Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Shop

  1. Started by Trip,

    OK, there's a joke here someplace, but we'll just ignore that... I wasn't planning a tip for today, but winter's finally arrived in the Northeast (El Nino) and some maintenance items have cropped up... Got me thinking about a new tip... Now, one of the first things to annoy me about the arrival of winter are xMas decorations before Thanksgiving... This is quickly followed by repairing old chairs whose spindles have come apart and at least one mallet in my shop developing a loose head... What do chair spindles and mallet heads have in common – we’ll there’s the proper way to fix them, then there’s polyethylene glycol (PEG)... The traditional solu…

  2. When I was finishing my shop a year ago, by the time I got to painting I was ready to just be done. Ten high output 5000K T8 fixtures along with the satin white make it nice and bright. I like the light but sometimes wonder if I should add some warmer colors to the walls? I love the look of the wood on @Janello's shop but that just isn't going to happen. Today I took of piece of the main outside steel to a local paint design center and the lady was very helpful. She gave us some swatches and my wife and I both liked the grey's that had the building color mixed in. The lady said the building actually has some green in it and the grey's have some earthy colors in them. Fir…

      • Like
    • 24 replies
    • 4.7k views
  3. Started by Jim DaddyO,

    I got a good deal on a Mr. Heater tank top propane heater to get me through this year. Unfortunately, they sent a bolt that was too short to fit the brace for it. I don't know it is a quality control, design, or engineering issue, or if someone thought they would save a couple of cents on each unit. All I know is that they got it wrong, and that is about the way some companies think of their customers these days. I am disappointed that an otherwise good unit would have something so simple overlooked.

  4. Started by FlyinFish,

    I decided to clean up the shop a bit and make a bench for the wall where I basically just stacked a bunch of plastic drawers when me moved in and had a crappy metal shelf that came with the house. I also wanted to get the folding miter saw stand stored away, but still have the saw out and accessable. The before shot with most of the clutter already cleared out. I used "premium" fir 2x4s and 4x4s. Nothing fancy. I decided to bolt the frame for easy disassembly if needed and then screws for the rest. I used GRK screws for the first time and they were a joy. Worth a few extra bucks. Added the insert for the saw and made a quick box for drawers with 1…

    • 2 replies
    • 3k views
  5. Started by RichardA,

    Back in October of 2014 I was working on a dresser for my wife.. when my back went to hell. After surgery and a time for recovery, I was back in shape to get back to work! My wife, said that since I have such a difficult time building larger projects in 108 sq ft of space, why don't we try to find a building large enough for larger pieces to get done! Well, I did! I started looking, and nothing I could find was capable of getting into the only space I had available! So, we built! We built a 14' x30' building and dedicated 8' to all the garden tools, that left a 14' x 22' space for the shop 308 sq ft almost 3 times what I had! This is the result... It's no show p…

  6. Started by Lofty,

    Hi Everyone - New here. In the Seattle area, been woodworking for 5 years but have been spending a lot more time in the shop the last year. Starting to use a lot more hand tools which is fun. I'm looking for opinions on pros/cons of making a couple significant tool purchases or instead renting shop space in a cabinet shop. I have a two car garage shop with a decent selection of all power tools (table saw, router table, drill press, band saw, mortiser, 6" jointer, 13" planer). I feel it's time to upgrade to at least an 8" jointer and 15" planer with spiral cutterheads. The 6" jointer is limiting and generates waste since most of the boards I purchase ar…

    • 10 replies
    • 3.2k views
  7. Started by tcarswell,

    Sorry for the Chitter chatter in the background also sorry for the awful camera work My shop is straightened up now all the rosewood is on the big shelf stickered .

      • Like
    • 11 replies
    • 3.1k views
  8. Started by TerryMcK,

    Somebody posted a link to Alain Vaillancourt's ongoing shop build on a UK Woodworking forum. Alain resides somewhere in Canada. The start of his video series, in bite sized chucks, is here. Looks great to me so if you haven't seen Alain's excellent work before I thought other shop builders may find it interesting. I've already rebuilt my shop from ground up (back in 2012) so am watching it for nerdy entertainment only. Also I like to see the difference between Canadian code and UK code in construction.

