The Shop
Plan a woodworking shop that fits your space. Discuss workbenches, shop layout, dust collection, lighting, and lumber and tool storage.
1,954 topics in this forum
-
I have had to accept that I need to empty one of the storage areas sooner than I need to spray finish so some lumber is going in that space . I have made several versions of this sort of rack. This one should only be in use for about a year so it is cobbled from items found. A piece of unused siding that has laid out in the rain a few times will make the tilted deck. Yes it is cupped from exposure to the elements. I clamped it to the bench to determine the height of the supports once it gets squashed flat by all the lumber. The kickers at the rear keep the boards . . . well . . . kicked out from the wall at the bottom. The wall rail is made fr…
-
-
- 8 replies
- 6.7k views
-
-
This has been in the plans since before I leveled the dirt for the shop. Finally getting to it. I had planned to make it out of nicer stuff but, I need it done and had some usable ply available. Enough excuses . . . we're off. This is the general idea although the SketchUp file has been tweaked for so long that reality will probably vary a bit. It swings on a single vertical dowel so as to stand parallel to the wall or perpendicular to it and anywhere in between to allow loading and unloading of material. The base is a bit of a torsion box since this and the spine will take the brunt of the work when the fixture is being pivoted. Here's …
-
-
- 29 replies
- 9.3k views
-
-
Hey guys, been awhile since I’ve been on these forums. Long story short, my life has been pretty crazy/complicated over the past 18 months and I haven’t touched a tool (besides a screwdriver for minor home repairs) or a piece of wood in that period of time. In the past month, I’ve gotten out of the Army, moved to Utah, and started a new job. Next week I move into a new home with the hope that I may never move again. As I expect to be here for a long time, I’m planning to build a shop and was hoping to get some tips/wisdom from you guys. Here’s what I’m thinking. The shop will be 1200 sq ft (30x40), wood framed, and well-insulated for A/C (it gets crazy hot here in th…
-
-
- 33 replies
- 7.9k views
-
-
Recently my father and I have decided we need to make some changes to the shop. With acquisition of some new tools and a significant increase in the use of the dust collector….it’s time to update some infrastructure. First and foremost………..decluttering horizontal surfaces beginning with a drill charging station. More posts to come as we try to make this single stall garage functional again.
-
-
- 2 replies
- 3.3k views
-
-
My shop is directly under our family room in a townhouse. I realize there's no easy silver bullet to completely isolate the shop noise, just looking to quiet it up some of the noise so I can mill lumber whenever I want. The rooms share the same air vent lines with the shop having the vents in the ceiling and the family room in the floor. You can pop a cover off and see where the vent in the other room is. Has anyone made a sound maze for a vent and does it work?
-
-
- 6 replies
- 3.5k views
-
-
I just bought the laguna p|flux 3 and i will be running all my pipe on Monday, but it came with a 8" by 4" 3 port connector and I was wondering if i could remove it and just route an 8" down to 6" reducer and connect with that or do I have to connect to one of the 4" ports? i feel like i read somewhere that you can use 2 of the 4" ports and then leave one open. But i am VERY new to all of this and I dont want to break my dust collector by hooking up a single 8" connection if it is not meant to handle that, please help. and thank you!!
-
-
- 12 replies
- 7.4k views
-
-
I am setting up my new shop. The building is 30x40x12'. Solid 2x6 studded walls. Problem is that it has a drain smack dab in the center of the floor. Very little slope to the first 4-6' in from the walls, but then has an increasing slope down to the drain. I am trying picture how to wedge the downward side of either a table or tool to get it level, while still maintaining the ability to move things as need arises. Suggestions?
