The Wood
Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.
1,451 topics in this forum
-
Hello, I recently made a cutting board using osage orange and now find that when I wipe down the board with a damp rag, there is a yellow residue left behind on the rage. It looks very similar to the sawdust, but when it is dry and I wipe it with a dry cloth, there's nothing. I know the Osage Orange sawdust can be used as a dye, so is the wood saturated with an oil that is coming out when it gets wet on the surface? Or is it really tiny particles of sawdust/wood that are coming off?
-
-
- 3 replies
- 10.8k views
-
-
I removed some faux beams from my living room ceiling on Saturday. They were painted a dark chocolate brown. Before taking them to the dump I thought I'd run one through the planer to see what it was. This is what came out: straight grained cedar. Pretty soft stuff but I have a lot of it. I think I'll keep it. Not sure what I can make from such soft stuff but perhaps someone here has some ideas. Sent from my iPhone using Tapatalk
-
-
- 21 replies
- 5k views
-
-
I bought some cherry, maple and butternut from an old timer in central Vermont. He had logs sawn at his house and then stacked and stickered it in various out buildings. This summer he advertised it for sale @ $0.75 a board foot. The cherry and butternut were mostly 4/4 and not select grade. The maple was 6/4 boards 11 or 12 inches wide which went for $2.00 BF. Some of the wood had worm holes, too. So I left with some nice looking boards. That was in early June and I have stored them in my garage workshop since, except for two weeks in July when I stacked and stickered them in the van while we went on vacation. I haven't seen any sign of beetle larvae and I was hoping…
-
- 3 replies
- 2.6k views
-
-
My local hardwood dealer (TH&H for those living in San Diego), has been selling steamed Cherry as well as the usual stuff. I was told that it accelerates the aging process. I don't particularly care for it. Does not look natural to me. I noted the pallet they got has never been sold out but they have gone through several pallets of the natural stuff since they started carrying steamed. Does not seem to sell well. Have any of you tried steamed cherry and what did you think of it?
-
-
- 10 replies
- 4.2k views
-
-
This is believed to be a Swiss-made mid century piece--solid walnut. Greetings from a newbie. I've had very limited experience refinishing/repairing wood. I was about to start the sanding/refinishing process, when I discovered that three of the dowel holes would no longer support the sliding front frame (see pictures). The frame drops below (and through the bottom of) the holes. Prior to my stripping the piece, the frame was loose, but I could get it to stay with a little work; now, however, it does not. I've attached pictures of the holes and dowels. The piece extends out to 8 feet. There are solid walnut slats (not pictured) that straddle the extensions, and i…
-
- 13 replies
- 4.4k views
-
-
I have been thinking of doing a wood turning and not cutting the wood so the pith has been removed from the block. Then allowing the wood to dry and crack in order to have the crack filled with inlay like this. http://www.woodturnersresource.com/featured%20artist/martinlittleton_903/mesqturq6x65.jpg Just wondering if there is a way to prevent, direct the cracks and generally how lo control and prevent them from breaking the form. How long does it take to cause the wood to crack. M
-
-
- 16 replies
- 4k views
-
-
Hi - I'm a fairly new woodworker. A project I want to take on is making a square game table (~3' on a side) for the family to play board games on. It will be a fairly simple affair - square, tapered legs. Hopefully a leather center section that I'll be exploring in a different post. I want it to me modern-ish looking. I'd think I'd want a relatively hard wood given the table use. My wife was interested in something that would come out dark (say, dark gray would be nice). I suppose dark browns (say, mocha) would be okay too. I was thinking of going with (black?) walnut, based on some images I've seen posted on the web, but now I'm not so sure. I l…
-
-
- 19 replies
- 2.9k views
-
-
Not sure what I am going to do with it yet, because it's very small, but I will figure something out... Book matched spalted apple
-
-
- 28 replies
- 6.1k views
-
-
Those of you not familiar, it's a miserable invasive tree here in the midwest. Ugly, gnarled beasts that drop an annual mess of squishy, purple berries all over the place. We just had one taken down on our property. The folks who did the deed merely chopped things into 4'-6' lengths and left them near the back fence. I took those down to fireplace length and stacked them but, just out of sheer curiosity, decided to split one of the widest (ca 8") pieces to see if I could make a few boards. With the help of a sled, I got some straight cuts and have a promising harvest of what look to be tool handles in the making. The heartwood has a mild, pinkish straw color with…
-
-
- 9 replies
- 5.8k views
- 1 follower
-
-
Don't you just hate it when you cut into some thick stock to find it has a crack inside? I've just been milling some 12/4 white oak for a project I'm doing. I thicknessed a few pieces on the planer to around 3" no problem. Jointed their faces no problem. Cut them all to width of 4" strong no problem .... until I got to the last piece. Oh crap it had a split inside that couldn't be seen anywhere else. Dried too quickly or taken from too close to the core of the tree (the annular rings on that piece look around 14" diameter)? - probably - on both counts. It doesn't have any knots or flaws in it (at least from the outsides!) So I thought I would just rip some more of…
-
- 6 replies
- 2.9k views
-
-
I went to buy some oak from a new supplier today. I love this guy, he and I have a lot in common. Similar taste in beer and booze, and Harley's and wood! How could I not ? Any how, I bought about 50 board feet of oak for a dresser I'm about to begin! And he started throwing chunks of wood in my truck, that he said was in his way and he couldn't either sell or use! He tossed in a 12 ft x 7" board of curly maple, saying He has to keep moving this piece out of his way every time he needs to get something. Did I complain? Not by a long shot! Then he tossed in 4 pieces of 4x6 x48" that he said were fiddleback, but he wasn't sure what species the wood was. I'm going to …
-
-
- 22 replies
- 5.7k views
- 1 follower
-
-
This wood came off a pallet. I like the streaks through it but am interested to find out what kind of wood it is. Any ideas?
