Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Shop

  1. Started by Bombarde16,

    This is Harbor Freight's 2HP dust collector, stacked on top of a plastic cyclone from Oneida. Wasn't thinking when I picked out a can to use as a collection bin at the bottom. Even with nothing connected, this is what happens. https://youtu.be/elQVeCb2xjA Seemed like a good idea at the time and all that. Apply palm to forehead. Stronger collection bin on the way.

      • Like
    • 14 replies
    • 3.8k views
  2. Started by Shane Jimerfield,

    Hello, I'm likely moving into a new space soon. It will create a split shop situation for me. Machines in the garage, and hand tools and work bench in the studio. I mostly use hand tools, so this is ideal for me. I might bring the band saw into the studio as well - so I don't get lonely. Anyway, the studio has nice, fairly new oak flooring that I want to protect. I'll use some cushy mats throughout, but I'm thinking I should probably have a thinner, sturdier rubber like layer between the bench and floor (let's call it the sub-mat) to prevent skidding, and sliding of the bench. I would not want the sub-mat to stick excessively, or embed itself into the oak flooring (m…

  3. One of my early benches had this drawer unit in it. When I built a new bench it ended up a few places in the shop, most recently over by one of the vacs. It was full of all kinds of things. I took the drawers out and added some wheels. This must've been about when I settled on how I make utility drawers because I still make them like this . I had some white oak left over from a China Hutch I made someone years ago. I rip it into some usable parts. Some of it becomes a frame for the new top that I Domino at the corners. I rabbet the short pieces and stop rabbet the long pieces. Then I chop out the corners to ma…

    • 7 replies
    • 5.1k views
  4. Started by Chet,

    I use a Rubbermaid cart to move my parts around the shop. I decided it would be nice and also convenient to have a permanent first layer of stickes on the cart. No earth shattering high end wood working here, I just took an old piece of ply, dado some slots in it and glued in some strips and then screwed that to the top of the cart.

      • Haha
      • Thanks
      • Like
    • 11 replies
    • 3.6k views
  5. Started by collinb,

    The Rubbermaid 20 gallon is a nice fit for the dust deputy.

    • 5 replies
    • 3.6k views
  6. Started by Bombarde16,

    Just because I can. For reference, the actual Google logo used this font "Catull" for several years before switching to a sans serif font not too long ago.

      • Like
    • 9 replies
    • 3.3k views
  7. Started by JohnG,

    I made mention in another thread that I am reorganizing my shop, and I thought I'd post some things here. I currently have a 2 car garage as my shop. We are in a rental house because we had only planned on living in this location for 3 years. The garage doesn't have an automatic opener, so I was able to claim it (but I also need to keep other garage items in it as well). It's got bare studded walls and no insulation. It's not ideal but it gets the job done. I've added some shelves, but nothing serious or permanent, since it's not mine. It has gotten to be quite a mess because when we moved in, all I had was a jobsite saw and some hand tools and a few handheld power t…

      • Like
    • 18 replies
    • 6.1k views
  8. Started by Goober,

    I've been needing/wanting a good straight edge for setting up tools for a while. I was looking at 48" levels and started putting 2 edge to edge looking for light shining through and used a feeler guage. I had to go through their entire stock but I finally found them.The employees thought I was nuts but it worked. I got a dead flat 48" straight edge for 20 bucks.

      • Haha
      • Like
    • 10 replies
    • 3.4k views
  9. Started by JayhawkCRNA,

    So I bought a DC at an auction so now I need to plumb in the pipe. I have decided on 4” PVC Sewer pipe as the base runs with 4” flex hose as the last bit to all the tools in case I need to move the tools a bit. But my question is about the fittings. I can purchase the PVC wyes and elbows at the big box but need to find the connectors that would work to go from PVC to flex hose?

  10. Started by SawDustB,

    I've been using my table saw without an outfeed table since I got it 2 years ago. I'd love to have something, since using roller stands all the time is getting old. The problem is I have no room for one. Lately I've been thinking about having a very lightweight fold down table. There's a few things I want: 1. I want it to be very light, so it doesn't compromise the mobile base or make the saw tippy 2. I'd like to have about 30 inches of support from the back of the blade, since most things I cut are under 5 feet 3. I'm planning to fold it down for cross cuts, so I can avoid routing slots in it 4. I want it to be about 1/16" below the saw surface 5. It would…

      • Like
    • 37 replies
    • 11.1k views
  11. Hi folks - my beautiful wife and I are leaving the Pacific Northwest for the great state of Ohio (greater Cleveland area). My stationary shop tools have been in storage over a year, and this big move will finally allow me to unleash them once again in my new shop space, so that's exciting. What is less than exciting is the prospect of loading and moving the tools myself, as it is impractical (financially and logistically) to have a moving company do it for me. Thus I hope my plans outline below are sound, or I can be pointed in a better direction. The bulk of our furniture and other possessions will be moved in those "Pod" moving containers. My stationary tools will …

      • Like
    • 23 replies
    • 4.3k views
  12. Started by jamesgang,

    Near as I can tell Jet's "sandsmart", Powermatic's "eed logic" and supermax's "intellisand" all do the same function of slowing the in-feed rate of speed if you are trying to take too deep of a cut. I could see where this could severely damage a project piece going through the sander. Could this be a common problem? Taking lesser cuts being the solution, Is the sensitivity of this function in any of the above tools a problem?

    • 6 replies
    • 3.7k views
  13. Started by ..Kev,

    Now that storage isn't an issue, it's time for that panel sled that I've been wanting to add for a while! Pretty quick and simple build but, a lot of benefit!

