The Shop
1,954 topics in this forum
-
Hello all, Just recently bought a new miter saw and have decided to make a little miter saw station and looking at getting a Kreg Top Trak and flip stop etc. I've been looking at some of the photos of people shops and trying to see what they use when making such things. It seems like some kind of high grade plywood is the choice.. maybe it's HDO? Or just cabinet-grade plywood? Most of the pictures are close up enough to tell. I was thinking of just using MDF. it's usually pretty flat and smooth. I guess I could even glue down some melamine on top to make it slicker. Any thoughts on this topic? Also, if you recommend something that I'm not likely to find a…
-
- 6 replies
- 9.8k views
-
-
Hey folks, I finally got around to making a video tour of my shop. Check it out if you like, and I hope that you enjoy it! Thanks, Brett
-
-
- 5 replies
- 4.8k views
-
-
I have a small shop with nothing better than a Shop Vac for dust collection. I have a respirator mask and was wondering how often I should be wearing it? I know that anytime I am spraying an oil based finish I should wear it. Should I also wear it when I am sanding and other high dust type activities? What is the risk and how much should I worry about it? Wayne
-
- 9 replies
- 4.7k views
-
-
I was wondering what people do that work from a single car garage for dust collection. I am planning a newer workshop and have a table saw, bandsaw and miter station. Do you think i should just hook up to my shop vac everytime I use individual machines, or would it be more beneficial to invest in some hoses and run them to each machine from the shop vac. I won't have to move anything when I'm done working, so I don't have to worry about that.
-
- 8 replies
- 4.7k views
-
-
I'm trying to decide on what to use in my shop for walls and ceiling: OSB or Sheetrock. I haven't priced out either but I'm guessing they will be similar in cost. My thought on using the OSB was that it would be more durable, less likely to get banged up and the fact that you can hang anything anywhere without worrying about anchors or finding a stud. I'm sure I'm missing something so that's why I'm posting. Are there any downsides to using OSB instead of sheetrock? Thanks, Darby
-
- 30 replies
- 29.6k views
-
-
I have just purchased a 5 metre x 35mm Bosch "air sweep" hose for my shop vac and from all accounts, the similarities of this vac hose and the Festool non anti static hose are amazing. Half the price but I wonder how long it will last for? I am guessing just about the same amount of time as a festool vac hose would. Anyway it looks great on the home made boom arm on the roll around shop vac cabinet. And of course, I used Marc's link to go to Amazon to buy it.
-
- 0 replies
- 4.5k views
-
-
this is my own work area kids arent allowed back here. as you can see i have several projects in the works all on the shelf. i know its still ruff but we got all the basic machines and tools and working on upgrading it with better stuff as well as geting it better organazed but it takes time. let me know what you think including what you would do with this much space. 3000 square feet that i have to figure out how to organize, clean, monitor, as well as build in.
-
- 2 replies
- 3.5k views
-
-
What's everyone's solution for heating your shop? Since fall seems to be starting to set in, I realized that I'm going to need to get something if I want to do woodworking in the winter. My current thinking is a shop heater that probably runs on propane (I'm thinking that the gas line is too far to run to the garage). I've got a 2-car garage which is insulated on 1 wall, so I'll be putting in some insulation where I can on the other three. Really just want to get it warm enough so that it's workable, not trying to make it warm in there. Anyway, anyone have a shop heater they really like?
