Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Wood

Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.

  1. Started by Tom King,

    I repaired some sash made in mid to late 1700s that were made from a wood that I don't quite recognize. It looks very similar to what is called Heart Pine here-from the Long Leaf pine tree, but it has much more soft grain relative to the hard grain-maybe 4or5 to 1. It's much softer than our Heart Pine, and works almost like White Pine but is some bit harder. Color of the soft grain is more brown, and hard grain is not as dark as our Heart Pine. I was thinking there is a good possibility that the sash were imported, and maybe from England. I searched online, but no luck with any info. I was wondering if you had come across anything like this over there, or maybe kn…

    • 7 replies
    • 2.6k views
  2. Started by lawdawg2508,

    Hi guys, I have been trying to get some great dye I have to penetrate several 1/8" strips of red oak. I need the dye to literally penetrate all the way through so when I laminate the strips of different color dyed wood together I can get the "Dymond Wood" effect when I cut into them and sand. I have put at least 20 coats of dye on today yet once it dried fairly well and I cut into one, the dye didn't even make it 1/32" into the lamination. Any ideas on how to get this to change or what I am doing wrong? I did sand the wood so it was ready to soak it up, and this was bare wood, nothing ever applied to it. Is there better hardwood to use for dye penetration? Any info wo…

  3. Started by Andrew Pritchard,

    Tomorrow (or Friday maybe) I'm going to pick up some rough sawn reclaimed red oak. Below are pictures from the ad from the online auction site I'm getting them from. According to the ad the stack consists of: 18 pieces 3" X 5.5" X 40" 25 pieces 1.5" X 3.5" X 28" My reckoning is that's about 100 bf (please do correct me if I'm wrong. I'm still trying to get the hang of calculating that). So the question is - what do with it? I'd like to make a small side table/coffee table for my living room - probably 20"(w) x 20"(d) x 24"(h) or something like that. (Still very much in design stages) Probably with a small draw under it for putting TV remote controls etc in. I'd …

  4. Started by Andrew Pritchard,

    So I bought a big pile of what I was told was red oak (as discussed here ). For the most part it is. I was milling some of it up, and found this piece: Any idea what it is? I'm pretty sure it's not oak because the grain is totally different different.

      • Like
    • 12 replies
    • 3k views
  5. Started by Llama,

    The first time I saw a piece of roasted maple it was on an Ernie Ball bass. It was fantastic! On a whim, I grabbed a piece of flame maple and propped it over my fire pit. The result was very encouraging. The figure darkened almost immediately, and the rest of the piece darkened nicely as well. I'll post a picture tomorrow, but I wanted to see if any of you have tried something similar

      • Like
    • 24 replies
    • 5.7k views
  6. Started by RPCV_Woodworker,

    Hi Everyone, I manage a small (80 acre) forestry project, and i'm interested in culturing some of my trees to grow more figured woods. To that end, does anyone know what the grows conditions/stresses that cause the "curly" figure are? Actually, if you know any conditions that provoke interesting grain, let me know

      • Like
    • 10 replies
    • 4.9k views
  7. Started by WolfmoonCT,

    I'm kind of a beginner, because I do it as a hobby really, and I don't really get to do it as much as I'd like to. I live in CT, and my biggest issue, nearly every time is doing glue ups. I use them for scroll saw projects. I use mainly 3/8" thick and 1/4" thick for the projects. I buy rough lumber, joint a face and edge. I then resaw it on the bandsaw to 1/2" usually. I then glue it. The problem I'm having is nearly all the panels I glue, (most are about 9x8) cup on me. The shop is my garage which is under the bedrooms. I dont' have it air conditioned or anything like that. I usually work in maple, red oak, white oak, ash, and cherry. The ash, and oak us…

      • Like
    • 14 replies
    • 3.1k views
  8. Hi guys, I have some yew I got for a very good price a few months ago, but they are very narrow waney edge boards. I would like to make some cheese boards and finish them in a natural product. (beeswax and an oil?) But having had a look on the internet it seems yew may not be appropriate as its said to be poisonous? They're beautiful colours and shapes, it would be a shame to waste them or take the waney edges off. Thanks! Nadia

      • Like
    • 16 replies
    • 8k views
  9. Started by RPCV_Woodworker,

    Hi Everyone, I'm a woodworker in Western PA, and was wondering if anyone on the forums had worked with any of the "lesser species" of hardwoods, like Staghorn Sumac (Rhus typhina) and American Hornbeam (Carpinus caroliniana). I manage an 80 acre sustainable woodlot, and was looking to make use of some of the under-story trees in succession.

