to apply. I turned on my overhead air cleaner on high before I started and have left it on for multiple hours since, and left the window open as well. Any tricks/tips? Is it normal to take a couple days for the smell to go away? Also, how soon can I toss the rag in the garbage? I'm always worried about tossing anything oil-based or petrol-based on the trash for risk of starting a fire, so it's just been rinsed and hung out in my…
-
-
- 25 replies
- 20.7k views
-
-
I was originally planning to add onto a building here for a mechanic shop, but have managed to get the existing building cleared out enough to function as the mechanic shop, thanks to a shipping container, and a working front end loader. Anyway, story shortened some, I've decided to make the addition a woodworking shop. Looks like it will be 24x40. Lumber prices are discouraging, but I've found a sawyer not too far away that will saw full sized 2x12x24's, out of the best quality YP logs, for $84 a piece. I'm going to go ahead, and get the rafters, as soon as the ground dries out enough for us to park my trailer at the end of his mill, and take them right as they'r…
-
-
- 15 replies
- 4.5k views
-
-
(It is the right season for quoting that song, right?) 1. my favorite clamps. 2. How I add a fence to the scms. First remove the tall factory fence so my clamps have a place to grab. Then ...Simple clamping plus use of the depth control.
-
- 0 replies
- 4k views
-
-
I had read several old topics on here about aligning the tables on a Powermatic 54A. The manual states one might have to adjust gib screws if and when one or more table might sag. My problems was just the opposite that both outside edges were higher than the points nearest the cutterhead and no amount of adjustment would allow them to lower and be co-planer. After researching all I could find and finding no simple answer, I removed each gib one at a time and flushed the dovetail with WD40 and compressed air. The gibs looked as if they had no wear and only after reversing the gib end-for-end did I get anywhere close to level. I am going to order a new s…
-
- 2 replies
- 4.8k views
-
-
This is an interesting (and long) article I saw posted at AAW and thought I should share with you folks. It discusses whether or not grounding is necessary. https://www.woodcentral.com/articles/shop/articles_221.shtml
-
-
- 5 replies
- 4k views
-
-
I discarded the Shop Vac barrel in favor of a filter box years ago. It has worked very well for me. I had two vac 'stations' in the old shop and will have the same in the new layout. I am between shops and in temporary digs that allow minimal work to be done. Out of boredom I went ahead and built version-3. It sets low in order to accommodate a large hose reel above it. I haven't got bored enough to put that together yet but, getting something, anything, done felt good so who knows? The plan included a gap between the filter box and the wall to store vac wands. The filter access panel has PVC caps attached to hold my most often used accessories…
-
-
- 9 replies
- 5k views
-
-
I wonder if Porter Cable, a company with many good products, understood when their OEM supplier said that the bandsaw collected dust.
-
-
- 4 replies
- 4.2k views
-
-
Since I'm new to this site, I'm not sure if the topic of "Work Benches" have been covered, but figured I would share mine I have always had a good size work bench that was 4' x 8' and made it to serve as an outfeed table for my tablesaw. As I did cabinets, it became harder and harder as I got older, to lift big, heavy cabinets off the bench. I basically had to slide the cabinet over till it wanted to tip off and then set one end on the floor and tilt the cabinet up. It was just a pain to do. My dream was to have one of those Barth lift tables, but WOW are they expensive!! SO..one day I was looking around Facebook marketplace and found this motorcycle lift ta…
-
-
- 7 replies
- 5.6k views
-
-
It's reasonably light, doesn't take up much space in storage, and the platforms are really comfortable to stand on, while it's really stable. I may get the shorter versions as well. My feet get really tired standing on regular step ladders. It came from Home Depot. They aren't on sale, but I liked it enough to go ahead and get it. This would be a good homeowner ladder for changing light bulbs. The top platform is about 45" high. They yellow ladder it's standing beside is a regular 5' fiberglass one. That yellow tray comes off, and attaches to the back of the top. I just haven't cut the Zip ties that are holding it on, like it came from the store.