-
-
- 84 replies
- 28.1k views
-
-
I have a 3/4 MDF cabinet under my drill press that holds a scrap bin and and a backup router table. Thinking of rebuilding it into a dust collector. The plan: Two 3.5 amp attic fans, 1300 cfm and $50 each: http://www.amazon.com/Ventamatic-CX1500-Power-Gable-Ventilator/dp/B000LNII4Q Filters, 3 stages, all 20x25: One washable first stage, $70: http://www.amazon.com/20x25x1-Boair-Air-Conditioner-Filter/dp/B001EUGNWY One cheap disposable second stage, $7.50 each: http://www.amazon.com/gp/product/B000P7BJXU One expensive third stage, that should be MERV 14 (0.3 micron) for $20 each: http://www.amazon.com/gp/product/B002WC83EO That comes under $200 for parts, pl…
-
- 26 replies
- 31.2k views
-
-
Hey guys I want to brighten up my shop. I have 6 double 4' T12 fixtures with 8-10 year old 40 watt and 25 watt bulbs, The lumen rating is not printed on them. Regardless of the wattage difference, they appear to be equally bright. I took the advice of a Lowes employee and bought some 40 watt "day light" bulbs with 2100 lumens and 6500 color temperature, He said they were the brightest T12 they had, But after comparing them, they seem to be even less bright than my original ones and a little too much blue in color for my liking.. So now I'm looking for the brightest 4' T12 40 watt bulbs. I was considering these with 3300 lumens with 3000 color temperature from Hom…
-
- 8 replies
- 25k views
-
-
And all I had was a Harbor Freight tool cabinet (which I'd highly recommend). Sooo...I had to make one. Actually, I started this cabinet 4 years ago and had the parts still lying around. They even got moved from the last house, into storage and on to the new place. I also wanted to practice with the PC 4212 dovetail jig and liked the way they came out.
-
- 3 replies
- 4.5k views
-
-
I have played around with making my own little version of a track saw and have been pleased with the results. Again, I chose to recycle rather than buy new. To this end I decided to go with my little cordless DeWalt panel saw. I created a dust shroud and base plate using some ply that was lying around the shop and a couple of 40mm plumbing fittings. I think I have loaded the pics, will know in a minute. I have also saved a quick ustream of the setup in action. The recording is a little overexposed, but hey, you will get the idea of how it works. Also, you will have to put up with a 30 second commercial near the beginning. http://www.ustream.t...corded/16672040 and htt…
-
- 15 replies
- 7.1k views
-
-
I'm a retired vet at 27 and since I have been retired, I have needed something to occupy the time and woodworking drew me in. Now I am at a time when I could start working on projects and possibly sell them to family members and to a very small community. My only hitch in the whole project is not knowing the required tools of the trade that I need to start making furniture, benches, and possibly some cabnitry. Any help knowing what tools I may need to tackle these projects would be greatly appreciated. Thanks
-
- 12 replies
- 5.1k views
-
-
I was helping my wife empty polystyrene beads out of an old beanbag that the dogs have slept on for the past few years. The intention was to fill some old couch cushion covers with the beads to make a new bed for the dogs, all was well until we had a spillage. I remembered that when I purchased a heap of GMC cordless tools when the company went bust that I had also grabbed an electric yard blower vac. It had been sitting in the back of a shed for years. I put it to work with the beads and it made short work of it. It was then that the thought struck me that maybe I could use this thing in conjunction with a home made cyclone and dedicate it to one machine such as my DeW…
-
- 4 replies
- 3.8k views
-
-
Marc's video on the lumber rack was just the kick in the rear I needed to finally solve one of my storage problems. So I spent the weekend constructing one for myself. The plywood cart is pretty much the same with the exception of an extra caster on the hinge side. And the vertical storage is not as extensive as marc's, but it is what fits my space.
-
- 8 replies
- 11k views
-
-
Sometime within what I think was the last year, there was a shop tip in one of the major woodworking magazines for a device that could be made to attach different tools like a grinder to the workbench. It used something similar to a French cleat to lock the bench. When I saw the article I told myself that I'd build one someday. Now that I'm ready to build it, I can't find the article again. I've looked through all my old magazines and have tried to Google - apparently I'm not using the right search terms, since I can't seem to find anything similar. Does anyone remember seeing this? If so I'd appreciate our help in finding it again.
-
- 7 replies
- 5.5k views
-
-
ok im trying to find something that i can use as a fatigue mat that is durrable and washable. i want to get something that is cheap and plentiful. i need this to use in my class rooms shop class. the class room is 3000 square feet and we have several assembly stations and machines so i want to be able to place a mat around our 2 assembly tables 8 feet by 8 feet. along the counter top where our small machines like sanders and miter saws. need to be able to get this prity cheap and plentiful. so if you have any ideas that are outside the box let me know.