  10. I bought some hardwood today for my first non shop furniture project and I wanted to get an idea of how the pricing for my local hardwood dealer stacks up. 8/4 rock maple was 6.61/bf 8/4 purpleheart was 10.16 it doesn't seem outrageous but I also don't really know the market.

  11. Hi all, just found out that I need to have the front porch of my house finished (railings, steps, etc) in order to re-finance at a great rate that we have locked in until 8/6.. We built the house new a couple years ago and this was one of the aspects that got put on the back burner as a priority to complete . The house itself is the traditional cedar lap siding stained kind of a clear / brownish tint. The supports on the porch that support the roof are pressure treated 6x6 and the decking is unfinished cedar deck boards 5/4.. My plan was to do all of the finishing in cherry; wrapping the posts, railings, bolsters, etc. Everything would be finished either in…

      • Like
    • 12 replies
    • 8.5k views
  12. Started by Daniel Kuehl,

    I've got a friend that offered me a free log he's trimming off of a walnut tree this weekend. He say's it's about 20 feet long and 12" to 15" Dia. I've always just gone to the lumberyard to pick up my material, and I've never taken a log to a sawmill before. Anybody have any advice on this process? I don't even really know how long it would take or how much lumber is in the log.

      • Like
    • 13 replies
    • 4.1k views
  13. Started by lildesertwoodshop,

    Hi all, I have been approached to Build a Live Edge Black walnut Hall Table Top (60" x 25" x 2" thick ish) with a metal stand / legs still in the design stage. So I know 0 about Slabs as I have never been involved with ones use in a project. I would welcome any insight to working on this prior to me diving into the pool blind. I have found a Vendor that deals in these so I guess my fist needed information is what I need to ask them for my purchase. Then after it arrives where to go from there. Ill start with that . Thanx all your knowledge and advise is much appreciated!! LILDWS

  14. Started by MCruz,

    Hey there, new to woodworking. I want to make my wife a bookcase style rack for her heavy cast iron pots. there are 5 of them and all together weigh close to or just over 100 lbs. the heaviest pot is 21 lbs. My question is, how can I determine how thick the shelves need to be? or how many supports are necessary? I'm considered using either Oak or Walnut but have no idea how to go about testing this out without wasting a bunch of wood. How do people figure this out?

    • 4 replies
    • 2.3k views
  15. Started by Tom King,

    I've bought Heart Pine from different suppliers over the years, and always had to use some pieces that didn't meet my ideal specifications. I tried a new, to me, supplier this time. Not only did I get exactly what I wanted, but probably more than double the amount for no extra charge. This is all very fine grain, straight grained, mostly quarter sawn Heart Pine for making 36 window sash. It looks like a lot more, once we got it unloaded in the house, and sorted out for the four different sizes we need than it looks like on the back of the truck. I've never been more pleased with a load of lumber. I bought this as 202 bf. on the invoice. 200 board feet would…

    • 5 replies
    • 2.8k views
  16. Started by woodbloke,

    Been out to get a little bit more timber today, firstly four prime boards of... ...air dried English Walnut, 30mm thick. Then there's a bit more... ...English Walnut, 75mm thick with a couple of even better figured blanks of Turkish Walnut. Next up is a couple of really nice boards of 50mm thick English Elm... ...which was in fact a 9.5' board cut in half. Then there's a monster sized board of CofL for drawer bottoms... ...cut into three bits and talking of three bits of wood, the next pic is of... ...three boards of air dried oak, 30mm thick, which was this morning one board. It was sawn down the middle...twice and each of the boards measures…

  17. Started by duckkisser,

    most woods are a brown color but a few have a unique color like purple heart is purple and paduik is bright red. im looking for woods that there colors really stand out because I want to use the sawdust for inlay. so if you have worked with a particularly brilliant wood let me know what it is called so I can see if I can get some of the wood for dust inlay.

