Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Shop

  1. Started by gee-dub,

    I spared you all my miserable progress on day 1 and 2 . New location. I had to gather up a bunch of the stock that I had been stashing at friend's and relative's homes. I had probably overstayed my welcome but, made up for it with the usual trinkets we woodworkers find to gift folks with so, all seems well. When no one was looking I appropriated one wall of a storage shed out back. I built a similar vertical storage rig to those that I "placed" at the previously mentioned friend's and relatives homes. I promised to go back and remove them . . . It is only partially full and the trailer is almost empty. I am hoping those two situatio…

      • Like
    • 11 replies
    • 4.1k views
  2. Started by man of wood,

    It's time to wax my bench, and I have some soapstone sealer and was thing of using it. It seem to have a very hard finish. It's made with walnut oil and pure Carnauba wax. My question is...... Do you think this will mess with any of my stains or wood projects in any way????? this stuff takes 5 to 7 days to cure........... do you think it would be good on my machine too??? thanks Thomas

      • Like
    • 9 replies
    • 3.7k views
  3. Hello everyone, I'm just getting started with woodworking, and I have a great uninsulated barn I was thinking of using, but I'm afraid my tools and equipment will get wrecked in the Maine winters. Is there anything I need to do to make sure everything's OK when I get back into the shop in the Spring? Eventually I'll build in new walls with insulation, but I need to get the house finished first! Thanks!

      • Like
    • 15 replies
    • 4.4k views
  4. Started by collinb,

    Picked these up a while ago and finally got around to mounting them on my bench. They should do the trick for a while.

      • Haha
    • 2 replies
    • 3.3k views
  5. Started by JasonS,

    Does anyone know where to get the pegboard hooks Rocker uses in their retail stores? I used to work for Rockler and they're the best hooks I've ever used, but I don't remember the manufacturer name and I can't even find an image of them on the net. I'm several hundred miles from the nearest Rockler store and a phone call to one got me the answer that they come from Rockler's warehouse (which they do, but doesn't help me). Anyone have any ideas?

    • 16 replies
    • 4.4k views
  6. Started by estesbubba,

    I have a 36" floor broom which works good on the concrete but not as well on the anti-fatigue mats. I was wondering if anyone vacuums their shops for areas like mats, under machines, and hard to reach areas? If so what do you use? I have a Festool CT26 but don't know if that's good to use on floors and the bag cost isn't cheap. What about a plain old shop vac, backpack vac, or ??? The wider the floor nozzle the better.

  7. Hello all. I've been lurking and reading here for a couple of months now. I am very new to woodworking and I'm putting together a shop mostly from garage sale/craigslist items. I got a 12" Craftsman bandsaw that has been in storage for a number of years. It runs well but needed some tuning up. I have put new tires and thrust bearings on it so far. While aligning the blade I discovered this issue. the blade rubs against the upper blade guide (not the insert!). I have a few pictures that hopefully show the issue. I am not sure what the cause is? Is the blade guide worn out? Is the blade guide bar/bracket worn out? the last one is the lower blade guide as a c…

  8. Started by Mick S,

    https://www.instagram.com/p/ByAWTvrC4Ha/

      • Haha
      • Like
    • 18 replies
    • 4.4k views
  9. https://garyweeks.com/company/our-shop/custom-machines/ I've recently been fascinated by shop-made machinery. Specifically I would like to build a stroke sander one day. Philip Morely has a cool one in his small shop, and various FWW authors throughout the years have had the odd gem. Gary Weeks' shop has some seriously cool shop-made machines though! I thought folks would enjoy seeing them if they hadn't already. His "straight line machine" (edge jointer using a shaper spindle) is also interesting.

      • Like
      • Haha
    • 6 replies
    • 4.6k views
  10. I am going to vent outside but i need a hard 90 degree elbow and there doesnt seem to be any 5" elbows The measurement on my outlet is 4.75" you guys know of anything that will give me ridge 90 degree eblow that will work with a 4.75" outlet?

    • 5 replies
    • 4.2k views
  11. Started by curlyoak,

    2 months to get to this point. Dealing with architect and county. Rules here are very tough in Florida. Due to past hurricanes. So good rules keep home owners ins cost down. But they get carried away. Like what is the historic water flow on the property. But that time and money for nothing part is over. It gets inspected tomorrow and poured next week. The elevation wall in the pic is 12' and the other wall is 15'. One back door at the far end of the 15'. Lumber and plywood storage behind the garage door. Yard tools in the back door.