-
-
- 5 replies
- 5k views
-
-
I will be designing my dust collection system over the next couple of months and would really appreciate some guidance from those who have been there and done it! I snapped some pictures of where things are now. I'm not committed to any of these locations and things like the jointer and belt/disc sander can be moved elsewhere. Also, that sink in the corner isn't plumbed yet, so it can move. I do envision that the wall in the photo will have all my dust collection tools. In the picture you'll see I have a portable bosch dust collector. I would like that devoted to my fabrication table as I do some routing, sanding, and jig saw work. I'm currently building th…
-
-
- 52 replies
- 25.4k views
-
-
Last week I finished my router table. Thanks to everyone who chimed in re: fixing the sloppy fit of my JessEm router lift in my General International/Excalibur cast iron table. Long story short, I took up the slop with some metal shim stock, but discovered my router plate is far from flat. It's useable in the near term for less sensitive operations but I will need to source a new plate to do anything with precision. I will likely buy a Woodtek plate and drill it for a Triton 3 1/4 hp router once I have enough pennies saved. This is the closest thing to actual furniture I have built in over almost two years and it felt good to get it done. The cast iron top used to be affi…
-
-
- 2 replies
- 4.2k views
-
-
Recently a local gentleman gave away a workbench. That included the vise. The workbench underneath was not suitable for my shop so I dispose of it. I have attached the cise to my table and set the top on it. But my question is what is an appropriate method for attaching the top to my current workbench. I thinking just some screws from the bar inside would be enough.
-
-
- 7 replies
- 4.1k views
-
-
Finally moved to my new house and setting up my shop. The garage walls are bare so no storage for any of my tools. I get the 3rd bay of the 3 car garage for my shop. So first thing i built was a outfeed/assembly table for my new sawstop. Almost done with the table, just need to add shelves for the assortment bins and another shelf for the open part. The table is the same on both sides. I've already made the custom drawer fronts, all they need is a clear coat of epoxy and i need to cut out the spaces for my 3d printed handles to go in. I made 2 drawers, my 5yr old made 1, and my wife made the 4th. Top needs 1 more coat of paint and will paint entire bench grey excluding th…
-
-
- 8 replies
- 5.6k views
-
-
hey guys getting close to finishing up the remodel on my new garage. Just need to do trim and French door. Moving things around (with place holders) trying to figure out the layout before I build more benches/shelving/outfeed table ect. I plan on buying a bigger bandsaw, probably an edge sander and maybe a larger table saw. One part will be for my dirtbike/wrenching area (I film some youtube content in this area). I'm not super concerned with the dust carry over as I dont have my engines open very often.. For welding setup I was thinking of building some kind of outdoor cabinet in the carport that can be locked up that way flammables and fumes can be out there…
-
-
- 17 replies
- 7.6k views
-
-
This is an update on our shops progress over the last few months. The floor joists in our shop had rotted due to water getting in under the shop so we had to replace them. Everything got rearranged after the new floor and a few things added. I bought a PM 66 from an Amish shop for $300 dollars. It had a hydraulic motor on it so he gave me a never used Saw Stop motor to put on it. Now I have a Grizzly and PM both powered by Saw Stop motors. The PM is our main saw now. The Grizzly (former main saw) has a 3/4" dado blade in it most of the time and we run plywood and frame stock through it. We moved the old dado saw (Craftsman) off by itself and keep a 1/2" blade in…
-
-
- 27 replies
- 14.1k views
-
-
The other day someone (can't remember who or what forum) posted about making vacuum hose adapters for sanders, which gave me some inspiration. My Bosch sander has a filter & pretty good collection on its own, but I wanted to be able to connect the shop vac to it. So I had a 3/4" PVC coupling laying around the I did a little cutting, filing & sanding to make an adapter: The coupling is a nice snug fit inside the vacuum hose & the 2 cuts allow it a secure friction fit onto the sander. It is not an airtight fit by design because I didn't want too strong a vacuum at the sander. he Makita belt sander was a little more difficult because …
-
-
- 8 replies
- 6.5k views
-
-
Hi folks - my woodworking time is nearly non-existent these days since the birth of our identical twin boys in June. They are doing great, and no, we're not getting any sleep yet. I thought I'd scratch the itch a little by writing up a shop tour post. If you've been on the forum a while you may have seen some of the work I've put in to get where I am with my current shop today: I went from this: My detached garage, prior to stuffing it full of all the stuff that didn't get unpacked in the house, along with all of my stationary tools. Through this: It was no fun working around all of this, but I got it done! To this: Insulat…
-
-
- 14 replies
- 76.4k views
- 1 follower
-
-
I am interested in what brands of remote switches you all use for your dust collectors. I have had a Long Ranger for a number of years that just died and I need to replace. I was happy with it but wanted to hear from you guys.