-
-
- 15 replies
- 3.7k views
-
-
I'm in the process of converting my full size router table into a benchtop one. Still in the planning stage though, so suggestions are more than welcome. The reason for the conversion is that the big table never gets used. It requires a lot of assembly steps before being able to use it, including but not limited to retrieving the table from storage, setting up the Incra fence, etc. Here's an old video of my table: It remains pretty much unchanged, I only added a t-track in front of the router plate. The plan is to remove material from all four sides, reducing its size by a considerable amount, get rid of the Incra Positioner, install t-tracks…
-
-
- 26 replies
- 7.2k views
- 1 follower
-
-
So i have done 2 shop layouts in 2 different garages and i hate the way i layout things. I'm constantly tripping over stuff and give myself very little room to work around. I would like to make this hobby into my job. I'm extremely unorganized so that doesn't help. I watched a couple videos on youtube about tips for shop layout and i did the graph paper method to try to help me move my shop around. I don't know what it is, but i start a project and never finish it. I'm not sure if i dont know how to finish it but i kinda build as i go. I think this is partly the problem. If i follow thorough plans i can finish a project. But for now i need to focus on making my shop …
-
-
- 11 replies
- 3.7k views
-
-
Hi All, I just joined up and am looking forward to using the forum. Specifically I'd like to PM another member with a question but it's saying I am allowed 0 messages per day. When will I be able to do this? Thanks.
-
-
- 11 replies
- 3.1k views
-
-
I have something like this in a commercial cabinet of my own. A friend who helped . . . a lot . . . with the new shop commented on them. I told him to send me the measurements of his cabinet and I would build him some. Normally I worry about customers sending in drawings but, this guys stuff looks like this : I took what I learned from my first version and applied it to this version. I guess he gets the benefit . I will make him two more after we test fit this one.
-
-
- 2 replies
- 3.3k views
-
-
I have a Jet TS Pro with original blade(40T carbide) which is about 4 years old. I don't do many projects, but was cutting a 2 x 4 to 1 x4. I found I had to feed very, very slow otherwise could stall the TS. I'm looking for suggestions for a better blade thinking it's not the best or dull. I usually visit (lowes/homedepot) since there're close. HD mainly sells DIABLO and dewalt for lowes. Educate my and thanks
-
-
- 13 replies
- 3.5k views
-
-
Starting this thread to get everyone’s thoughts on Marc’s new workbench. I’ve been planning a Roubo build for quite awhile now, likely to start next summer after my workshop is built. I like the heft of the Roubo and the classic look of it as well as the high-quality vices from Benchcrafted, however, I also like that Marc designed his new bench to be more functional for a hybrid woodworker. I’m curious what everyone else thinks about it.
-
-
- 21 replies
- 5.6k views
-
-
New house new basement shop. Thought I'd give a tour but combine it with a "Hey i bought a new thing" and "This is my current project" Here is the sketchup overview of my plan. I've already changed a lot from this point but it was a huge help in getting me started. Stairs into the shop are by the shelf. My miter station is where the shelf is. Miter station and random storage. Yes the blade guard is off, please look the other direction. View from the miter saw towards the big tools. I have a tossed together pine work bench that some day will become an assembly table when i get around to building my penultimate bench because i'm sure i'll still fi…
-
-
- 206 replies
- 45.9k views
- 1 follower
-
-
Hi everyone, I need some expert opinion. I'm building up my business' manufacturing shop. A substantial amount of the cuts I need to make are 6', for 1/4" Luan and 3/4" Plywood. I aim to build a table for my table saw with more than 6' cutting capacity. It's a Dewalt 2 phase 3HP Unisaw. I'll build the table around the thing and extend the fence with an additional section. However I've had some people tell me this is a bad idea because at such large sizes it gets easier to push the sheets through not quite straight. With such a powerful saw, this increases the chances of this thing hurting my worker/carpenter. Now I've mostly not really had kick back issues …
-
-
- 5 replies
- 3.4k views
-
-
Hello, I have started refinishing furniture but now it is too cold to work outside so I want to work in the basement. Is there a way to make is safe to sand and paint? I currently have a shop vac that I attach to my orbital sander but that is it. Should I tarp off the section that I'm working in? There are so many types of dust collectors and air cleaners that it is overwhelming. Our basement is one large open space with an office at one end. I've seen people put a furnace filter on a box fan, is that a smart way to go? Is sanding indoors just not a good idea? Any advice would be greatly appreciated!