  14. Started by collinb,

    To this point in my development the Dust Deputy is adequate. Adequate, at least, with respect to matching my equipment and the ability to extract material. What it lacks is collection volume. I'm thinking of taking off the top of a bucket, raising it up, and hanging a bag. Like a big units, but better matched for my smaller equipment. The reason for this is planing. The DW735 puts out so much fluff that it fills a 5-gallon rather quickly. Too quick for my tastes. I'd like to get to 10 or more gallons capacity. Anyone here seen this done? (Also, my compost bin is running out of space. I'm going to have to actually dispose my sawdust for …

  15. Started by gee-dub,

    I don't want to put people to sleep with an endless tour but, here's a few shots of the shop. This is a commercial cabinet that I'm sure I posted about retrofitting to make it more usable for me. The full depth pullouts keep me from losing stuff in this 24" deep beast. Here's a shot of the main work area. Several machines are mobile and move into this space as needed and move back out when assembly or finishing begin. Here's a shot back toward the position that the previous shot was taken from. The wall mounted tool cabinet is actually the right wing of my plane till/tool cabinet but, I never seem to get annoyed enough to re-work the oppo…

      • Like
    • 14 replies
    • 3.8k views
  16. Started by ..Kev,

    Time to address my storage issues for sleds in this shop. Seems I'm always trying to figure out where the sled goes when it's not on the saw!

      • Like
    • 8 replies
    • 4.1k views
  17. Started by wdwerker,

    A year or so ago I knocked out a prototype out of scrap western red cedar. This morning I decided to build a better version with replaceable sacrificial face boards. A few minutes of math to get the most out of a leftover plank of 5/4 maple and I ended up with this shop accessory plus 7 spare faces. This set up lets me keep shifting the entire assembly over about 2" to get a series of fresh cuts to back up new cuts before I replace the face board. Rear view. I made a hardware store run for acorn nuts to protect my.......... The whole assembly bolts to the fence with a couple " Tee bolts " Hey Mel this should work on your sliding crosscut…

      • Like
    • 3 replies
    • 3.5k views
  18. Hi all, looking to to finally mount my Bosch router to my Jet tablesaw extension and get rid of my router table. My question is what material(s) to make the table extension out of. A Kreg router insert is on its way. I have the malamine sheet (no wood behind it, just the skin) that I can glue on top. For the substrate I am thinking 3/4” MDF on top of some kind of 3/4” plywood: MDF for flatness and stability and plywood for structural strength. am I on the right track? What kind of plywood should I use?

      • Like
    • 21 replies
    • 9.1k views
  19. Started by houstonjc,

    I'm between projects and the shop is finally clean, so I thought I'd show it off. We bought the house in no small part of the garage. It came fully loaded with heat, AC (important in Texas) and a bathroom, though I rarely run the AC due to cost. In addition to there bays (2 of which usually hold cars), the builders added a 23'x11' raised extension on the back. It holds most of the shop. I added in more electrical and lots more LED lights. I don't have a proper bench, but have built a large torsion box assembly table. I've added a pipe wrench moxon vise and machinist vise for now. It's built on top of an old flakeboard desk. …

      • Like
      • Thanks
    • 6 replies
    • 5.3k views
  20. Started by ..Kev,

    My shop was getting seriously out of shape! Time for some much needed maintenance! A little early this week but, I'm off for work again tomorrow and need to get my packing done!

      • Haha
      • Like
    • 4 replies
    • 3.3k views
  21. Started by Ron Hampe,

    I recently bought a large cnc and to accommodate it need to relocate my shop from the basement to our 1400 sq. ft. detached block garage. This will require adding a new 200amp service, insulation and an hvac system. Hope to have the walls and wiring done soon and while I really like the idea of using metal panels I am concerned about the noise both inside and out of the shop. It has two bays that share the same roof line. One is 12' high with a 12'x 12' door and the other 8' with 3 three 9'x 7' doors and I plan to add removable exterior insulated panels in front of the three smaller ones. Nearest neighbor is 400 feet away but we are on top of a hill with few barriers to d…

    • 5 replies
    • 3.4k views
  22. Started by Belle City WW,

    Some pics of my Basement Shop. John

  23. Started by estesbubba,

    I've recently installed some Ring spotlight wired cameras on our property and so far happy with them. I installed one in my shop which covers the overhead door, front door, and all the windows. The night vision is decent with the spotlight but Ring has a new firmware coming out that that enhances the night vision and adds color. The spotlight and video recording is triggered by motion and can also be manually controlled. All video is stored in the cloud and installing and setting up the camera takes 5 minutes. For $100/yr you can have unlimited cameras store unlimited videos for 60 days. We live about 15 miles from the city and haven't had any crime problems but tha…

  24. Started by Cliff,

    I only started in February, and the tools expanded so insanely fast that I was unable to walk in my garage due to the amount of tools and wood everywhere. So something had to happen. So I decided that with the exception of x-mas gifts and finishing my smoker cart, everything I do from now until spring is shop improvements. Original garage- 2 outlets on 15 amps from the house. Both on one wall. I had to run extension cords to everything, which was an incredible pain in the ass. And very few things could remain plugged in. No walls unless you count some plywood on the back wall. Floor is cracked and sunk in many areas. Completely impossible to have anything level. Firs…

      • Thanks
      • Haha
      • Like
    • 174 replies
    • 40.1k views
  25. There seem to be two versions of these flip top stands that are most common online. One uses some eye bolts and star knobs and the other uses barrel locks. Like so: I had an idea on how to do it a different way that I thought was decent so I'd thought I'd share. Use 4 hinges at each corner with a small block attached that will support the top and prevent it from spinning when all 4 are "closed". I just did this today so no idea if it will hold up but so far it seems fine. A short movie is the best way to explain

      • Like
    • 14 replies
    • 6k views

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.