Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Shop

  1. Good afternoon, My shop space has insulated walls and I just blew r36 in the attic. I am thinking the garage doors are a weak point. Can I add insulation to the door itself? Rigid insulation? Another product? Also wondering how to test for draft? Sent from my HTC6500LVW using Tapatalk

      • Like
    • 19 replies
    • 9.9k views
  2. Hey guys. I have a 12'x16' wooden shed I bought from Lowes. I upgraded the floors from OSB to 3/4" Treated Plywood. Boy those boards are heavy. Anyway,.. Under the plywood I made a treated wooden frame out of 2x4's. Under the framed 2x4's are treated 4x4's timbers. Under that is my crushed concrete base that is about 3"-4" deep. Now around the outside edges of the shed, I sealed off the openings and made a skirt so to speak with treated 2x6's so that no animals get under there to lay eggs or whatever. So there's no opening anywhere around it. Now, during these cold months, Ive noticed, what i think is moisture under some 2x6's and some 2x10's boards I had layi…

  3. Started by LoneRider,

    I've got an 18x24 detached garage I call my shop. Over the years as the number of tools increased I hit the breaking point where I no longer had enough storage for all the extra hardware and tools. Something had to be done. Many years ago I build 2 carts, one for plywood, and one for dimensional lumber and scraps. They both wound up being conveinent places to hold crap, and consuming floor space at that. So about a year ago I start the shop makeover. Including insulation, better lighting and storage. Finished the painting last fall, and time for the more interesting parts. Attached are the old carts First the dimensional lumber/scraps And of course the…

  4. Started by Mike M,

    I have a 2hp Grizzly Cyclone dust collector supporting my shop for over 5 years. I recently had a situation where the plastic bag came loose. I reattached it, but noticed that when the collector was running the pressure on the bag was quite high - not quite a basketball, but harder that a well inflated balloon. Even though I have been using the cleaning brushes in the filter regularly and occasionally using compressed air, the filter had clogged up to the point where it was costing several pounds of static pressure. Rather than replace the cartridge filter, I decided to replace it with a bag filter system. I purchased 8 bags measuring 6 inches in diameter and 64 …

    • 3 replies
    • 3.5k views
  5. Now that the kids have all moved away I am finally able to start on improvements in the shop. The second of which is the basis for my question. My garage (aka the shop) is concrete block and I am trying to determine the best method for attaching a lumber rack. My lumber has been stacked against the walls until now.... Thanks in advance, Chris

      • Like
    • 13 replies
    • 7.7k views
  6. Started by LoneRider,

    With the completetion of the new wood cart, lighting, paint, insulation and better storage, it is time to introduce my shop. Here is a panormaic image of it I still have a lot of work to do before it will be a productive wood shop. As you will soon notice, I don't like hanging tools on the walls, and I need to keep everything mobile so I can get my truck in there for maintenance. The next step is to build a cart under my outfeed table. Right now it is being help up by a pair of stands.

  7. Heys guys. So I have a 16x12 wooden shed from Lowes. I love it! My doors are made of OSB and painted on the outside. Above the doors I installed a 2in metal ,......oh crap,...now Im actually forgetting the name of it,..,...HUFF,..but it draws the raiing away from going in the shed from above. Huff,..anyway, thats not the issue. I was just drawing a picture. My situation is when I want to work in there, while its raining, I want to protect the interior side of the osb doors while I keep them open. I don't have any windows yet so thats the only way to keep cool. I was thinking of that black plastic stuff landscapers use. Its not too pricey and its lite weight …

      • Like
    • 8 replies
    • 3.3k views
  8. Started by Dnorris1369,

    hey guys newbie here. Just looking for some tips on dust collection I only have a few main power tools right now (jobsite table saw,small porter cable planer, miter saw and looking to add router table) but would love some advice. I dont know the first thing about dust collection I see alot of people say just get a shop vac and hook up to each tool as you go along. is this a good way for me to start for now??

