Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Shop

  1. Started by BigBen,

    One of the scariest area of building the shop has been setting up the electric system. I until have been a complete novice, doing nothing more than changing a ceiling fan or two. But with lots of help from the guys in the Woodwhisiper chat and friend who is a electrian I was to knock most of it out myself. My plan for electrical is 100 amp panel, which is more than enough for a one man shop. I also wanted lots of outlets, so I have oulets every 6'. Currently I have six 220 outlet in places where I am likely to have larger power tools. But I also used only 12 gauge THHN wire in case down the line I want to change where I have them as well as running 2" conduit t…

    • 1 reply
    • 3k views
  2. Started by BigBen,

    I have been building new workshop. My previous shop was about 9' x 10' and was great to begin to learn but quickly started to feel like a prison cell. I dont think I could have stuffed more tools into it. The new shop is 15' x 30' with 10' ceiling, this was maximum I could build within city code. I used sketchup to get a good idea of what I wanted it to look like and good to building. The following are pictures from the build. I will post more as I get the shop set up.

    • 6 replies
    • 4.9k views
  3. Started by pghmyn,

    I only have one bench right now that doubles as an outfeed table to my table saw. It is 24" x 48" and made of one MDF and 2x4's. Works for now. I have been debating in my head what I should have as my full time surface. I am in no way a hand tool enthusiast. Never have, and never will be. I will utilize a few hand tools here and there like a block plane, chisels, dovetail saw, etc. But that is about my extent of that. My main question is, should I make a torsion box type bench or a slab type bench? What are the pros and cons to both? I've never had either.

      • Like
    • 41 replies
    • 10k views
  4. In the idea of keeping things non-permanent and easy to remove without leaving behind much damage, I came up with this design for a lumber rack: Allow me to explain. I am in a basement, and I don't want to drill holes into the cinderblock walls. Just a personal preference that I am sticking with. I wanted to keep a lumber rack off the ground and as vertical as possible. I didn't want all this weight supported just from one concentrated area of a floor joist. Again, a personal preference. The red is the cinderblock wall, the left-most green stud is a 2x12 sitting on the cinderblock wall. The remaining floor joists are 2x10's. On this particular wall, the joist…

    • 16 replies
    • 3.6k views
  5. Started by ..Kev,

    So, here is my "small but useable" shop. I originally built this 1500 sq ft building as a recording studio. That should explain all the glass.. Without going into too much detail, my dedicated audio engineer is going thru the cancer battle. That battle started a little over 2 years ago and we just don't think he'll be back. So, as I'm not going to give up my day job, it was just time to move on in life. I live in a very small town and the studio was simply not going to support the family. The pictures below are the current "shop". It's the 600 sq ft live room of the studio. The rest of the building is a hobby (quilting) room for my wife, a storage room, …

      • Like
    • 18 replies
    • 3.4k views
  6. Started by Wayniackc,

    Does anyone use one of those portable A/C units as basically just a fan that blows really cold air? One of my problems is that it can easily get 100+ degrees in my garage in the summer so that obviously limits the amount of time I spend in there. I don't really want to try and cool the whole garage down, and while a hose that vents outside I can do via the garage door, I don't really want to cut a hole in the house for something like a mini split. So my thought was to get one of those portable units that usually go for a few hundred and use it basically just like a fan that blows cold air. I don't need it to cool the whole garage as long as the area I'm working in is reas…

    • 5 replies
    • 3.3k views
  7. Started by Orbb,

    I spent the weekend trying to clean up the garage/shop. My biggest obstacle is all the offcuts and small pieces, that "I may need some day". How do you draw the line on what to keep and what to discard? Over the past several months, I have leaned towards throwing it all away, or in the firewood pile, then the time comes and I need a 1x3x 3/4 piece of whatever and I find it, completley negating my thinking. Where do you draw the line?