-
- 18 replies
- 9.5k views
-
-
As the title states, should I use 4'' or 6'' PVC to run my DC in my new shop. If I use the 6'' I will have it split to 4'' and 2.5'' for my Router table and bandsaw.The runs will be around 10'-14 with 2 45 degree elbows and plan to close all blast gates while each machine is used. Also on another note has anyone had luck hanging PVC on drop ceiling?? Thanks!
-
- 24 replies
- 18.3k views
-
-
I wanted a festool MFT but they were just too rich for me to jump at. Click the link to see what we are paying in Australia http://www.festool.com.au/mediandoweb/index.cfm?sLanguage=AUS-English&ID_O_TREE_GROUP=1625&PARENT=1662&AKTIVPROD=1 granted, the accessories are included in that price, but hey, that's a lot of money to find. I looked at all sorts of alternatives, checked what other forum members were using and after a couple of weeks came up with a design that would give me a fabrication table that had some mft compatibilities. I spent close to $100 for the materials. I will just throw up some pics and you can tell me what you think if you want to .htt…
-
- 8 replies
- 5.2k views
-
-
Is there a thread already started somewhere about Marc's current dust collection setup? I was just curious what the current configuration is.
-
- 17 replies
- 6.1k views
-
-
My shop recently burned to the ground and Im now looking to make a bandsaw decision. Being anal I'd like to stick with all Powermatic. The newer 18" sure looks like a nice saw with some updated features. The 24 seems to be a bit dated and im stuck with single phase. So I guess my question is, size aside is there any reason to get the 3hp 24" over the 5hp 18". Im sure Ill never need to resaw anything 24 wide. I think the turning blocks are my only real need for any real size. Thank you Don
-
- 3 replies
- 3.9k views
-
-
Festool dust extractor, will I or won't I? How many of us have asked that question? I recently went to a retailer who sells festool and other brands and the pair of us walked around the different extractors in his store and read all the details about how many watts the on-board power point could handle. We were amazed to see anything from 900 to around 1400 watts. The guy who owned the store has come from an electrical engineering background and was as curious about the different manufacturers claims as I was. I don't know how much you guys know about electricity, but put simply, amps = watts divided by volts, watts = amps times volts and to help a bit more, 1 horse = a…
-
- 8 replies
- 5.9k views
-
-
I love a challenge, especially when it's cheap. As I can't afford a table saw at the moment, I have been looking at alternatives. Track saws were appealing but my problem was that I could get a fair to good table saw for the same dollars and I don't want to doubleup. To this end I made track, well more like a guide, that is eight feet long and another that is four feet. Then the search was on for a circular saw that would give me a descent cut and little dust, something I could attach my vac to. I tried my 9 3/4" circular saw as it has a dust port but this was wY to cumbersom for sheet goods. I scoured the Internet and liked the look of the hitachi five inch circular sa…
-
- 3 replies
- 9k views
-
-
A strange thing to ask, but does anyone know the 27 mm and 36 mm festool anti-static hoses fittings internal diameters. I ask because I am about to build a service cart for my shop. The cart will have my new vac as well as a triton dust bucket living side by side in the base. I am going to make a boom arm out of 50mm PVC pipe and with a festool 5 metre hose. Also, is there any advantage of using the 36mm hose instead of the 27mm hose considering the triton dust bucket has I think a 32 mm inlet. The top of the cart will be an area that the tool being used can live on. Also might have a drawer slung under the top for the vac's accessories. Wish me luck!
-
- 8 replies
- 7.5k views
-
-
I have been pondering a mitre saw station. I have seen some really nice plans out there and I was also keen for storage that will last, also the thought of being able to wheel the unit around the shop is attractive. I stumbled across this metal toolbox with ball bearing drawers. 6 feet wide x 3 feet tall x just under 2 feet deep. Have a look at how many drawers! Timber top that could be reused somewhere else while I build my own top for it. The middle cupboard could house a shop vac with the suction hose hooked up to a big mouth originally designed for a lathe set up behind. The price of these things is $700. Make a base that will cost about 2/3rds the price for material…
-
-
- 23 replies
- 8.5k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·