      • Like
    • 10 replies
    • 4.1k views
  9. Started by chrisphr,

    Built this last week, designed to easily adjust the direction and angle - thought was I could use it to cool the shop down in the summer, duel purpose. Used a remote control switch to operate.

    • 2 replies
    • 4.1k views
  10. Started by Dnorris1369,

    Hey guys starting on moving stuff and arranging my shop. Just looking on tips for power tool locations and setup. Currently I have a miter saw on wheel cart. Dewalt Jobsite table saw. Porter cable portable 12.5 in planer and going to add router table in near future just looking any suggestions. Thanks guys Sent from my iPhone using Tapatalk

  11. Started by Madkrafter,

    Hi everyone. I'm kinda new around here. I finally got my shop up and running after several years in storage. I submitted my shop to TWW about the same time as signing up here so I chose not to double up here. I've done woodworking a long time but have never joined a forum. Lately, I've specialized in shop stuff. Here is my newest garage workshop... http://www.thewoodwhisperer.com/shop-tours/tims-workshop/ ~Tim (aka Madkrafter (...and Kapps))

  12. Started by Pbmaster11,

    I have a 100 amp service in my shop. all 20 amp breakers except for 1 15 amp that services the exterior lights. On one breaker I have added 5 two bulb t8 fixtures and a 54" ceiling fan. This breaker is also connected to a few outlets. I am concerned I won't be able to use a large machine on these outlets if I have the lights on. I have calculated roughly 4-5 amps total for the lights and fan. I am thinking of smaller machines, sanders, 14" bandsaw, drill press... could it handle a jointer or planer on the same breaker? Oh and another question, I currently only have 110 tools... I would like to have an electrician or myself run conduit on the walls and install 220 around …

  13. Started by tdh36185,

    I am moving and increasing from a 10x20 shop to a full 2 car garage . Live in Midwest (Omaha area) looking what changes I need to be aware of moving from a basement to a garage. Should I look into insulating? Flooring?

      • Like
    • 8 replies
    • 2.9k views
  14. Hello everyone, I'm here fishing for some insight into the shop build process, literally from the ground up. I'm buying a bit of land next to my home (in town) and plan to build a 24'x40'-ish shop. I will be building it myself, with a little help from friends/family, and I only have limited framing experience (have only done interior wall framing when finishing my basement, wired it as well). It may have to do a little double duty storing lawn equipment, bikes and the like, but it will primarily be a shop. I woodwork in a semi-professional capacity (haven't quit the day job yet) making furniture, built-ins, etc, and would like to eventually get into cabinetry. So …

    • 6 replies
    • 2.9k views
  15. Started by dwacker,

    Anyone know how much room you need in front of one of those tube looking propane forced air shop heaters. Im thinking about picking one up to help warm it up in the morning. The shop heat does fine all day but we start at 3:45am and turn the heat down at night so its pretty darn cold and takes awhile to get warm.

      • Like
    • 22 replies
    • 5.8k views
  16. Started by David Turner,

    I am going to build a new assemble table, right now i have an assembly table/work area/junk collector...So i finally decided its time to make a dedicated assembly table... The problem is I dont really know where to start... I do know i want it fairly large, I want to be able to use it as an outfeed table for my table saw so i know it has to be 38 7/8" tall.. This will make it an 1/8" shorter than my benchtop table saw I have on a movable cart. Where I am not sure of is how long and wide it should be, i have a area in my shop that I want to put it and it is around 8ft x 10ft. I know i am going to put casters on it so it can be moved if need be... I was thinking of…

      • Like
    • 22 replies
    • 13.1k views
  17. Started by Tony Wilkins,

    Have a retirement date in a month. Have a house to move into. And most importantly, I have a new place to have a 'shop'. It's just the third stall in the garage but it's better than my small space carved out of our current one car garage filled with boxes. Here's a pic of it while the house was being built: DSC_5141.jpg by Texchappy, on Flickr I had the garage and the garage doors insulated and a window put over where the bench will be (when I build my bench). Haven't put any heat or air in yet but I'll live with it and see what I think will do the trick. I've got a spot in the backyard for an eventual separate shop but that's a bit of saving down the way.