      • Like
    • 20 replies
    • 4.5k views
  8. Started by Spunjin,

    Hey Everybody. I just added 3 8' T5 light fixtures in my garage, an upgrade from a single CFL. Next I have to add a sub-panel for the additional outlets I need to add to run my equipment. I am planning in running just 50A to the sub-panel with a couple 20A circuits and a couple 15A tandem circuits in the box. Should I run more power to the sub-panel or is 50A fine? I don't have any 220 equipment at the moment and I just run a 2HP dust collector while running the TS, Planer, or Router. So the absolute max of 35A would be pulling at one time. Thanks for the help in advance. Regards, -Sean Sent from my iPhone using Tapatalk

      • Like
    • 27 replies
    • 14k views
  9. Over the past couple of weeks I have reworked the dust collection in my shop, which is about 300 sqft. I have an average 1.5 HP DC that happens to have a 6" inlet so I have switched from a small network of 4" flex that was mostly running along the floor to 6" PVC at the ceiling. In order to do this I am hanging the impeller housing upside-down from a support made out of 2x3s. I also reworked the ports on all my machines (that are hooked up to it) to be able to run 6" flex directly to the machine where possible. I am considering this an intermediate step on the path to a cyclone unit which I can't do in this space. Having already reworked the machine ports and gotten …

    • 6 replies
    • 4.9k views
  10. Anyone have any ideas or experience converting a Delta 50-866 type 2 DC to use a cyclone? I am also going to modify it for Wynn filter instead of the bags.... Pics of this can be seen at http://www.toolpartspro.com/delta-parts/delta-50-866-type-2-parts.html I have the change to buy this complete or w/o the stand and build my own - which may work better as I want to do the modifications. I haven't seen anyone who had done a cyclone with this large of a unit. Any suggestions on where I could get a metal cyclone that would work? Thanks...Leland

      • Like
    • 5 replies
    • 3.7k views
  11. Started by jmaichel,

    Here is a tour of my shop. I did really edit the video so it may be a little rough.

      • Like
    • 20 replies
    • 5k views
  12. Started by jmaichel,

    I have to come to the conclusion that I finally need a real dust collector, my shop vac and Dust Right Vortex just isn't getting the job done but I have some limitations. I would like to stay around $500 and it has to run on 110v. My whole garage is wired on a single 20 amp breaker, there is no way around this. I have to be able run a power tool and the D/C at once. I know this limits me to 1 HP and maybe 1 1/2 HP collectors and this maybe be pushing it. Here is what I am looking at: -This Grizzly and adding a Thien separator but I am worried that the separator will reduce the CFM significantly. -I am also thinking about going with the infamous HF extractor, adding a Wy…

      • Like
    • 65 replies
    • 13.2k views
  13. Because my day job is as an energy efficiency consultant for a public utility in the commercial, industrial and agriculture sectors and I have a pretty decent shop, I get asked a lot of questions. Some are about lighting, heating and cooling, and general construction. I also stay up on building science in the residential sector, as that is my other passion besides woodworking. I've been thinking of writing a blog post or several, but would like to know what you would like. Please let me know your questions and I'll answer them to the best of my abilities. I have a lot of contacts in the field, too. So, if I don't know the question, I will track it down or let yo…

      • Like
    • 120 replies
    • 28.3k views
  14. Started by BigBen,

    I am trying to put piece together a cyclone system. I currently have Oneida cyclone body and filter I got from CL. What I need is more motor, impeller and motor housing. My question is would Grizzly G1030 motor and impeller be able to support the system. The 12.5" impeller worries me a little. I plan on running 6” main line about 25’ long. Thank you for your comments in advance. Cyclone Body http://www.oneida-air.com/inventoryD.asp?item_no=SSX060000&CatId={AF788678-CC99-4A98-A11A-D46574885567} Dust Collector http://www.grizzly.com/products/3-HP-Dust-Collector-with-Aluminum-Impeller-Polar-Bear-Series/G1030Z2P

    • 4 replies
    • 3.5k views
  15. Started by Bobby Slack,

    Hello friends. Some time this year I finally started making cabinets for my shop. The concept is modular and mobile. Part of my woodworking is done in Redondo Beach, California and part of it is in Pitkin, Colorado www.pitkincolorado.com So when is time to pack up now I roll my cabinets to the trailer and take off. Also since my workspace in LA is a 2 car garage (in colorado is 1200 sqft) I need to move cabinets around to create space. Eventually I will build a side door so when I need a LOT of space, I roll the cabinets to my side yard without opening the garage and disturbing the neighbors. I use also my Festool benches and there are a few times …

    • 0 replies
    • 2.8k views
  16. Started by lelandschultz,

    I am in the design process of my new shop and was wanting to know if anyone has vented their DC systems outside and if so were there any issues and how they did it. I am interested in the Clearview but am still looking around. Was originally thinking of building an enclosure around the DC system to quiet it up but heard some talk that venting outside makes it much quieter and also more efficient....comments? Thanks, Leland