  9. Started by sheperd80,

    Its been another fairly productive weekend in the shop. Ive been using a horrid old bench top router table for a few years now so it was time for an uprade. So i amazon'd a PC 8902, the lift knob, and a Kreg insert plate. I realize the knob and insert couldve been done DIY or atleast cheaper, but it just looked like such a nice easy setup. It'll make a handsome addition to the G0690. What a cool setup. $30 is alot for a knob, but its not alot for above table adjustment and bit change imho. . The table is a simple plywood box covered in paint. Its slightly larger thn the saws original extension so i added mounting holes to the fence rails to reduce the canti-lever. …

      • Like
    • 4 replies
    • 3.3k views
  10. Started by Robby W,

    For some reason, I have been really productive lately. This weekend, I finished a couple of tool cart cabinets. About a year ago, I upgraded my hollow chisel mortise from an old AMT unit that I inherited from my father. It had seen better days and I couldn't get spare parts for it, so the AMT went to a new home with another woodworker and I treated myself to the Powermatic bench top hollow chisel mortise. When I go it, I unboxed it and it sat around on various flat surfaces. I finally got tired of moving it around and designed a tool carts with storage under it. I included enough space below the bottom drawer to house my venturi vacuum pump and the vacuum bag that goes wi…

  11. Started by z29reg,

    I am sure this has been posted but wanted to get some ideas and suggestions, thanks in advance. My father passed away two years ago and I inherited a bunch of tools from him and have really just gotten started into wood woodworking, he was a very skilled wood worker. I have always been interested in wood working however never really spent a lot of time getting to know all the different tools etc. After college I moved to Charleston and my parents were in ATL so never spent enough time with him on projects to learn a lot. I have several routers, joiners, planer, radial arm saw, etc etc.. I also took his benches from his old shop when they sold the house so I have a…

      • Like
    • 9 replies
    • 5.9k views
  12. Started by Robby W,

    A couple of weekends ago, I was installing my Grizzly bandsaw fence on my Jet 14" bandsaw when the table wobbled. I reached under to tighten the trunnion clamps and the trunnion came off in a handful of pieces. This bandsaw is about 15 years old and the trunnions were made as an aluminum die casting. I ran down to my local Jet dealer and ordered replacement parts, but I had a bunch of Cub Scouts coming over to work on their Pinewood Derby cars and the new trunnions wouldn't be delivered for 2 weeks. Not wanting to disappoint them, I decided to cobble up a fix. I took a chunk of hard maple I had laying around and machined a couple of dadoes to create the ears that wou…

  13. Started by bushwacked,

    Well at least someone around here is getting new things. The plan ... Her garage ... Taking out the shelves in the far back and building new shelves and a work area along the back and right side wall Then going to paint the floor as well for her. Some nice grey to make it at least look nice again. Starting out ripping the shelving from 7/16 OSB. And all done. Then on the breaking down all the 2x ... And off to lunch I go before I head to HD for a few more things

  14. I opened my shop Saturday morning for the first time this year and discovered I had no lights. After poking around in the breaker box I was able to get the dedicated circuit I use for my saws back online but the other circuit is shorting somewhere. My instinct is that the short is in the buried cable between the breaker and a sub-panel. When I shut down all of the breakers in that sub-panel the circuit still shorts and trips the breaker in the main panel. I guess my next shop project will be a 20 yard ditch and my next shop purchase will be $600 worth of copper cable. That DW735 would have looked so much nicer...

      • Like
    • 14 replies
    • 3.3k views
  15. Started by PWRFULZ3R0,

    Which would you pick? Sent from my iPhone using Tapatalk

      • Like
    • 17 replies
    • 4.6k views
  16. Started by amateur eric,

    My wife and I may be moving to New York in the future. Just getting a shop in Alabama started now so it'll be a change for climate and what not. I've had issues with warping on some oak before in Alabama due to weather fluctuating badly. What do I need to do to prepare ahead of time on what to look for or what to build to make sure my stored wood doesn't warp on me and waste good stock. Sent from my iPhone using Tapatalk

      • Like
    • 19 replies
    • 3.6k views
  17. Started by Matt73,

    G'day all, I'm wondering whether anyone here can recommend any good sources of woodworking equipment in Australia, and also preferred brands of equipment. Bunnings doesn't seem to cut it. I'm a beginner, and want to set up with some basic tools, but also want to invest in a table saw, planer/thicknesser and potentially a band saw. I'm willing to hear any suggestions on what else you consider essential items. Thanks for helping, Matt