-
-
- 5 replies
- 5.5k views
-
-
can anyone tell me if purchasing the Miter Express sled and adding the Incra 1000 miter gauge works out as the same as buying the Miter 5000 ? I don't have the funds to shell out on the 5000 at the moment and was wondering if I can just split the cost by buying seperately
-
-
- 31 replies
- 13.1k views
-
-
I have a Ridgid model 2424-1.. I’m having a difficult time and I just can’t seem to get the blade aligned to the mitre slot. It is .0029 out of alignment at the front of the blade,which is causing kickback. I used the same tooth for my measurements. I followed the Ridgid manual but the micro-adjustment with the tiny allen screws does not seem to be doing much and I’m running out of screw. I read in one of the only posts out there that the PALS micro adjusters won’t work with a 2424-1 model. I realize the fence must also be aligned to the mitre slot but will worry about that later. I can fix that. Any help would b…
-
-
- 7 replies
- 4.4k views
-
-
It never ends. It is part of the process. Repairing and replacing tools makes a better shop. There was chunk of carbide missing on my jointer knives. Sharpining was needed. The jointer is the starting point of most of my work. Truing up lumber is the job description of the jointer. When the jointer is down it depresses me. I don't want to break out some old planes. So I made arrangements with a skilled sharpener to bring my knives and wait. He had no problem with that and this morning was the time to do it. So in total my jointer was down for 3 hours. Didn't phase me. After carefully setting the knives I fired it up and was back in business on the first try. I ran an 8" x…
-
-
- 11 replies
- 3.4k views
-
-
Prior to building my Roubo Bench I had a bench made out of Noden Adjustable legs and a cheap top I bought at Woodcraft well after using this primarily as a glue up station for many years I have decided to change it up a bit. Earlier this year a purchased a couple of new vises; a pattern makers vice and also a gun stock vice I will mount them on this bench while continuing to use it as a glue up table. I need to beef it up a bit and also will add a till to the back side. Bench when I started Vises waiting for install First up I reduced the size of the top while squaring up all the edges. I used my Festool tracksaw and TSO track square to do this.…
-
-
- 19 replies
- 4.9k views
-
-
No, not Depends. get your mind back in the shop . I have a small shorts issue. Maybe a medium shorts issue. OK, a definite shorts issue. I controlled this at the previous shop with my "shorts tower". I had selected the location for the tower in the new shop long ago. When things get tall where I live they get secured. When securing for earthquake you are not so much trying to hold the item up as you are trying to prevent it from getting the idea of leaning over as far as the tipping point. That is, keep it from rocking. Imagine my surprise when the location I picked on paper before the slab was even poured turned out to line up with the…
-
-
- 10 replies
- 3.7k views
-
-
I am retiring next July and we are thinking about moving. My daughter and our grandkids just moved to Yadkinville, North Carolina and we are thinking about following. It is getting really expensive to live in the San Diego area and the California government seems bound and determined to tax us into poverty and take away our rights. Anyway, we are thinking about next October for the move. It is obvious that the humidity will be different that the relatively dry air in So. California. It will be several months to a year between packing my shop and unpacking in NC. Do you think drenching my metal tools with CRC 36 will be enough or should I be thinking cosmolene or some…
-
-
- 12 replies
- 3.4k views
-
-
I'm about to build a general purpose bench/table for my garage. I'm using reclaimed materials from my late father's massive custom installed book shelves!!! So I have loads of 2x1 and lengths of 20mm MDF (19.5cm x 117cm) (all with pre-existing screw holes of course!). The top will be three planks of this MDF screwed/glued to a frame (so 58.5x117) and end glued together. I also have an old sheet of hardboard which I plan to cut to size and attach to the top to create a smooth surface. A couple of questions: 1) What's the best way to attack the hardboard to the MDF: glue it or nail it? 2) What's the best way to seal/paint the hardboard surface (shiny sid…
-
-
- 5 replies
- 3.4k views
-
-
I'm getting closer to possibly builiding a 30x40 pole barn for my shop. It will have a 10' ceiling and the walls and ceiling will be insulated. Generally I would like to keep the temperature around 40-45 while not in there and heat it to around 55-60 when working in there. I also plan to spray waterbornes so I'll occasionally need to heat it to 65+. What options would you recommend and do they need to be professionally installed? We live on an acreage and my propane tank is very close to my potential shop.
-
-
- 25 replies
- 122.4k views
-
-
I know similar topics have landed on this forum in the past, but I haven't quite found the answer to a question. I have a 30x40x20 tall post structure shop with the ceiling being the only thing insulated and I want to install a natural gas ceiling heater. If you've gone down this similar path can you tell me what btu output heater you went with or would recommend? I live in the NW and want to keep the shop temp at 60 degrees. Any other recommendations I would love to hear. Thanks
-
-
- 2 replies
- 3.3k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·