-
-
- 14 replies
- 8.8k views
-
-
hey guys, power outage time of year (turn it off to prevent fires) Trying to get my new house setup with a generator, was planning on getting a harbor freight predator 9000w one. I need to instal a transfer switch but was thinking it would be ideal to have the generator over by the detached garage for noise. Right now the power line goes into the garage with its own panel then another line goes off to the house. Will I loose a lot of power from that 100 or so feet of power line (not extension chord) from the garage to the house? I'd like to run fridge/lights/computer charger. Ideally I could run the duct air conditioning but not sure its enough?
-
-
- 2 replies
- 5.3k views
-
-
I just bought a 6 year old, 6 ton single phase gas pack, for $500, that works fine, and has never needed any repair. An HVAC guy that I have done some favors for, called me, and asked if I could unload it off his trailer with a loader. I asked him if he had plans for it. He said no. I asked him what he wanted for it, and when he told me, I told him we could unload it right here. It's going in the mechanic/metal shop building that has only had a wood heater. I bought a heat pump, a while back with a similar deal, that I had planned to use, but found a better use for that. I didn't really want to run electric heat strips to keep the shop warm.
-
-
- 2 replies
- 5.6k views
-
-
I used to buy the disposable 3M N95 masks for woodworking. I've been subsisting on a three-pack I bought last year. But my last mask is just about spent, and obviously these days N95s are difficult to find and are best reserved for use by health care workers. That all being the case, I don't know what to replace it with. What do you folk use these days? Thanks!
-
- 5 replies
- 5.9k views
-
-
Anyone have any first hand experience (or second or third) with this pre-separator for the CT 26? I'd like to know if it works as advertised. https://www.festoolusa.com/products/dust-extraction/pre-separator/204083---ct-va-20#Overview Cleaning up wood shavings after turning can fill a bag pretty quickly. I know Oneida made a cyclone for the Festools, but I'd probably go with the Festool. Another alternative would be to get a cyclone for my shop vac.
-
-
- 3 replies
- 5.6k views
-
-
Hello, I was wondering if anyone has any experience with the Rikon 1HP Wall Mount Dust Collector I see listed on Woodcraft's website. I am looking to add dust collection to my shop which is my detached one car garage, so a wall mounted one would be ideal for space, and also since I am mainly hand tools but use the Dewalt planer and will be buying a jointer in the future. Basically having a dust collector that can handle one tool at a time would be fine with me. If I didn't go with this dust collector I was considering the Dust Right 1250 CFM model with the 1 micron canister. I wanted to go with the higher CFM instead of the 650 CFM model because the Powermati…
-
- 3 replies
- 6k views
-
-
Preparing to move into a new 3 car garage, and my amazing wife is going to let me use all of it to serve as my woodshop. As such, I’m thinking of covering the existing concrete flooring with something a bit more hardy and aesthetically pleasing. I’ve thought about an epoxy or polyaspartic floor covering, but also looking at vinyl tiling. I want something durable but that will allow the space to be resold (if necessary) as a garage someday, so hardwood flooring is out of the question. Was wondering if any of you have finished your garage floors for use as your shop and what you have liked/disliked about what you chose.
-
-
- 11 replies
- 7.1k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,009 Total Members
- 3,644 Most Online
-
Joseph b Newest Member ·