  18. Started by Eric.,

    That wood crap is overrated anyway. Careful who you pick for friends and feed beer to, fellas. I just discovered this when I was taking these pics. What a goofball.

      • Like
    • 8 replies
    • 3.1k views
  19. Started by estesbubba,

    We live on 2.25 acres and eventually I want to build a post-frame building for a woodworking shop, maybe sooner than later. Anyone on here have this type of shop? I'm going through the early research stages but looking for any advice - size, heating, shop considerations, etc. Any input and/or links would be appreciated.

      • Like
    • 15 replies
    • 9.1k views
  20. Started by Frede,

    Been away from woodworking due to elbow tendonitis. Seems dust collection has come a long way so I'm revisiting mine which is probably considered "chip" collection these days. Anyway, I have a Delta 50-850 1200 cfm with Oneida 1 micron bags. I'm running 2 gated mains of 4" PVC. One leg (18' long) goes to a jointer, miter saw, router table and drill press in that order - all gated. The other leg (8' long and gated from the other leg) is straight to my table saw using a PVC elbow. Budget prohibits and new DC but I want to improve things where I can. At this point I am focused on my TS which is a Jet Cont Saw - photo below. I see there's several methods of impro…

    • 8 replies
    • 4.1k views
  21. I'm looking for app suggestions for tracking time and expenses to a project in IOS. I'm currently playing with the free version of Office Time. The paid version looks like it has most of what I want, but am open to suggestions before I buy. What app are you using? Thanks!

    • 15 replies
    • 4.9k views
  22. Hi all, I am new woodworker and novice forum poster looking for some DC advice. I have a Delta DC unit that is 1100 or maybe 1200 CFM suction. I want to make a run of pipe that travels to a 9' ceiling then ~20' across and back to down ~6' feet to my planer, jointer, and miter station. I will be running just one tool at a time so all of my proposed blast gates for the other tools will remain closed. Do you think the DC has enough suction to accommodate my needs? I have a standard 20x20 2 care garage that I am turning into the run of the mill amateur wood butchers shop. I appreciate any insight you all have. Please let me know your experience and thoughts. …

    • 14 replies
    • 6.4k views
  23. Started by J Kunz,

    Hey All, Was hoping to get some feedback and possible ideas on a project I'm working on. I'd like to build a mobile work bench/cart. Currently I live in an apartment so I don't have the room for an actual shop. Whenever I want to work on anything I spend alot of time pulling my stuff out of the storage unit and setting it up. What I'd like to do is build a mobile unit that can store all my tools and double as my work bench. I've included a link to a sketchup model I've just started working on. I'd like to have my table saw (10" Delta Contractors saw), Chop Saw (10" Makita), Band Saw (9" Craftsman), Planer (12.5 Delta Benchtop) and Drill Press (12" Delta Benchtop) all …

      • Like
    • 6 replies
    • 3k views
  24. Hey everyone, well i have been wanting to do this for ages...build "the shop" I have done everything in the garage for th elongest time but it has gotten to the point where i want to actually park in there. Plus after my Thyroid was removed (it acts as the bodies thermostat) it is always to hot or too cold in there to work. So I took over a section of the basement. Thr problem was all the crap in my basement, it amazing the amount of crap in boxes one can collect. So how do we kill 2 bird with one stone...sell all the crap in boxes and buy the tools and supplies your need!!! So armed with craigslist and ebay my goal is to fill the and finsh the shop with out coming out of…

      • Like
    • 18 replies
    • 5.6k views
  25. Started by Frede,

    I built a router table/fence some years back and I'm finally upgrading the 2 1/2" DC. Getting 4" into the cabinet was easy but I'm looking for some ideas on how to mount the 4" on the fence. My fence is great so I don't want to mess with it too much. Any thoughts?

      • Like
    • 4 replies
    • 3.1k views

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.