      • Like
    • 12 replies
    • 3.7k views
  18. Started by Stricklines,

    I am just getting started in this hobby. I have built two loft beds and all of the furniture for kids rooms but am looking to get into some nicer furniture for our home. This is the start of my one car garage shop. I'm looking for a lower price alternative for dust collection and also a planer and then a jointer. I have a friend with a jointer and planer but it is very inconvenient to travel to use his equipment. Any comments or suggestions are welcome

  19. Started by rodger.,

    Right now mine are in a drawer, but taking up far too much space. Plus, I would like them to be more easily accessible. How/where do you guys store card scrapers? Pictures would be appreciated!

      • Like
    • 8 replies
    • 6.5k views
  20. Started by Paul Edgar,

    I have a small shop and am a party of one so that only one machine is ever in use at one time. I have been using a Rockler Cyclone bucket at- tatched to the above Shop-Vac. Up until now the results have been satisfactory. My question to the group is: faced with a new purchase, what are the recommendations of the group without installing duct work and gates and the like. There are some expensive dust collector out there with different reviews. Can I get by with another vacuum or should I take the plunge? I don't think the old Shop-Vac liked being run for extended intervals....RIP

  21. Started by Robby W,

    While working on some shop cabinets this weekend, I decided to break out my #4 smoother with the newly sharpened blade and use it to smooth all of the trim instead of sanding. The smoother did the job very nicely, but as the work went on, my back started to get sore from bending over. When I built the bench umpteen years ago, I read up on all the different ways of determining bench height and came up with 36 inches, which has worked well over the years. As I get older, I seem to be hunching over more to see what I am working on. I am short (was 5' 8", but now 5' 7") and have short arms to boot, (I don't recommend this combination if you have a choice), but I am serio…

      • Like
    • 10 replies
    • 3.7k views
  22. Started by trialbyfire,

    Hey y'all, I'm new to the forum/woodworking and would like some advice. I'm planning on redoing my shop from its current state of Hodge podged storage/tool arrangement. I was planning on making 1 wall (+/- 19') a long bench with a recessed miter saw/planer area to allow the wood to be cut with out having to set up saw horses. I'm also thinking about adding uppers for additional storage. In this bench Im planning on using the last 4'-5' as a roll out tablesaw station with some flip up outfeed tables. What are some storage features that y'all enjoy in y'alls shops? What should I avoid? Sent from my XT1585 using Tapatalk

    • 4 replies
    • 3.3k views
  23. Started by woodsmoke,

    I'm running a 1 1/2 hp dust system with a canister. Most of the runs are 4" metal with 4" flex to machines. This system has ALWAYS worked well without problems....until this week. I have worked 100% hardwood until this week when a project that is using 80 BF of pine was tackled. What a mess. I was planning these 12" wide 4/4 boards on a Delta 12 1/2" planner. Right at the entrance to the dust collector there is a wire guard to stop large chunks or debris which was collecting the pine shavings. This would build up in a hurry, shut down all chip removal, and jam the planner. Never had this before. I figure the cause was high chip load…

      • Like
    • 4 replies
    • 3.2k views
  24. Started by ColinF,

    ok, I need a solid workbench. While the Roubo is nice, the shaker style bench looks like it would meet my needs for storage and being a solid bench. My question is about omitting the vises. I do plan to do some handwork, but I don't see myself surface or edge jointing long boards, what I'm thinking of doing is replacing the leg vise with a veritas twin screw which I think would be more practical for me over the leg vise. So how difficult will it be to work around this working from the benchcrafted plans?

      • Like
    • 25 replies
    • 9.2k views
  25. Started by Dnorris1369,

    I'm starting to get my shop kinda like I want it. I'm still trying to figure out setup. I was going to get nordfab to hook to my cyclone. My question is should I try to come up with an exact setup and use their design service or start ordering parts and just kinda wing it as I go. I've been using a small rockler unit to get by as I start building a few things but that is getting old real quick. Any advice or suggestions much appreciated. Sent from my iPhone using Tapatalk

      • Like
    • 15 replies
    • 5.2k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.