Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Shop

  1. Started by schu777,

    I'm considering moving my shop from the basement to the garage. The shop would become a play room and maybe used for a few other things. Anyway, I went through all the topics in this forum and didn't really see any solutions of how to treat power tools in the garage to prevent rust. I live in Omaha, NE, so the temps are 33/14 for Dec/Jan with 83-87/61-66 in Jun/Jul/Aug. The humidity is all over the place through-out the year - According this site, it ranges from 40% to 92% over the course of the year - Driest time is April and most humid around August. Right now the garage is host to the mini-van and it's nice to be able to get into the van when the temps are…

    • 10 replies
    • 2.9k views
  2. I am trying to upgrade my DC in my shop until I can get a Clear Vue. So I have 6" metal ducting and a 2hp Jet single stage. I was thinking I could improve it with a separate Thien separator. Anyone built one with 6" ports? If so, did you use flex hose and 6" PVC 90s? Advice? Sources? Thanks in advance

  3. Started by blkdiamond,

    We our building a new home, and for the first time ever I am getting some dedicated shop space, very excited! I don't currently own any tools requiring 220, but I am planning on getting a cabinet saw soon, so I asked the builder to install a 220v outlet in the garage. I checked last weekend and they had installed the 220, but the outlet is the same as a dryer outlet. I am assuming that this isn't correct, and that the outlet should look more like a standard 110. Any help is appreciated, even a picture. Thanks.

    • 11 replies
    • 3k views
  4. Started by Shopdog19,

    I recently cut dado's in some shelves and my tablesaw table left black marks on the shelves; how can i prevent this in the future?

    • 3 replies
    • 3k views
  5. Started by splinterking,

    Hi, I'm in the planning stages of building a work bench. I've been using saw horses and a piece of MDF, so this is a big step up. I would like to make it multi-task and also work as an out feed table. I'm looking at basing it off one of two plans from Popular Woodworking, both by Chris Schwarz(the $175 Workbench and the 24 Hour Workbench). Besides a few little things in the joinery they have basically the same yellow pine base, the difference is the top. One has four pieces of baltic birch glued up to make a 3" thick top and the other is a more tradition laminate top made from the yellow pine. I'm just wanting some opinion or pro's and con's on each method. Thanks!

  6. Started by Nowicki20,

    Hello, I am I the market for a cyclone dust collector (grizzly 3hp. Seems to be most bang for the buck). I have some unanswered questions. Can anyone recommend some reliable information (preferably a book). I QUICKLY looked over bill Pentz website. He seems very opinionated. Seems anything under 6" ducting will do nothing but keep the shop looking clean. Maybe he's right? Is his information the "be all end all"? The grizzly has an 8" intake, but most tools have a 4" port. No good? Any info will help, especially a good book recommendation. Thank you

    • 3 replies
    • 3.4k views
  7. Started by sbarton22,

    I'm looking to add some walls to my unfinished basement. A few of the walls will run parallel to the joists, which are TJIs. The top and bottom chords are the plywood type vs a 2x type. So, my question is where should I add the blocking to support the tops of the wall? The web is OSB. So, does it make sense to add blocking above the bottom chord and the top of the parallel wall gets a double top plate and the perpendicular walls get a single top plate? I'm thinking that nailing into the layered bottom chord is a bad idea. Maybe I'm wrong about that? I'm open to any ideas.

      • Like
    • 11 replies
    • 6.2k views
  8. Started by duckkisser,

    here is a carving forum where the members posted their work shops. Its mostly stone and metal carving forum. but i thought it would be inturesting to you guys. This particular posting is a tour of a bunch of carvers work spaces rather then the wood shops that most of us have. most wood shops are basicly the same set up with the same tools with a few realy unique set ups so for the most part when you have seen one you have seen them all. so for a change of pace im throwing carveing shops at you so you can feed off it. i know i always like to see tours of shops and these are unique since for the most part there dedicated to miniture work like jewlery. http://w…

