The Shop
1,954 topics in this forum
-
i am looking to buy a older woodworking vise and could use some tips on what to look for and what the price range would be.
-
- 0 replies
- 4.2k views
-
-
Hello, First let me just say thanks in advance for any advice given. I also want to say I am NOT your master woodworker so please keep your criticism to a minimum. I have never had anyone to show me how to do these things and have had to learn this stuff on my own so I am doing this by trial and error. I have made mistakes and spent money that I wish I hadn't spent but I learned along the way so I guess it was worth it. I have been trying to setup a workshop to do small projects in for some time now. I have a few tools and I am to the point where I feel like I am about out of space and I have everything I think I need (I know that's never possible). This is what I ha…
-
-
- 110 replies
- 50.2k views
-
-
Mixing 5 gallon cans of paint by hand was getting really old. I couldn't find a used paint shaker, and new ones are several thousand dollars, so I bought a $300 cement mixer at Menards. Not as fast as the real thing but it works. ( Might be a bit loud. This is the first videos I've ever done)
-
-
- 12 replies
- 6.5k views
-
-
This thickness sander was built very inexpensive and had a lot of fun doing it. I looked at the price of buying one and cringed so decide to try to build one. This was very time consuming making all the individual circles, then building a jig to allow us to level them to a perfect circle once mounted on the spindle. I once again built two of them this being the second one. The first did not go well as I would have liked so the need to try again. The first one was striped of parts for the second one. This unit worked very well and served us with exceptional accuracy. The second last picture is a friend that seemed to like our house and the nine cats we had. He would…
-
-
- 14 replies
- 8k views
-
-
-
-
- 3 replies
- 4.8k views
-
-
I recently upgraded the dust collection in my shop by adding filtration to the exhaust air stream so that I could bring my conditioned air back into the shop. Although this is nothing new, i have several things that no one has seen before that I introduce in this video [link removed in accordance with forum rules]
-
-
- 5 replies
- 5.1k views
-
-
I have a Delta RC-33 planer, that needs repair, can’t find anyone to work on it for me. The head does not go down parallel and thus planes uneven. Bread are really hard to turn as well. I suppose the gears are gummed up. I don’t have the skill need to disassemble it. So I’ll guess I’ll buy new! Mine is a 13” 220V, so it’s plenty powerful. Any recommendations? Don’t want a cheap piece of junk either. larryjhill704@gmail.com Pittsburg KS
-
-
- 13 replies
- 8.7k views
-
-
Until about a week ago my table saw had been disassembled and the pieces wrapped in cardboard for two and one half years. When I moved to Colorado my new digs didn't have 220v power in the garage so it stayed "in storage" for longer than I had foreseen. Of course I didn't know how the cast iron was doing that entire time so I was pleasantly surprised when I opened the cast iron "wings" to find that they were as spotless as the day I packed them up. I coated the cast iron with a product called LPS3 Rust Inhibitor. It sprayed on easily, left a waxy coating that was quite thick, was easily removed with denatured alcohol, and it completely protected the c…
-
-
- 9 replies
- 5.9k views
-
-
Does anyone know anything about the old Rockwell Unisaw, 34-761? I guess Pentair owned Rockwell during the 80s but operated under Delta International at some point. Does anyone know the years they manufactured this machine? I would love to buy an older saw but I'm not sure what I should be looking for. Which are the most sought after makes/models? I'm just shopping here...this one happens to be 3HP, 3 Phase, and the sellers are asking $300. They claim it runs well.
-
-
- 9 replies
- 22.1k views
-
-
https://www.grizzly.com/products/Grizzly-Grizzly-Growler-Cyclone-Separator/G0863 geting back in the shop after a year. starting with some updates so im thinking of buying this cyclone separator to hook onto my 3hp two bag dust collector. but before I spend the money thought that I would see if anyone has this or knows how well it works. also want to build some flip top stands to save some space geting crowded.
-
-
- 23 replies
- 12.9k views
-
-
was thinking of building a couple of flip top tool stands to save space in the shop. if anyone has one can you tell me if it was worth building, how difficult was it? anything you would do differently?
-
-
- 18 replies
- 9.9k views
-
-
This is my small garage shop. It is about 11" X 22" (1/2 of a 2 car garage). As you can see space is it at a premium. All of my benches and tools are mobile allowing me to move things around as needed. My 2 benches are from Harbor Freight that I have modified to fit my use. They all happen to be the same height as my table saw so they double as as an out feed table. The table saw has a shop vac under the wing that is on a auto switch. I also have a mobile shop vac cart with a cyclone I use with the router, band saw. My next project is an air filter cart that my spindle sander and drill press (next upgrade). It will house a 3 speed furnace blower and also give me more sto…
-
-
- 6 replies
- 5.1k views
-
-
One of my old fluorescent light fixtures bit the big one so I went and bought a new LED fixture to replace it. The light was amazing from the new fixture but completely desensed my FM radio. Won't receive a thing. Is this normal or possibly just a bad fixture?
