The Shop
1,954 topics in this forum
-
So I decided to build a new router table with the capability to handle Beaded Inset face frames. Yea...Kreg has one you can purchase, but I wanted something larger, and more robust. So far I have the fences done, and the pneumatics worked out. Now I'm going to make a sample top to lay everything out make sure it all works as expected. I built a "traditional" adjustable fence, and a separate one for the beaded inset function. I used 80/20 aluminum channels and hardware, nice stuff! The beaded inset fence will have linear bearings and rods to precisely control the movement of the fence across the cutter. It will be controlled with a pneumatic actuator. The forward mot…
-
-
- 14 replies
- 3.3k views
-
-
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=video&cd=&ved=2ahUKEwiBhb2t56n7AhWnlIkEHVpPABcQtwJ6BAgHEAI&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DE0so5A_qDAo&usg=AOvVaw1_I2qqz55vZLhn6Q62QJ6M I may have to include some kind of dust collection…
-
-
- 5 replies
- 3k views
-
-
Things you built for the shop. Not tools you've bought unless your built something to upgrade them. No Youtube links please.. Drill press tables, panel sleds, etc...
-
-
- 21 replies
- 3.9k views
-
-
-
I have run without the lower cabinet bottom collection point on my larger bandsaw for years. I do this by collecting right under the table and then again just below the guides inside the lower cabinet. I have recently expanded a lot of my 4" collection points to 6" and the increase in collection is very noticeable. This led me to test replacing the 2-1/2" under-the-table collection point with a 4". The improvement was again very noticeable so here I go. Like the 2-1/2" version the shroud is thin ply with magnets to secure it. This saw will be connected to the new drop I posted a thread on here. A 6x4x4 splits the path close to the source. I fig…
-
- 1 reply
- 3.2k views
-
-
Let me just say from the start that this is definitely a first world problem. My wife and I plan to downsize our house. It's complicated, and it's something we've been working through for a while, but at this point it looks like it will be nearby rather than out of state. And our focus has evolved to favor new construction over an existing home. A change of homes is a change of shops, which, it turns out promises to be quite disruptive. However, it still cracks open the door to the dream shop conversation. (Although, I have to constantly remind myself that a daydream does not always easily convert into a PAID dream). My present workshop is in the basem…
-
-
- 38 replies
- 7.3k views
- 1 follower
-
-
https://www.oneida-air.com/dust-deputy/wet-dry-vacuum-kits/anti-static-dust-deputy-2-5-inch-plus-cyclone-separator
-
- 0 replies
- 3.1k views
-
-
-
More and bigger boards than I have space to dry flat. Nothing novel for anyone in a garage. Just wanted to show people what I can accomplish without twine.
-
-
- 6 replies
- 3.2k views
-
-
Shop organization; the endless enigma. My saw horses end up left open which takes up space for no reason -or- leaned up in the corner along with my torsion beams, leaned against a machine, moved six times while I am doing something, etc. This morning I take my revenge! I have some literally garbage ply scraps . . . they'll do. I cut out some oversized blanks and laminate them to make thicker material. From these laminated blanks I cut out the shapes that will fit the things I need to rack. Once again taking good pics of the interiors of the walls before putting up insulation and wall board pays dividends as a reference. I always fee…
-
-
- 17 replies
- 4k views
-
-
A big step up from the old Craftsman. Built a bed right away. Also found another good use for the rare earth magnets.
-
-
- 6 replies
- 3.5k views
-
-
Corollary to the ceiling height question. For those in basement workshops, how wide is the door to your shop that you have to use to get equipment in and out? We're looking at other houses and I'm finding doorways can be as little as 29" (30 if you take the door off).
-
-
- 8 replies
- 3.4k views
-
-
For those in basement workshops, I'm curious how much ceiling height you have to work with? Exclusive of ducts and I-beams, etc., but looking at floor to joist height (or floor to drop ceiling, if that's what you have). My current shop has 8 feet, but we've been looking at other houses lately and many have 7 or 7 1/2. Wondering what other people's experiences are?