  9. Started by jmaichel,

    My shop is roughly 3/4 of a 1 car garage, so space it tight. I recently added some new tools and now need to reorganize my layout for a efficient work flow. Here are some pictures of my shop in it's current state. The right side of the garage is where I am going to do most of woodworking. That's where I have a bench, bandsaw and wood rack. I am still on the fence on weather or not to keep the bench. I bought it from a guy of CL for $25. The top is crap and pretty much useless. I put a piece of foam insulation on it to calibrate my TS75 and guide rails. If I do keep it I may just throw a solid core door on for the top, add a vise and call it a day. The only problem is that…

    • 12 replies
    • 3.8k views
  10. Started by woodmang,

    Hopefully this is the right section of the forums for this, and hopefully not a repost, I did a quick search and didn't see much. I am looking at purchasing the 3M Half Facepiece Reusable Respirator 7503/37083(AAD) like the one Marc recommends / uses in Episode 87 - Dust In Time. One thing is keeping me from adding to my cart, which is the verbage that I see both on Amazon and something similar on 3M's website: "3M personal protective equipment sold through Amazon's Industrial and Scientific Department is only intended for US occupational workplace use. This 3M personal protective equipment must be used in compliance with the Occupational Safety and Health Adm…

      • Like
    • 25 replies
    • 7.4k views
  11. Started by rubus,

    I am just starting to plan my shop build this summer and was curious as to what dust collector to buy. All my tools will be stationary. Are cyclones the way to go or just go with a 2 or 3hp canister style? I would likely be running 4inch piping to each piece of equipment. Also, I would like to have my tablesaw and outfeed table in the middle of the shop and am curious if people put power outlets within the slab so to not have to trip on cords all the time? Thanks Shane

    • 6 replies
    • 3.7k views
  12. Started by pghmyn,

    My shop is shaped like an "L" which I really like. The long portion is 10' x 20' and the small part of the "L" is about 8' x 10' (roughly). As of right now, that smaller part is going to still be used for storage for my fiance's family. However, I have free reign to use the larger portion! I used Grizzly's shop organizer to put something together quickly about how I want the shop to be set up. Here is what I came up with: You can notice there is no assembly table, yet. But I was thinking that could go behind the table saw. Or, Something up against a wall. The table saw is the G0715P Hybrid saw from Grizzly, and the jointer is the G0656P 8" model from Grizzly as …

      • Like
    • 26 replies
    • 7.1k views
  13. Started by tim0625,

    I live in coastal South Carolina. We often go through the summers with temps from 92 to about 102 along with lots of humidity - often over 90% to go with the heat. I've had an older, large window AC unit sitting in the corner for years. A couple months ago, I installed it in my 450 sq ft shop. It works 'ok'...just ok...probably needs a little freon but I've just gotten my electric bill and it has increased an additional $200. That's too money for just "ok" but it is an older unit that is probably not very efficient.. I have some HVAC guys who are looking for a used package unit but nothing yet has turned up. The shop is brick over block on the walls with the roof/ceiling …

      • Like
    • 22 replies
    • 14.5k views
  14. My table saw has an aftermarket splitter on it. The splitter is a Biesemeyer 78-961. If anyone has this splitter, it's not the mounting hardware that has slop, but the insert has slop once it's clicked in. Does anyone have expierience with this splitter? Should i not be using it?

  15. Started by mkirby,

    Hi guys, I will soon be getting standard fluorescent lighting for my garage and i want to install them so that they are recessed into the ceiling. I would rather do this as i don't have a lot of head room and knowing me i will smash many a tube otherwise. Im thinking of 5ft 58W twin bulb units. Is it possible to do with standard fittings or will i have to get the stupidly expensive recessed fittings? More questions depending on the answer to this one Thanks

  16. Pretty cool video, and they say it can work on metal as a rust preventative. I know a lot of people have problems with surface rust. I'm betting that this would make the surface very slippery as well. I would imagine it is pretty toxic stuff, though. Cleanup is with Xylene. More info on their website: http://www.spillcontainment.com/everdry (No affiliation)

      • Like
    • 11 replies
    • 3.8k views
  17. Started by JusticeBeaver,

    Is a 1 HP dust collector enough to run ducting around a 200 sq ft space? I don't have room to drag the thing around to each tool and moving the hose is a small pain. Need it to connect to a lunchbox planer, jointer, and bandsaw. Occasionally the router table. I'm not completely opposed to a new DC but I've got to stay within 110V. All of your insights are appreciated.