    • 25 replies
    • 9.2k views
  18. Started by mlehikoinen,

    Anyone ever have to order specialty edge banding? I have a table that I need to build half of a top for which has inlaid thin holly or maple strips. The client is looking for an economical solution, so I'm building the top from Mahogany plywood and would like to be able to edge band it appropriately to match the other half of the table. There was a place a few years ago in the states that I had found, but haven't been able to find it since. I would really rather not have to build the edge banding manually if I can help it. Anyone know of a place that sells this type of specialty edge banding?

      • Like
    • 5 replies
    • 2.8k views
  19. Started by Tom King,

    Custom bits I've had on order from Whiteside finally came yesterday. Today, we ran some boxwood to be used as tooling guides (fence parts), and soles for repurposed molding planes. Boxwood is roughly twice as dense as Hard Maple. I kept expecting to see sparks by the way it felt, but it machined beautifully, and hand planes turn the surface into glass. Jointer knives weren't in the best shape, and I only used hand planes to smooth out the lines on the surfaces. We didn't need to run many feet of it, and I didn't use the best saw blades to rough it out, and will sharpen the Jointer and Planer knives before we start on the Heart Pine for the window sash. When I …

    • 0 replies
    • 2.8k views
  20. Started by splinterking,

    Hi a couple months back I bought a pile of 4/4 walnut from a cabinet shop that was closing. The deal was $30 for a pile with about 50-60 bf in it. So I took thinking thinking a project will come. Most of the boards are awesome, but a few are almost all white sap wood, I'm not complaining at that price. I'm just looking for some suggestions on uses for the sap wood. Is it worth dyeing or should I use it as paint grade? Or is there something else out there?

      • Like
    • 11 replies
    • 4.9k views
  21. I bought a katalox (2 x 2 x 24") and a bloodwood turning blank (2 x 2 x 18") because I needed a screenshot of a certain ecommerce site's checkout process for work. And they arrived, and they're pretty. But they're also sealed in wax and green (as far as the seller's concerned). First, removing the wax: heat to soften (if necessary), scrape, & mineral spirits for any residue? Any other alternatives? I figured I'd leave the ends sealed. Second, I'd be resawing them to 1" (well, minus the saw kerf) thick. I would be sculpting/carving them into training knives for martial arts, so the final dimensions are about .875 x 1.5 x 9". I know the rule for drying is 1 year…

    • 2 replies
    • 2.5k views
  22. Started by rodger.,

    Here is a few quick pics of a slab top I am working on. I hand planed it flat, and then cleaned it up with sandpaper (150 followed by 220). The issue is that the wood looks blotchy even before finish. I put some water on it to highlight what I am referring to. The base is cherry, and the top is pine (I think, I'm not quite sure as it was a random board/slab found in my friends garage). I kind of expected it to blotch around the knots, but is also blotchy in areas clear of knots. I plan on finishing it with oil based wipe on poly. Any ideas? Ps the colour match is much better than it appears on my iPad camera!

      • Like
    • 7 replies
    • 2.8k views
  23. I tried to order 2 meter profiles to place on my tablesaw and soon to be workbench router table combo. The profiles are not available anymore. The profiles were made of aluminum and I am trying to determine what wood would be a reasonable alternative. I do have the capability (I think) to order the aluminum and machine it to the desired dimensions, but working metal is not nearly as fun or relaxing as woodworking. So my question is what wood should I try. I figure I will need to go with a rather hard wood that is stable. Would hard maple be sufficient? Locally maple, walnut, oak, Osage orange, box elder, ash, elm and hickory are available. I can get some exotics with a bi…

    • 2 replies
    • 2.3k views
  24. Started by KustomKreation,

    Just had an inquiry about making this table. What wood is the table top, walnut? mahogany? or something else?

      • Like
    • 10 replies
    • 3k views
  25. Started by Milo,

    Recently, I saw some excellent examples of quality projects from quality pallet wood. It got me thinking, where can you find quality pallet wood? Good, solid hardwood pallets. What businesses would be most likely to receive stock from areas which would ship with hardwood pallets? What businesses receive stock from overseas that would have “exotic” wood pallets? My first thought was a flooring store. I have a lumber liquidators I thought of checking out. If you have any ideas on the subject, please share. Thanks, Milo

      • Like
    • 34 replies
    • 12.1k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.