      • Like
    • 10 replies
    • 7.7k views
  17. Started by ducmons,

    So....new around here, and already need advice. Like the title says, I have a metal shop and I'm in Arizona. Now, before you think I'm an idiot for having a metal garage..., the place I'm at came with a metal building. The building permit was never finalized, and when I tried to get a permit for power, I discovered that was the case and they wouldn't approve it because they say it's now illegal to have it there. That deterred me from scrapping it and building something bigger. So....doing what we would all do....I got my hands dirty and got power to the place. Last year, I scored a used a/c unit and got it plumbed in, but it's not keeping up. I don't have any experie…

    • 12 replies
    • 3k views
  18. Now that I have a planer and jointer I started milling up the wood for the Roubo Workbench. I quickly came to the decision I must do something different for dust collection. I am limited in headroom space in my shop. My ceiling is at 90" and the Clear Vue Cyclones CV1800 is 96" tall. I thought I would turn to the forum for help. I'm interested in a very efficient system (I do not want to upgrade later) that will fit under 90". Do you have any ideas?

      • Like
    • 35 replies
    • 11.2k views
  19. Started by Eric.,

    I don't know about you guys, but I think the bandsaw designers of the world need to have a meeting with the Festool designers to get some tips on DC engineering. As far as I can tell, they're all basically the same...which is, the first DC port is six or eight or more inches away from where the blade meets the wood. Maybe some are better or worse than others, but mine is complete crap. The bottom DC port evacuates everything that collects in the box below the bottom wheel, but the top port picks up almost nothing that comes off at the table. So I added a third port where the first port should have been in the first place. I bought an 8" jointer hood and carefully …

    • 17 replies
    • 8.2k views
  20. Started by Chuck Melton,

    I am getting started with a pretty small shop space and I wanted to get some advice on what I should think of in terms of layout. I am slightly over half of a long one car garage. The max space I can really claim at this point is 17x10. At one end of the space is the garage door, and the in the middle of the 17' wall adjacent to the house is a door leading inside. As of now, the only free standing items I have to worry about are a table saw and a jointer. The tablesaw has a mobile base and can wheel around (I have rather enjoyed using it in the driveway during nice weather). I am planning to put casters on the jointer so that I can likewise wheel it outside, or ar…

      • Like
    • 9 replies
    • 3k views
  21. We recently purchased a house with an unfinished basement. I've been planning to use half of the space as a workshop. I'm trying to bolster my knowledge on enclosed space dust collection, but I think it's pretty clear I don't want a scenario where fine dust can make its way into the furnace intake and into the house. I prefer not to put up anything semi-permanent like frames and dry wall around the furnace because I'd like to keep the use of the space flexible for now. Any other ideas on how to create an air tight barrier around the furnace area? I was considering plastic sheeting and duct tape, but weaving that in between each of the floor joists seems like a pain.

      • Like
    • 19 replies
    • 15.7k views
  22. Started by Dave H,

    This one had me LMAO http://www.bcsportbikes.com/forum/showthread.php/146566-Build-to-Fail-Fail-to-Build.-What-is-this-I-don-t-even

      • Like
    • 20 replies
    • 5.1k views
  23. Started by Nyles,

    Hey guys. Just posted an introduction to myself over in the intro section but wanted to post a few pics of my small basment shop i havnt measured but i think the whole things set up in under a 10x12 space. you can see from the pictures that its a little tight fitting at times but i just make it a point to put tools away that arnt in use and sometimes i just have to accept the fact that something has to be put away then gotten back out again a short time later. i guess my motto is a small shops better than no shop. thats about the jist of it. i have several tools not mounted permanately to the benches that are on bases that i clamp …

    • 17 replies
    • 5.1k views
  24. Started by tmwoodworks1,

    post you favorite wood below mine is purple heart

      • Like
    • 49 replies
    • 9.4k views
  25. I am building out a new shop in the garage of a house we are renting. It will likely be another 1.5 - 2 years before we buy a house where I can have a more permanent shop. Because it's not permanent, I wasn't going to worry about much in the way of actual dust collection, rather rely on a good respirator to keep the stuff out of my lungs. But a recent thread about time wasters in the shop made me realize that there are two ways that a lack of dust collection is seriously limiting my shop time. First, I have to stop working about 20 minutes (at least) early to break out the broom and shop vac and clean everything up. Second (and this is the bigger impact) not h…

    • 2 replies
    • 3k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.