    • 2 replies
    • 3.1k views
  18. Started by dodgeram99,

    Has any one built Marc's assembly table and used it as out feed table/ work bench? If so did you use a vice and bench dogs with it? How well did it with stand up being a work bench? I ask because my shop is to small for both. And I need a dead flat work surface for assembling and a work beck for building. So I thought if I built this it could work for both.

  19. Started by Milo,

    Looking for advice on my garage workshop. I need to figure out a way to confine workshop so that I can have my tools in one area and still leave some room for a washer and dryer and other miscellaneous items. can anyone offer some advice on how to put up some dividers which may cut down on the amount of sawdust and noise goes into that area of the garage. I also have a automatic garage door opener have to deal with that with any partitions I may put up. I was considering breaking the garage down into two sections,one smaller rectangular shape and then a second area a large L-shaped section which would encompass the back of the garage and the side of the garage and I am …

    • 8 replies
    • 3.3k views
  20. I'm maturing from using power handtools on the back porch to setting up a shop in our unfinished basement using large stationary tools, so I'm thinking about dust collection for the first time. Do I need an extractor for both power hand tools (like a 2 1/4" shop vac with a separator) and an extractor for the large stationary tools (like the 3/4 HP Dust Right Wall Mount)? or can I use the 4" Dust Right with a hose reducer with power hand tools? Also, since the air intake for furnace is in the basement am I going to have a issue with ambient dust getting pulled up through the intake and sent in the rest of the house? The furnace filter isn't exactly a HEPA filter. …

  21. Started by Milo,

    Hey gang, I have an old Craftsman model 2288 jointer. It's weighs a ton, and works just fine, but there is one problem I have been trying to repair without success, so I though I would ask here. Shouldn't I be able to raise both infeed and outfeed tables on a jointer to a point they are above the blades, then adjust backwards until I get the cut I want? Fortunatly the outfeed works just fine, so the jointer can be. Used, but I cannot raise the infeed above the blades. 1) I should be able to raise the infeed above the blades, correct? And if is 2) any ideas why mine WON'T and how do I fix it? Can I completely remove the infeed table to see what may be wrong? …

    • 9 replies
    • 3k views
  22. Anyone ever wired up the ClearVue Cyclone with both a remote and with low voltage wall switches all working together? I bought the electric box that you can get that comes with the remote....this is currently working. I have some low voltage switches that were hooked up to my old DC and I would like to get everything working together like a 3-way switch.

  23. Started by Ed O'Halloran,

    Hello All, I live in northeast Ohio and we get pretty cold in the winter, and hot and humid in the summer. Often my shop activities are restricted to spring and fall. My garage is my shop, it is 430 sq ft and attached to my house. I am considering taking the walls down to the studs, adding foam insulation (researching that now) and adding something to provide heat in the winter when I am working, and pulling the humidity out in the late summer months. Cooling would be added bonus. I was just wondering what solutions have worked for people that are in similar situations as me. Ideally I would like to move from here in a couple years and get a place that would ha…

      • Like
    • 15 replies
    • 6.4k views
  24. Started by Bobby Slack,

    We just bought this thing for our house which is the only way we can keep it clean with two dogs http://store.irobot.com/home/index.jsp?002=1443051&004=502220976&camp=MSN+-+K72&002=1443051&004=502220976&005=3223431568&006=402754189&009=b&011=roomba%20for%20shop So I took it to the shop and left floor perfectly clean.

      • Like
    • 6 replies
    • 3.2k views
  25. Started by dimmaz88,

    Hi all, I'd like your expert opinions I have a hobby size table saw which i'd like to expand. I'm planning to build a torsion box that surrounds the saw top. Do you think a torsion box with a cut out will be sufficiently strong, or will it reduce the torsion box properties too much? I was going to use MDF, would ply be a better option or does it not really matter? Any help is greatly appreciated. P.S. If you have a better idea please say so.

    • 8 replies
    • 4.1k views

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.