The Shop
1,954 topics in this forum
-
Hello all. I have recently picked up a model 34-802 Unisaw for a pretty decent price (compared to craigs list and various other sites), and was curious if anybody could help out with sharing some pointers to check the 'true-ness' and to tune up a used table saw. It does run, but have not got a chance to do much of anything with it yet. I upgraded from a portable job site table saw, and this being is my first 'real' table saw, any help would be appreciated. I will say that the cast iron top looks relatively flat, with some minor digs/gouges. Beyond that I have not yet had a chance to get under the hood (sort of speak). Look forward to the advice, thanks. Mike
-
- 3 replies
- 3.9k views
-
-
Hi guys, I had a great weekend because I just got a new(used) table saw for the shop! I upgraded from a little job site portable dewalt table saw to a Rockwell Unisaw Model # 34-466. The only problem is that the fence is beat up and out of square. You guys have suggestions for a new fence that is super sweet but not a wallet killer? Thanks for your suggestions!
-
- 4 replies
- 6.6k views
-
-
So I am setting up my new shop and getting ready to purchase a DC unit and I was thinking how does everyone control their DC. Do you guys just turn it on when you get to the shop and leave it on while working? Do you use a remote? Or does it turn on when you start to use a tool? I am looking at what is best. I was thinking of doing a remote and then thought I probably won't remember to turn it off or on most of the time. So I was thinking of either just turning it on when I get to the shop or having a system that turns on when a tool is on.
-
- 17 replies
- 5.5k views
-
-
Just a thought with the inevitable cold of winter approaching and all of us that work in the shop thru the winter having to deal with the expenses that come along with heating our shops. Gas, wood burning, what ever it is it sucks. I know that as i pallet up my cutoffs through out the summer, I always think theres no way ill get through all that in the winter and usually by the middle of december i have to buy my first truck load of firewood to heat my shop. to my question, do any of you guys press your own bricks out of saw dust. what is the proces (binding agent, formula). do you use comercial presses or have you made your own. I would love to use a burning fuel …
-
- 9 replies
- 8.6k views
-
-
I know most of you are familiar with Festool, and their dust extractors. I'm in the process of saving money for one of them. But for the mean time, does anyone know where I can get a power strip that will turn on an outlet(shop vac) when I turn on my table saw, miter saw, etc? Its basically what the Dust Extractors from Festool has. Any help would be greatly appreciated!
-
- 2 replies
- 4.1k views
-
-
I am setting up a new jointer. The bed and associated parts are coated with grease. The instructions state "this coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline, or lacquer thinner for this purpose)." However, Kerosene is available locally only in 2&1/2 gallon cans, and I have no other use for the kerosene. I was hoping someone might advise me as to another suitable cleaner for this purpose.
-
- 8 replies
- 3.9k views
-
-
Hi everyone. For years I have been looking for a "do it all" solution for wearing earmuffs to protect my hearing but at the same time allows me to stay in touch with the world. Ideally, I would like a headset that can answer my mobile phone, my landline, listen to the radio, music from mobile phone or television (if I get one in the shop later on). It has to have enough range to cover maybe 200-300 feet. It would also be nice to be able to talk into a boom mic that has extranious noise cancelling properties as well. I have seen guys riding motorbikes with half face helmets and a small arm with mic attached that I am told are very effective. Is there such a devise around…
-
- 14 replies
- 7.1k views
-
-
Over the next year or so I'll be in the market (hope to be in the market) for a table saw, jointer, planer, and band saw. I'm fairly well settled on a Sawstop PCS175-TGP252 unless someone can talk me out of it. The jointer, planer, and bandsaw I'm struggling with. So here's the fantasy that I hope to make true over the course of the next year: Assume a $6000 budget (probably). There are no preexisting cabinet or stationary tools. Two 20 amp 230v outlets are available. A moderate selection of basic hand and portable tools are already available (chisels, drills, track saw, sanders, shop vac, clamps, stuff like that). Scope of the work is household furniture, gifts, unnecess…
-
-
- 21 replies
- 10.8k views
-
-
So I'm at one of those points where I have a limited amount of time between projects. The shop was never completely set up after the move and a lot of things are just cobbled together or simply laying on the floor. Its an organizational nightmare that actually affects my mood when I'm working. Yeah, I'm weird like that. So I'm determined to get the shop in order BEFORE starting the next project. With so much to do, I'm pretty sure I am going to just buy some of the storage items I need. Yes its more expensive, but for me time is money. And to be completely honest, I really get no satisfaction out of building a utility cabinet these days. I know I'm not the only one to…
-
-
- 41 replies
- 15.4k views
-
-
hope you guys don't mind looking into my cave. <iframe width="425" height="349" src="http://www.youtube.com/embed/9LuYExSyijQ?hl=en&fs=1" frameborder="0" allowfullscreen></iframe>
-
- 8 replies
- 5.5k views
-
-
We are planning on rearranging our shop so that it is easier for us to work in the shop and help several kids at once. Planning on putting our tools in a square with a open area in the middle that way we have a shorter area to walk around between the tools.. And one of the things I am planning on doing is converting a large square table into a u shape. What kind of issues might come up by having a u shaped table. I'll post pictures tomorrow after I get my camera.