-
-
- 14 replies
- 3.1k views
- 1 follower
-
-
I am in the early planning stages for a large dining room table. Would like advice on what types of wood people have used for tables like this. Thanks.
-
-
- 15 replies
- 3.6k views
-
-
A family member cut this down. I overheard him talking about putting it on the curb so I asked him to send me photos and dimensions. I suspect its mesquite but I'm not positive as I'm unfamiliar with it. Its 14' long and 41" diameter at the base.
-
-
- 24 replies
- 5.4k views
-
-
I've made my wife a jewelry box with this and want to polish it up just a little. NOT glossy. Between a satin and semi shine to it. Thx for any feedback.
-
- 1 reply
- 2.5k views
-
-
Ok so I saw an ad on Gumtree '1 ton free Cherry Firewood' and thought - OK, I have an open fire that likes wood, it's 12 miles from me, I'll go for it. The result: Now the big lump (trunk) is still to be collected when I find somebody with a trailer that can handle the weight, but it seems a shame to just turn it into firewood. My thoughts were that it would be of interest to someone that is into turning. Possibly the same with some of the thicker (6" dia) branches. In order to keep these in the best possible condition until I find somebody that wants them what should I do. I'm thinking just seal the ends and keep them under some sort of cover?
-
-
- 14 replies
- 3k views
-
-
I recently came by some wooden bed ends by the side of the road. Having cleaned the paint of the solid pieces I discovered some nice pieces of cherry. There were also some panels of plywood which had also been painted. This plywood is less than 2mm thick. What's the best way to clean the paint off?* Will chemicals damage the glue between the veneers? Will a heat gun damage the glue and possibly the outer veneer? Or am I completely wasting my time and just use it for scraps and templates for things? * I'm assuming it was painted at the same time as the rest of the body parts, in which case it's lead free paint.
-
-
- 5 replies
- 2.9k views
-
-
I want to do a simple banding inlay on a table top ( about 1/8 inch wide) and want it to be as black as possible. Ebony is my first choice but the cost is a detractor. Ebonizing mahogany won't work because the color change is very superficial. Wenge is a great color but I think it would be too difficult to cut it into such thin banding strips. Anyone have any suggestions? Thanks.
-
- 3 replies
- 2.5k views
-
-
I needed to make a couple gifts! I had this fiddleback maple, and thought I'd give it a shot! Two of the mallets are staying in the shop, the other two are gifts, as is the cutting board.
-
- 3 replies
- 2.5k views
-
-
I feel that we as woodworkers can, and should spread all possible information about wood. We mostly use endangered wood spices, in a responsible way,by reusing it, for fine woodworking. Share information on witch wood types to avoid using. One of the info sites are. www.wood-database.com/wood-articles/restricted-and-endangered-wood-species/ Examples of Woods from Endangered Tropical Rainforests.pdf
-
-
- 8 replies
- 3.4k views
-
-
Bought a house, inherited a wonderful carved fireplace/mantel. But my wife thinks it's hideous. Question 1: anyone have any idea how much I might be able to sell it for? Question 2: what kind of wood is it? If it helps, I live in San Antonio, where there is a fairly strong German influence.
-
-
my neighbor had a large branch of maple break during a recent storm. the largest part of course was split. but from there i have a 2 foot 8 inch diameter chunk and many other pieces ranging from 2- 4 inch ish by anywhere form 2 foot to 10 foot sections. I have no idea what i would do with any at this point. my real question is how to preserve it/store it. maybe for future small turnings etc. any ideas? thanks Don
-
-
- 5 replies
- 2.8k views
-
-
Hello! I've been trying to find an answer to this all day... I have some dewaxed shellac that dripped/ran into some joints, and I was wondering if it will really cause problems... I am building a baltic birch vertical cabinet, and the corners are Dado/Rabbet joints, with a couple shelves in the middle that are simply dado's. (Sorry newbie terminology) Shellac is dewaxed flakes mixed to a #1 cut with 2 coats. Should I worry about it, or do I start sanding and scraping it out? Thanks!
-
-
- 20 replies
- 6.4k views
-
-
Deciding that wood working is far too hard I decided to try wood growing. After sitting in my fridge at 5 degrees for the last 2 months i have my 1st seedling of Chinese mahogany. If this grows it will become the centre piece of my vegetable garden. The new growth is edible and the red shoots are used in cooking and taste like onions. And if it gets too big i can always chop it down and mill it
-
- 2 replies
- 4.1k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·