-
-
- 10 replies
- 3.2k views
-
-
I'm setting up some pneumatic lines and I've come across a thread size I haven't seen before in quick disconnect fittings; and because I haven't gotten a grasp yet of how odd pipe sizes work I thought I should ask before I started ordering random parts, which is my usual MO. I need a fitting that fits the thread in the first picture and plugs into my regular quick connect air hoses. The part (for comparison) underlined in red is labeled a 1/4" male connector by the kit it came in, and although it looks like it'd fit the hole it doesn't. So, does that make the one that does something like a 1/8"? I'm not even sure if quick connect fittings come with that size threa…
-
- 4 replies
- 3.1k views
-
-
The next shop project for me, personally, is going to be a new workbench. I have a couple plans for the bench, but would like to ask you guys for your opinion about how I should build the top. My current benchtop is 3' X 6'. That has worked well for almost...or maybe 10 years. The cabinet under it is not stout enough for my upgraded usage...so I'll just build a new one. I think I'd like to stay the same size, or maybe 5' X 30". We'll see. How thick would you guys suggest? How many laminations of what material? What different materials should be finished with what finish? How much overhang past the cabinet for clamping, etc.? I have seen gee-dubs p…
-
-
- 8 replies
- 4.6k views
-
-
I just saw one in use on another forums. I guess they've gotten cheaper since I last looked at big ball valves. https://www.amazon.com/Midline-Valve-T-Handle-Connections-482T400/dp/B08CX6P23Q/ref=asc_df_B08CX6P23Q/?tag=hyprod-20&linkCode=df0&hvadid=532543771405&hvpos=&hvnetw=g&hvrand=644995830375085582&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9009793&hvtargid=pla-1440690184254&th=1
-
-
- 4 replies
- 3.1k views
-
-
My shop build included features to ease expansion and changes. I know we have a few people on here doing or re-doing shops. I cannot urge you enough to spend the little extra money and effort now to ease your actions later. Here I am at "later". I planned and built this drop for another bandsaw, a second router table, or a crosscut tablesaw. As it turns out the bandsaw wins. The drop as shown was already in place. I simply removed the plug and added the first 45 degree elbow for this short, although busy run. A shout out to the rolling work surfaces. After the 45 comes a 6x6x4 wye. The 4" port will be gated to a length of hose. This hose will serve temporar…
-
-
- 4 replies
- 3.3k views
-
-
Creating a thread for discussion of my findings from the dust detector i bought a while back. After seeing some experiments from Mattias Wandel, I have a bit more confidence with the detector. The model he is using is similar if not the same the only difference is he has his modified to collect the data with a raspberry pi computer. I've posted about this in other threads but i can't remember where and it's probably a hijack of the original thread. As other forum users have the meter I figured a thread to discuss findings could be helpful to help people determine what would help improve shop air quality. I ran the meter a bit in the kitchen as I've read multiple…
-
-
- 6 replies
- 3.4k views
- 2 followers
-
-
Those of you who have computers in your shop space, how do you protect it from dust?
-
-
- 20 replies
- 10.2k views
-
-
I installed an Oneida DC and duct a few years ago. Definitely a huge improvement, but not something I could quantify. I found a particle counter on Banggood that was less than $50 and is highly recommended by a few people who have the knowledge to properly evaluate them. So now I've been turning it on whenever I'm in the shop. It's battery operated, so I can easily put it where ever I'm working, but it usually sits on a head height shelf about 4' behind the table saw. The shop air, when it's been vacant, is very clean, much more so than in the house or outside. .3 micron particle count is around 120 - 250 per cu. meter. Once I start the DC that count drops down to in…
-
-
- 25 replies
- 6.8k views
- 1 follower
-
-
18 years ago, I designed my shop using a (free, I think) software tool that only worked in two dimensions. I need to design another shop and cannot find a two-dimension design tool. I don't like the complex three-dimension tools such as Sketchup. Does anybody know about such a tool? Here is an example of the drawing I did in 2004. shop 2.pdf
-
-
- 17 replies
- 4.2k views
-
-
It’s been tossed around more than it should but I’m hell bent on a new one. To make it short and sweet, those with a fix piped system, tell me the name of your dust collection system, the pros and cons, and what you would do differently, if applicable . I am limited to an 8’ ceiling. Thanks.
-
-
- 49 replies
- 10.1k views
-
-
Picked up one of these. Seems well-constructed and should outlast the cheaper unit I used before. Cut a 14awg cord and inserted this in-line. A simple install. Strain relief is necessary for both reliability and safety. https://www.amazon.com/dp/B07WV72DFR?ref=ppx_pop_mob_ap_share
-
-
- 13 replies
- 4.4k views
-
-
About 6 months ago after being frustrated at not being consistent and very fast at sharpening my lathe tools I bought the Wolverine jig, and a slow speed grinder. Well I had a grinder and, a Worksharp machine that just seem to bounce around the shop and I decided to give them a home that I could roll around so I built a station on cabinet with 4 drawers and mounted all 3 grinding machines to the top Then fast forward 6 months, I got tired of the hair ball of power cords always in the way and decided to make a 2 gang recepticle inside the cabinet to plug the grinders into so no cords were cluttering the top of the rolling cabinet so I drilled some holes through…
-
-
- 4 replies
- 4.3k views
-
-
It doesn't rain often around here but when it does odd things sprout up.
-
-
- 402 replies
- 79.5k views
- 2 followers
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,009 Total Members
- 3,644 Most Online
-
Joseph b Newest Member ·