-
- 6 replies
- 4k views
-
-
Do we have a dust collection expert? Ive got some questions about the main run, branches and drops. Its seems that most use the largest possible main run for example 8" then drop to 6" branches then 4" drops. Is there a reason to drop to 6" branches" Would it do any good to leave them at 8"? Thanks Don
-
-
- 29 replies
- 11.6k views
-
-
It would be nice to come up with a standard test we could all use on our systems to see how our dust collection systems are doing. Everyone might think their system is fine, but they might not be. This is an effort to have some kind of standard that everyone could use to see how they are doing and have a goal to work towards. Pondering simple universal tests... Hmmm. Think think think think think - DING! How about, how far from the bench top does the nozzle need to be to start picking up Miter Saw dust. How far from the bench top does the nozzle need to be to start picking up PLANER shavings. How far from the bench top does the nozzle need to be to start pi…
-
- 5 replies
- 3.7k views
-
-
Hello all I live in Western Australia and am retiring soon and want to build a workshop in my new home. My thoughts have turned to workbenches. I can't justify spending thousands of dollars, but want a decent bench on which to work. I don't realistically aspire to producing 'fine furniture' although I hope to 'do what I do' well. My local Bunnings Warehouse doesn't have a huge variety of timber types. I am happy to construct it myself, but I am, as yet, limited in my technical woodworking skills. Kit form is fine, again, if it is affordable. I need to be able to fit good woodworking vises. Can anyone help with suggestions please? Thanks Bill
-
- 3 replies
- 4.3k views
-
-
Does anyone have the link for the correct micron canister for the HFT DC?
-
- 2 replies
- 3.3k views
-
-
When you are done with the compressor do you drain the air tank?
-
- 5 replies
- 4.6k views
-
-
Does anyone know where to find 5" duct? I've pretty much exhausted the Google, and what I've found has been insanely expensive. The reason I ask is I've got my eye on a cyclone separator to add onto my single stage DC...but the inlet on the cyclone is 5". Why? I have no idea. So assuming I can't find any 5", would I be better off reducing to 4" or expanding to 6" off the cyclone for my main line? The DC inlet is 6" and it's a 2HP. Thanks for any help guys.
-
- 3 replies
- 3.8k views
-
-
Hey Guys, I'm starting my dust collection setup in my basement shop this weekend. And I remember watching a woodwhisperer video where Mark sets up his runs in the garage. Can't remember if it was old or new shop. Anyways, I can't for the life of my find it. I've looked at all the video sections and watch pieces of some and just don't see it. Anyone know where it is? Time for a refresher before I go do this stuff. Thanks!
-
- 3 replies
- 3.5k views
-
-
I'm new to woodworking and I have an older Grizzly 2HP table saw with a Freud thin kerf blade on it. It bogs down easily even with softwood. Today I was trying to rip a 3/4" think douglas fir at a 45° to make pieces for my French cleat tool organizing system. I get about 12"-14" down the rip and the blade comes to a stop. I'm taking the cut very slow. It's has a new Delta fence on it. I've measured the distance from the front of the blade to the fence and the back of the blade to the fence and it seems pretty dead on accurate (same tooth measurement). Any help would be appreciated. Thanks!
-
-
- 18 replies
- 11.2k views
-
-
I have a small plastic container that I throw left over screws into. Eventually the container becomes useless because the effort of hunting for a screw that is right for the job at hand outweighs the need. To this end, I decided to sort the screws that lay in wait of the garbage bin. I decided to tip them all out on my coffee table in the lounge room. One of the inherant problems of being in the lounge room is that a glass or 2 of bourbon usually ensues. I think I was lucky to get this far. Maybe I need some dedicated screw storage? All good fun. And maybe I will find a use for some of them?
-
-
- 18 replies
- 5.9k views
-
-
Ok so we each come across problems in the shop that we need creative solutions too. for instance we have lots of drill bits in the shop and i could drop 100 dollars for a wall mounted drill bit dispenser that stays in one place. but i wanted something that i could carry around lots of one kind of drill bit that was contained and secure. that way i can know what im passing out to 5-6 kids at once. and i don't have to worry about the kids sneaking one out because they are not easy to slip open and pocket a drill bit takes a little bit of work. here are some pictures of the containers i was talking about. http://woodtalkonlin...__fromsearch__1 what i want to know i…
-
- 5 replies
- 4.6k views
-
-
Does anyone have one of these machines. I'd like to hear the good, bad and ugly. Ive spoke to Sam Blasco but would love to get some more opinions. Thank you Don
-
- 0 replies
- 3.9k views
-
-
Had a few hours to kill in between mowing the lawn and other weekend duties so I relocated my inertia reel compressed air line from my site trailer to the garage ceiling. There is far less call for me to have compressed air on site now that most of my nail guns are either gas or battery so, I thought it may be handier to have the compressor etc. in the workshop. It sure is handy having it in easy reach and always available. I have attached a couple of pics for anyone to draw motivation from.
-
-
- 12 replies
- 5.5k views
-
-
So over the weekend I made the drive from St. Louis down to Springfield, MO to pick up a few machines I purchased from Grizzly. While I was down there I stayed with some buddies and did some fishing. Of course after a two month drought, the sky decided to open up and pour down rain for the entire weekend, and of course my trailer and my new machines were out in the weather the whole time. I brought down every tarp I had and covered them as best I could, and fortunately everything stayed nice and dry. I made the drive back home yesterday and went about unloading today. All of the machines were manageable to unload by myself without any assistance...except the plane…
-
- 20 replies
- 27.8k views
-
-
Hi guys, I'm in the market for a dust collector and I'm comparing between two that I've selected. So here is my setup: basement shop, about the size of 1 car garage. Planer Jointer Bandsaw MIter Saw Table Saw Scroll Saw Benchtop router table I now have a 14 month old in the house and it's time to start doing some real dust collection. RIght now I'm using the shop-vac and manually moving it to each tool. Not ideal at all. So here is the two that I'm looking at: Craftex CYCLONE DUST COLLECTOR 2 STAGE 1HP http://www.busybeetools.com/products/CYCLONE-DUST-COLLECTOR-2-STAGE-1HP.html Craftex 2 HP Dust Collector with Canister Filter http://www…
-
- 14 replies
- 7.7k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·