-
-
- 23 replies
- 19.1k views
-
-
I'm installing a prefilter with 2 cheap filters for my mini split system. Any thoughts from others who have done this
-
- 3 replies
- 4.3k views
-
-
My tablesaw is up against the overhead door in my garage. Since I live in the San Diego area, I can open the door most days and use the outdoors for my outfeed area. But the overhead door makes mounting a light over the saw for nighttime use impossible. I was always working in my shadow. I puzzled over this for awhile, and then my youngest son gave me one of the hooded LED lights from Rockler and the light came on (sorry, couldn't resist!) I used 3/4" EMT to make an arm that went up over my saw from the wall. I mounted a light socket on the end of the arm, then added a switch and cord to it. Viola! It works pretty well with the rest of the lights in my shop.
-
-
- 12 replies
- 4.6k views
-
-
It occurred to me I have never posted my shop so here is where I try not to go crazy. This is my carving/inlay/bench. its short ony two feet by 4 feet used only for smaller work. my view from my bench everything is garage sale/craigslist buys bought router table from a retiring woodworking, all the rest were bought from people moving. This is sharpening bench a must for any turner. my stone are in a cupcake carrier I bought from doller store best investment for storage and water well I ever found. eventuly it is were I will store my metal working equipment like a mini forge to take out to driveway and a welder. soder ect…. …
-
-
- 23 replies
- 6.1k views
- 1 follower
-
-
I'm located in Maine and recently picked up a Delta Invicta planer 22650. I'm looking for a second one because in need a new belt and pulley guard (part #428-06-089-0001) . The bottom of the one I have is broken and missing. Is there anyone on here from Maine that has one? Is there any one on here that has a parts machine that is willing to part one?
-
- 3 replies
- 3.9k views
-
-
My wife, dog, cat, tools, and I moved to Ohio from Washington State in November. Our house was built in the 20s, with an addition sometime in the last thirty years. The detached two car garage appears to have been built at the same time as the house. My beautiful, intelligent, and incredibly thoughtful wife has given the thumbs-up to my building a shop addition to the garage (so long as I also build an enclosed breezeway between garage and house). Sounds pretty straight forward, right? Well, there are a few complicating factors I need to sort through, and hoped the fine WoodTalkers would weigh in with thoughts. If you read what follows and think I ought to proceed in a di…
-
-
- 65 replies
- 20.6k views
-
-
The title says it. I'm between shops and want to start with some sort of indicator early on this time. At 1200 sq ft I understand the DC1100 would need to be carried around to the areas I want to monitor. That doesn't concern me as much as whether folks have been happy with the unit. So, what say ye long-time users?
-
- 1 reply
- 3.3k views
-
-
-
Hi all: just found this site hope someone can help. I plane a lot of wood and want to avoid another vacuum system. Any ideas on collecting the chips??? Thank Much Enjoy the Wood Tim
-
-
- 6 replies
- 3.9k views
-
-
Have a look at her fantastic space here: https://youtu.be/4CFN0YQRW10 I wish I had that much space. One side would be the shop the other side would be an observatory with a motorized slide off roof.
-
-
- 11 replies
- 4.9k views
- 1 follower
-
-
so I have getting by without some dedicated jigs for the shop. I decided to build some sleds and guides for the shop starting with my table saw. im going to use fishers videos as my bases for the jigs im going to build. Does anyone have any recommendations for other jigs I should build? not just for table saw but for router table, bandsaw ect...or some better jigs then the ones in the videos?
-
-
- 38 replies
- 9.5k views
-
-
I saw another post about sheet good storage and I didn’t want to hijack that thread so I started a new one. l am starting to get way to clutter with my “sorted out organized” piles of wood. I need to make a cart to put this is and I would like to have it on casters. Rather than list what I want to put in my cart I think I would like to see photos of what others have. I know after I see those I will change my mind on what I want anyway so it will be a waste of time to make a list of what I want. If I decide to go with your cart would you be willing to send me some simple measurements of it so I can make one myself? I also want to be able to get it through a 36” …
-
-
- 5 replies
- 3.5k views
-
-
I have a 1hp dust collector mounted on the wall behind my lathe and miter saw and was thinking that I would like to put a filter and separator before the motor so that I can separate out my chips and dust from the motor. the chips from the lathe end up geting tossed into in the impeller and since its just a cheap harbor freight machine I figure the impeller is plastic or light weight metal. thought if I can separate out the chips before they hit the impeller all the better. I thought about geting a dust deputy and adding into the line but none they have for shop vac will work with the 1hp dust collector and I don't want to spend the hundreds of dollars for a tool that…
-
-
- 9 replies
- 4.3k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·