  12. I've got a Super Dust Deputy Deluxe hooked up to a Rikon 1hp and venting outside. I use 4" flex hose with a Dust Right Quick Change adapter that I move to my machines. When I use the drum sander I'm getting dust out the end, and not feeling like I want to do that to my neighbors or myself. (I don't use the DS tons, but when I do I feel badly) I got the SDD hoping it would capture the fines, but alas not so much. I'm wondering, is it matter of not pulling enough air through the system that the SDD is not able to better capture the fines? Or am I destined to put a filter on the system? If I ramped up to a 2hp Grizzly and vented it outside through a 4" would the SD…

      • Like
    • 24 replies
    • 4.8k views
  13. Started by Marcus Hand,

    Last year I bought a used Powermatic dust collector (it is the 3HP dual cannister one). I hooked it into my existing 4 inch PVC pipe system to get it up and running. It has been ok, but as you can imagine, not great. I’ve just gotten around to upgrading to 6 inch pipe. I’m trying to avoid using flex hose as much as possible. Ideally, I will only need to use it at the very end of each run, when I connect to the machines. The problem is that the footprint of the DC is already pretty big and if I run hard pipe right up to the DC, it makes the footprint even bigger. What I would like to do is run hard pipe down the wall and then have about a 2-3 foot section of flex hose…

      • Like
    • 3 replies
    • 4.4k views
  14. I have a Sawstop TGlide fence. When I take it off the saw table when cross cutting long workpieces, I'm currently just setting it on the workbench, where it is quite in the way. I was pretty surprised when google didn't show me a single picture of a wall mount when searching for "wall mount biesemeyer fence". Is there a reason to not hang these on the wall? Or are the mounts just so boring as to not warrant any pictures on the internet? haha I'm just curious what you guys do with them. And if you post a picture it'll be the first on the whole internet!

  15. Started by Tobykanobe,

    So I'm totally excited about two new acquisitions from a local dispatch center that is getting a re-model. They are tables that raise and lower to a desired height. One of them I want to take the existing press board off and use as an out-feed table for my PM table saw. The other will be converted to a fabrication table. I plan using just a 4x8 sheet of plywood in a landscape orientation to the table saw. My question is if any of you would recommend those ball bearing swivels so that the piece off-feeding just glides over the balls. (See link) Am I overthinking it? Would those balls get dusty and eventually not roll anymore? Thoughts?

    • 8 replies
    • 3.9k views
  16. Started by derekcohen,

    This is what I did for my K3 sliding tablesaw: Melamine-covered chipboard ...This section connects to the outfeed table ...These bolts were used as supports on the chassis side ...This is the side with the table levelled, but not attached ...These are bolt holes for a rail (for the extension table) that will be used (later I attached the rails over the bolts to be added) ...I drilled a length of 3mm aluminium for a support ...Attached to the chassis ...The rail (for the extension table) is placed over it ...Screw the aluminium to the router table - this supports it on the far side (it is supported on the opposite side with bolts into the outfeed). And replace the ext…

  17. Started by SteveKoz,

    Can someone share what part they used to connect 4" PVC to 4" flex hose? Right now I have a 6" to 4" SDR reducer with bells on both ends. Would like to have a connector that I can screw on a 4" flex hose. Can either fit into the bell of the 4" or I can put a short piece of 4" pvc into the bell and then insert the adapter. I purchased one on Amazon and it doesn't fit. Instead of trial and error I figured I'd ask the group. Thanks for the help!

      • Like
    • 16 replies
    • 6.5k views
  18. Started by TheAverageCraftsman,

    Been at it for a couple years now and have my shop in a pretty good place. Lots left to do but I like the direction it's going. Would love to hear any feedback!

  19. Started by SeventyFix,

    What kind of lighting do you use in your shop? I have 2 4-tube fluorescent fixtures in a 3-car garage. I'm thinking of replacing those 2 fixtures with 6 LED fixtures for better light. Advice is appreciated from anyone who has already researched and tackled this issue. The shop improvement project marches on.

  20. Started by ..Kev,

    Could have dropped this one in a few places here on the forum but, I think this is most appropriate.. With the new saw, I needed to rework a few sleds and completely rebuild a few other TS fixtures.. There will be 2 videos and the first one is just reworking my most commonly used sleds..

      • Like
    • 9 replies
    • 4k views
  21. Started by SteveKoz,

    I’ve Decided on the Oneida V3000 dust collection system. The inlet port is 7 inches and I want to connect it to 6 inch PVC pipe. The 6 “ side should be a female connection and the 7” side should be a male connection. Anyone know of a source for this? Adapting PVC to DC duct plumbing seems to be a challenge Thanks.

    • 4 replies
    • 5.4k views
  22. Started by Bombarde16,

    I tore my shop apart today. The little window circled in red is a cubby hole for my miter saw. Essentially, I'm making a station for my 12" SCMS but I don't want to give up the 24" (or more) of depth that such an installation typically consumes. Since the other side of this wall is merely the back corner of the furnace room, I decided to sink the saw halfway into the wall. Build a large plywood box with a hole for dust collection, frame it into the studs as a pass-through, then cut out the 1/8" panelling with a laminate trimmer. Still needs a back and an electrical box, plus some tables on either side. But the initial results look like a major improvement: Betw…

      • Like
    • 5 replies
    • 4.2k views
  23. Started by SteveKoz,

    Does Oneida provide any coupon codes for free shipping or % off on their DC system? Figured I'd ask before order. Thanks

    • 3 replies
    • 3.5k views
  24. Started by Chestnut,

    I've been kicking around installing a floor sweet for the DC and am wondering what people's opinions are on the manner. Is it a good idea bad idea? I don't know what it would hurt but thought i'd throw out to the collective wisdom.

  25. Started by ..Kev,

    Now that the shop's up and running, thought I'd toss out a shop tour. Lots of changes coming for sure! https://youtu.be/5SpWamWnFc4

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.